Abstract
Computational human body models are widely used for automotive crashsafety research and design and as such have significantly contributed to a reduction of traffic injuries and fatalities. Currently crash simulations are mainly performed using models based on crash-dummies. However crash dummies differ significantly from the real human body and moreover crash dummies are only available for a limited set of body sizes. Models of the real human body offer some promising advantages including the prediction of injury mechanisms and injury criteria. In this paper, a review will be given of a number of developments in the field of occupant crash simulations in the past 40 years. Topics presented include history of occupant crash simulation codes, human body geometry, human body material modelling and model quality rating. A discussion on foreseen future developments in this field will conclude this paper.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Lobdell T.E., Impact response of the human thorax, in: Human Impact Response: Measurement and Simulation, Plenum Press, New York, 1973, pp. 201–245.
McHenry, R.R., Analysis of the dynamics of automobile passenger restraint systems, Proc. 7th Stapp Car Crash Conference, 1963, pp. 207–249.
Robbins, D.H., Bowman, B.M. and Bennett, R.O., The MVMA two-dimensional crash victim simulation, Proc. 18th Stapp Car Crash Conference, 1974, pp. 657–678.
Fleck, J.T., Butler, F.E. and Vogel, S.L., An improved three-dimensional computer simulation of motor vehicle crash victims, Final Technical Report No. ZQ-5180-L-1, Calspan Corp. (4 Vols.), 1974.
MADYMO Theory Manual, Version 6.2.1, TNO Automotive, Delft, the Netherlands, December 2004.
Prasad, P. and Chou, C.C., A review of mathematical occupant simulation models, Crashworthiness and occupant protection in transportation systems, Proceedings AMD-Vol. 106, BED-Vol. 13 of the Winter Annual Meeting of ASME, December 1989.
Wismans, J. and Obergefell, L., Data bases and analytical modelling, Chapter 8 in AGARD Advisary Report 330 Anthropomorphic Dummies for Crash and Escape System Testing, AGARD/AMP/WG21, 1996.
Shugar, T.A., A finite element head injury model, Final Report Vol 1 Contract DOT HS 289-3-550-IA, NHTSA, Washington DC, July 1977.
Hallquist, J.O., A procedure for the solution of finite deformation contact-impact problems by the finite element method, Report UCRL 52066, Lawrence Livermore Laboratory, Livermore, CA, 1976.
Bruijs, W.E.M., Subcycling in transient finite element analysis, PhD Thesis, Department of Mechanical Engineering, Eindhoven University of Technology, Eindhoven, the Netherlands, ISBN 90-9003684-9, 1990.
Prasad P., Comparative evaluation of the dynamic response of the Hybrid II and Hybrid III dummies, SAE Paper No. 902318, Proc. of the 34th Stapp Conference, 1990.
J. Wismans and Hermans, J.H.A., MADYMO 3D simulations of Hybrid III dummy sled tests', SAE Paper No. 880645, SAE PT-44, SAE Int. Congress and Exposition, Detroit, Society of Automotive Engineers Inc., 1988.
Baughman, L.D., Development of an interactive computer program to produce body description data, Report No. AFAMRL-TR-83-058, NTIS Doc. No. AD-A 133 720, University of Dayton Research Institute, Ohio, USA, 1983.
Geuß H., Entwicklung eines anthropometrischen Mebsystems für das CADMenschmodel Ramsis. PhD Thesis, München University, 1994.
Happee, R., Hoofman, M., van den Kroonenberg, A.J., Morsink. P. and Wismans, J., A mathematical human body model for frontal and rearward seated automotive impact loading”, in: Proceedings of the 42nd Stapp Car Crash Conference, Tempe, USA, November 2–4, 1998.
Happee R., Haaster R. van, Michaelsen L. and Hoffmann R., Optimisation of vehicle passive safety for occupants with varying anthropometry, ESV Conference 1998, Paper 98-S9-O-03, 1998.
Haug, E., Choi, H.-Y., Robin, S., and Beaugonin, M., Human models for crash and impact simulation, in: Handbook of Numerical Analysis, Vol. XII, P.G. Ciarlet (ed.), Elsevier, 2004.
Brands, D.W.A., Bovendeerd, P.H.M., Peters, G.W.M. and Wismans, J.S.H.M.. The large shear strain dynamic behaviour of in-vitro porcine brain tissue and a sillicone gel model material, Proceedings of the 44th Stapp Car Crash Conference, 2000.
Gefen, A. and Margulies, S.S., Are in vivo and in situ brain tissues mechanically similar? Journal of Biomechanics 37, 2004, 1339–1352.
Ashman, R.B., Cowin, S.C., Buskirk, W.C. van and Rice, J.C., A continuous wave technique for the measurement of the elastic properties of cortical bone, Journal of Biomechanics 17, 1984, 349–361.
Fung, Y.C., Biomechanics: Mechanical Properties of Living Tissues, Springer-Verlag, New York, 1981.
Woo, S.L.-Y., Hollis, J.M., Adams, D.J., Lyon, R.M., and Takai, S., Tensile properties of the human femur-anterior cruciate ligament-tibia complex. The effects of specimen age and orientation, American Journal of Sports Medicine 19, 1991, 217–225.
Hill, A.V., First and last experiments in Muscle Mechanics, Cambridge, 1970.
Prasad, P., Occupant simulation models: experiment and practice, in: Crashworthiness of Transportation Systems: Structural Impact and Occupant Protection, J.A.C. Ambrosio et. al. (eds), Kluwer Academic Publishers, 1997, pp. 209–219.
Hoof J van, Puppini R., Baldauf H., Oakley C. and Kayvantash K., Adviser: A software tool for evaluation and rating of numerical models in crash safety analyses, ESV Conference 2003, Paper No. 483, 2003.
Rooij, L. van, Bours, R., Hoof, J. van, Mihm, J.J., Ridella, S.A., Bass, C.R. and Crandall, J.R., The development, validation and application of a finite element upper extremity model subjected to air bag loading, Stapp Car Crash Journal, Vol. 47, 2003.
Verver M.M., Hoof J. van, Oomens C.W.J., Wouw N. van de and Wismans J.S.H.M., Estimation of spinal loading in vertical vibrations by numerical simulation, Clinical Biomechanics 18(9), 2003, 800–811.
Horst, van der M., Human head neck response in frontal, lateral and rear end impact loading — modelling and validation, PhD Thesis, Eindhoven University of Technology, ISBN 90-386-2843-9, 2002.
Happee R., Ridella S., Nayef A., Morsink P., de Lange R., Bours R. and van Hoof J., Mathematical human body models representing a mid size male and a small female for frontal, lateral and rearward impact loading, IRCOBI Conference, 2000.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2005 Springer
About this paper
Cite this paper
Wismans, J., Happee, R., van Dommelen, J. (2005). Computational Human Body Models. In: Gilchrist, M.D. (eds) IUTAM Symposium on Impact Biomechanics: From Fundamental Insights to Applications. Solid Mechanics and Its Applications, vol 124. Springer, Dordrecht. https://doi.org/10.1007/1-4020-3796-1_43
Download citation
DOI: https://doi.org/10.1007/1-4020-3796-1_43
Publisher Name: Springer, Dordrecht
Print ISBN: 978-1-4020-3795-5
Online ISBN: 978-1-4020-3796-2
eBook Packages: EngineeringEngineering (R0)