Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsPreview
Unable to display preview. Download preview PDF.
References
Aytug, T., Wu, J.Z., Cantoni, C., Verebelyi, D.T., Specht, E.D., Paranthaman, M., Norton, D.P., Christen, D.K., Ericson, R.E., and Thomas, C.L., 2000a, Growth and superconducting properties of YB2Cu3O7−δ films on conductive SrRuO3 and LaNiO3 multilayers for coated conductor applications, Appl. Phys. Lett., 76:760.
Aytug, T., Wu, J.Z., Kang, B.W., Verebelyi, D.T., Cantoni, C., Specht, E.D., Goyal, A., Paranthaman, M., and Christen, D.K., 2000b, An all-sputtered buffer layer architecture for high-Jc YB2Cu3O7−δ coated conductors, Physica C, 340:33.
Basting, D., ed., 2001, Excimer Laser Technology: Laser Sources, Optics, Systems and Applications, Lambda Physik, Göttingen.
Blank, D.H.A., Koster, G., Rijnders, G.A.J.H.M., van Setten, E., Slycke, P., and Rogalla, H., 2000, Epitaxial growth of oxides with pulsed laser interval deposition, J. Cryst. Growth, 211:98.
Boffa, V., Petrisor, T., Ciontea, L., Gambardella, U., and Barbanera, S., 1997, High-quality surface YBCO thin films prepared by off-axis pulsed laser deposition technique, Physica C, 276:218.
Boffa, V., Annino, C., Bettlinelli, D., Ceresara, C., Cioneta, L., Fabbri, F., Galluzzi, V., Gambardella, U., Celentano, G., Grimaldi, G., Mancini, A., Petrisor, T., and Scardi, P., 2000, Epitaxial growth of heterostructures on biaxially textured metallic substrates for YBa2Cu3O7−x tape fabrication, Phil. Mag., 80:979.
Chen, L.-C., 1994, Particulates generated by pulsed laser ablation, in: Pulsed Laser Deposition of Thin Films, D.H. Chrisey and G.K. Hubler, eds., John Wiley & Sons, Inc., New York.
Chen, P., Xu, S.Y., Lin, J., Ong, C.K., and Cui, D.F., 1999, Angle-resolved X-ray photoelectron spectroscopy of topmost surface for LaNiO3 thin film grown on SrTiO3 substrate by laser molecular beam epitaxy, Appl. Surf. Sci., 137:98.
Cheung, J.T., 1991, Method of thin film deposition using laser ablation, US Patent 5,049,405 (Sept. 17).
Cheung, J.T., 1995, Method of laser ablation for uniform thin film deposition, US Patent 5,411,772 (May 2).
Chrisey, D.B. and Hubler, G.K., eds., 1994, Pulsed Laser Deposition of Thin Films, John Wiley & Sons, New York.
Dance, D.L. and Jimenez, D.W., 1994, Applications of cost-of-ownership, Semicond. Int. (September).
Desserre, J. and Floy, J.F., 1975, Interaction of laser light beam pulses with complex targets: Application to production of compound thin films, Thin Solid Films, 29:29.
Dietsch, R., Holz, Th., Mai, H., Meyer, C.-F., Scholz, R., and Wehner, B., 1998, High precision large area PLD of X-ray optical multilayers, Appl. Surf. Sci., 127–129:451.
Dijkkamp, D., Venkatesan, T., Wu, X.D., Shaheen, S.A., Jisrawi, N., Min-Lee, Y.H., McLean, W.L., and Croft, M., 1987, Preparation of Y-Ba-Cu oxide superconductor thin films using pulsed laser evaporation from high-Tc bulk material, Appl. Phys. Lett., 51:619.
Dominguez, J.E., Fu, L., and Pan, X.Q., 2001, Epitaxial nanocrystalline tin dioxide thin films grown on (0001) sapphire by femtosecond pulsed laser deposition, Appl. Phys. Lett., 79:614.
Duhalde, S., Lamagna, A., Villafuerte, M., Schwartzman, A., Correra, L., and Quintana, G., 1998, Influence of the deposition parameters on the structural and transport properties of YbaCuO thin films prepared by pulsed laser deposition, Appl. Surf. Sci., 127–129:520.
Eres, G., Tischler, J.Z., Yoon, M., Larson, B.C., Rouleau, C.M., Lowndes, D.H., Zschack, P., and Chiang, T.C., 2001, Time resolved study of SrTiO3 homoepitaxial pulsed laser deposition using surface x-ray diffraction, to be published.
Feldmann, D.M., Reeves, J.L., Polyanskii, A.A., Kozlowski, G., Biggers, R.R., Nekkanti, R.M., Maartense, I., Topmsic, M., Barnes, P., Oberly, C.E., Peterson, T.L., Babcock, S.E., and Larbalestier, D.C., 2000, Influence of nickel substrate grain structure on YBa2Cu3O7−x supercurrent connectivity in deformation-textured coated conductors, Appl. Phys. Lett., 77:2906.
Foltyn, S.R., 1994, Surface modification of materials by cumulative laser irradiation, in: Pulsed Laser Deposition of Thin Films, D.H. Chrisey and G.K. Hubler, eds., John Wiley & Sons, Inc., New York.
Foltyn, S.R., Arendt, P.N., Dowden, P.C., DePaula, R.F., Groves, J.R., Coulter, J.Y., Jia, Q., Maley, M.P., and Peterson, D.E., 1999a, High-Tc coated conductors—performance of meter-long YBCO/IBAD flexible tapes, IEEE Trans. Appl. Supercond., 9:1519.
Foltyn, S.R., Jia, Q.X., Arendt, P.N., Kinder, L., Fan, Y., and Smith, J.F., 1999b, Relationship between film thickness and the critical current of YBa2Cu3O7−δ-coated conductors, Appl. Phys. Lett, 75:3691.
Foltyn, S.R., Dowden, P.C., Arendt, P.N., and Coulter, J.Y., 2000, Extremely high rate pulsed laser deposition of YBCO, presentation at the Annual Peer Review of the Department of Energy’s Superconductivity Program for Electric Systems, Washington, DC, July 17–19.
Foltyn, S.R., Jia, Q.X., Dowden, P.C., Arendt, P.N., Smith, J.F., Holesinger, T.G., Kung, H., Coulter, J.Y., Gibbons, B.J., Jan, D.B., DePaula, R.F., Stan, L., and Groves, J.R., 2001, High current coated conductors based on IBAD YSZ and thick YBCO/Sm-123 multilayers, presentation at the Annual Peer Review of the Department of Energy’s Superconductivity Program for Electric Systems, Washington, DC, August 1–3.
Fujino, K., Takano, S., Yoshida, N., Hara, T., and Ishii, H., 1996, 1997, Oxide superconducting film manufacturing apparatus, US Patent 5,489,338 (Feb. 6) and 5,601,649 (Feb. 11).
Geohegan, D.B., 1994, Diagnostics and characteristics of laser-produced plasmas, in: Pulsed Laser Deposition of Thin Films, D.H. Chrisey and G.K. Hubler, eds., John Wiley & Sons, Inc., New York.
Geohegan, D.B. and Puretzky, A.A., 1996, Laser ablation plume thermalization dynamics in background gases: Combined imaging, optical absorption and emission spectroscopy, and ion probe measurements, Appl. Surf. Sci., 96–98:131.
Geohegan, D.B., Puretzky, A.A., and Rader, D.J., 1999, Gas-phase nanoparticles formation and transport during pulsed laser deposition of Y1Ba2Cu3O7−d, Appl. Phys. Lett., 74:3788.
Gorbunov, A.A., Pompe, W., Sewing, A., Gaponov, S.V., Akhsakhalyan, A.D., Zabrodin, I.G., Kas’kov, I.A., Klyenkov, E.B., Morozov, A.P., Salaschenko, N.N., Dietsch, R., Mai, H., and Völlmar, S., 1996, Ultrathin film deposition by pulsed laser ablation using crossed beams, Appl. Surf. Sci., 96–98:649.
Gottmann, J. and Kreutz, E.W., 1999, Pulsed laser deposition of alumina and zirconia thin films on polymers and glass as optical and protective coatings, Surf. Coat. Technol., 116–119:1189.
Goyal, A., Norton, D.P., Kroeger, D.M., Christen, D.K., Paranthaman, M., Specht, E.D., Budai, J.D., He, Q., Saffian, B., List, F.A., Lee, D.F., Hatfield, E., Martin, P.M., Klabunde, C.E., Mathis, J., and Park, C., 1997, Conductor with controlled grain boundaries: An approach to the next generation, high-temperature superconducting wire, J. Mater. Res., 12:2924.
Goyal, A., Ren, S.X., Specht, E.D., Kroeger, D.M., Feenstra, R., Norton, D., Paranthaman, M., Lee, D.F., and Christen, D.K., 1999, Texture formation and grain boundary networks in rolling assisted biaxially textured substrates and in epitaxial YBCO films on such substrates, Micron, 30:463.
Greer, J.A., 1994, Commercial scale-up of pulsed laser deposition, in: Pulsed Laser Deposition of Thin Films, D.H. Chrisey and G.K. Hubler, eds., John Wiley & Sons, Inc., New York.
Greer, J.A. and Tabat, M.D., 1995, Large-area pulsed laser deposition: techniques and applications, J. Vac. Sci. Technol. A, 13:1175.
Greer, J.A. and Tabat, M.D., 1995, On-and off-axis large-area pulsed laser deposition, in: Film Synthesis and Growth Using Energetic Beams, H.A. Atwater, J.T. Dickinson, D.H. Lowndes, and A. Polman, eds., Mater. Res. Soc., Pittsburgh.
Harshavardhan, K.S., Christen, H.M., Silliman, S.D., Talanov, V.V., Anlage, S.M., Rajeswari, R., and Claassen, J., 2001, Low-loss YBa2Cu3O7 films on flexible, polycrystalline yttria-stabilized zirconia tapes for cryoelectronic applications, Appl. Phys. Lett., 78:1888.
Hau, S.K., Wong, K.H., Chan, P.W., and Choy, C.L., 1995, Intrinsic resputtering in pulsed-laser deposition of lead-zirconate-titanate thin films, Appl. Phys. Lett., 66:245.
Hayashi, N. and Yoshida, N., 1995, Method of fabricating oxide superconducting films by laser deposition, US Patent 5,447,910 (September 5).
Henyk, M., Vogel, N., Wolfframm, D., Tempel, A., and Reif, J., 1999, Femtosecond laser ablation from dielectric materials: Comparison to arc discharge erosion, Appl. Phys. A, 69(Suppl.):S355.
Hirayama, Y., Yabe, H., and Obara, M., 2001, Selective ablation of AlN ceramic using femtosecond, nanosecond, and microsecond pulsed laser, J. Appl. Phys., 89:2943.
Horwitz, J.S. and Sprague, J.A., 1994, Film nucleation and film growth in pulse laser deposition of ceramics, in: Pulsed Laser Deposition of Thin Films, D.H. Chrisey and G.K. Hubler, eds., John Wiley & Sons, Inc., New York.
Huang, X.T., Wang, Y.Q., Wang, Q.L., and Chen, Q.M., 2000, In-plane aligned YBCO film on textured YSZ buffer layer deposited on NiCr alloy tape by laser ablation with only O+ ion beam assistance, J. Phys.: Condens. Matter, 12:761.
Iijima, Y., Kakimoto, K., Takeda, K., and Saitoh, T., 2001, Long length IBAD process of fluorite type oxides for Y-123 coated conductors, presented at the 2001 International Workshop on Superconductivity, co sponsored by ISTEC and MRS,“HTS Conductors, Processing and Applications,” Honolulu, Hawaii, June 24–27.
Kabashin, A.V., Marine, W., Nikitin, P.I., and Sentis, M., 1996, Electromagnetic diagnostics during pulsed laser deposition, Appl. Surf. Sci., 96–98:139.
Kelly, R. and Miotello, A., 1994, Mechanisms of pulsed laser sputtering, in: Pulsed Laser Deposition of Thin Films, D.H. Chrisey and G.K. Hubler, eds., John Wiley & Sons, Inc., New York.
Kerchner, H.R., Norton, D.P., Goyal, A., Budai, J.D., Christen, D.K., Kroeger, D.M., Specht, E.D., He, Q., Paranthaman, M., Lee, D.F., Sales, B.C., List, F.A., and Feenstra, R., 1997, Alternating current losses in biaxially textured YB2Cu3O7−δ films on Ni tapes, Appl. Phys. Lett., 71:2029.
Kim, J., Chrisey, D.B., Howitz, J.S., Miller, M.M., and Gilmore, C.M., 2000, Growth mechanism of YBa2Cu3O7−δ thin films and precipitates on planar and vicinal SrTiO3 substrates, J. Mater. Res., 15:596.
Kinoshita, K., Ishibashi, H., and Kobayashi, T., 1994, Improved surface smoothness of YBa2Cu3Oy films and related multilayers by ArF excimer laser deposition with shadow mask “Eclipse method”, Jpn. J. Appl. Phys. 2, Lett., 33:L417.
Koinuma, H., Kawasaki, M., Ohashi, S., Lippmaa, M., Nakagawa, N., Iwasaki, M., and Qiu, X.G., 1998, Nucleation and growth control in pulsed laser epitaxy of oxide thin films, Proc. SPIE, 3481:153.
Koren, G., Baseman, R.J., Gupta, A., Lutwyche, M.I., and Laibowitz, R.B., 1990, Particualtes reduction in laser-ablated YBa2Cu3O7−δ thin films by laser-induced plume heating, Appl. Phys. Lett., 56:2144.
Kusumori, T. and Muto, H., 2000, Effect of target composition on the crystallinity of YB2Cu3Oy epitaxial films fabricated by Nd:YAG pulsed laser deposition, Physica C, 337:57.
Laube, S.J.P. and Stark, E.F., 1996, Hierarchical feedback control of pulsed laser deposition, US Patent 5,535,128 (July 9).
Laube, S.J.P. and Voevodin, A.A., 1998, Pulsed laser deposition, in-situ process modeling and feedback control for multi-layer deposition, Surf. Coatings Technol., 99:14.
Lee, D.F., Paranthaman, M., Mathis, J.E., Goyal, A., Kroeger, D.M., Specht, E.D., Williams, R.K., List, F.A., Martin, P.M., Park, C., Norton, D.P., and Christen, D.K., 1999, Alternative buffer architectures for high critical current density YBCO superconducting deposits on rolling assisted biaxially-textured substrates, Jpn. J. Appl. Phys., 38:L178.
Li, Q., Liu, S., Fenner, D.B., Luo, J., Hamblen, W.D., and Higis, J., 1995, In-situ optical diagnostics during pulsed laser deposition of high-Tc superconductor thin films, IEEE Trans. Appl. Supercond., 5:1513.
List, F.A., Goyal, A., Paranthaman, M., Norton, D.P., Specht, E.D., Lee, D.F., and Kroeger, D.M., 1998, High Jc YBCO films on biaxially textured Ni with oxide buffer layers deposited using electron beam evaporation and sputtering, Physica C, 302:87.
Lorenz, M., Hochmuth, H., Natusch, D., Kusunoki, M., Svetchnikov, V.L., Riede, V., Stanca, I., Kästner, G., and Hesse, D., 2001, High-quality Y-Ba-Cu-O thin films by PLD-ready for market applications, IEEE Trans. Appl. Supercond., 11:3209.
Lowndes, D.H., Geohegan, D.B., Puretzky, A.A., Norton, D.P., and Rouleau, C.M., 1996, Synthesis of novel thin-film materials by pulsed laser deposition, Science, 273:898.
Maguire, J.F., Busbee, J.D., Liptak, D.C., Lubbers, D.P., SeClair, S.R., and Biggers, R.R., 2000, Process control for pulsed laser deposition using Raman spectroscopy, US Patent 6,038,525 (March 14).
Millon, E., Albert, O., Loulergue, J.C., Etchepare, J., Hullin, D., Seiler, W., and Perriere, J., 2000, Growth of heteroepitaxial ZnO thin films by femtosecond pulsed-laser deposition, J. Appl. Phys., 88:6937.
Miotello, A. and Kelly, R., 1999, Laser-induced phase exposion: new physical problems when a condensed phase approaches the thermodynamic critical temperature, Appl. Phys. A, 69(Suppl.):S67.
Muenchausen, R.E., Hubbard, K.M., Foltyn, S., Estler, R.C., Nogar, N.S., and Jenkins, C., 1990, Effects of beam parameters on excimer laser deposition of YBa2Cu3O7−δ, Appl. Phys. Lett., 56:578.
Mukaida, M., Takano, Y., Chiba, K., Moriya, T., Kusunoki, M., and Ohshima, S., 1999, A new epitaxial BaSnO3 buffer layer for YBa2Cu3O7−δ thin films on MgO substrates, Supercond. Sci. Technol., 12:890.
Mukherjee, P., Cuff, J.B., and Witanachchi, S., 1998, Plume expansion and stoichiometry in the growth of multi-component thin films using dual-laser ablation, Appl. Surf. Sci., 127–129:620.
Nakagawa, M.N., Kawasaki, M., Ohashi, S., and Koinuma, H., 2000, Growth mode mapping of SrTiO3 epitaxy, Appl. Phys. Lett., 76:2439.
Noda, E., Suzuki, S., Morimiya, O., and Hayashi, K., 1992, Method for manufacturing an oxide superconductor thin film, US Patent 5,158,931 (October 27).
Norton, D.P., 1998, Science and technology of high-temperature superconducting films, Annu. Rev. Mater. Sci., 28:299.
Ohashi, S., Lippmaa, M., Nakagawa, N., Nasagawa, H., Koinuma, H., and Kawasaki, M., 1999, Compact laser molecular beam epitaxy system using laser heating of substrate for oxide film growth, Rev. Sci. Instrum., 70:178.
Okoshi, M., Higashikawa, K., and Hanabusa, M., 2000, Pulsed laser deposition of ZnO thin films using a femtosecond laser, Appl. Surf. Sci., 154–155:424.
Park, C., Norton, D.P., Budai, J.D., Christen, D.K., Verebelyi, D., Feenstra, R., Lee, D.F., Goyal, A., Kroeger, D.M., and Paranthaman, M., 1998, Bend strain tolerance of critical currents for YBa2Cu3O7 films deposited on rolled-textured (001)Ni, Appl. Phys. Lett., 73:1904.
Park, C., Norton, D.P., Christen, D.K., Verebelyi, D.T., Feenstra, R., Budai, J.D., Goyal, A., Lee, D.F., Specht, E.D., Kroeger, D.M., and Paranthaman, M., 1999, Long length fabrication of YBCO on rolling assisted biaxially textured substrates (RABiTS) using pulsed laser deposition, IEEE Trans. Appl. Supercond., 9:2276.
Park, S.M. and Moon, J.Y., 2001, Laser ablation of a Pb(ZrxTi1−x)O3 target in a pulsed oxygen jet, Appl. Surf. Sci., 174:87.
Pique, A., Venkatesan, T., and Green, S., 1995, Pulsed laser passive filter deposition system, US Patent 5,458,686 (Oct. 17).
Puretzky, A.A., Geohegan, D.B., Jellison, G.E., Jr., and McGibbon, M.M., 1996, Comparative diagnostics of ArF-and KrF-laser generated carbon plumes used for amorphous diamond-like carbon film deposition, Appl. Surf. Sci., 96–98:859.
Qian, F., Craciun, V., Singh, R.K., Dutta, S.D., and Pronko, P.P., 1999, High intensity femtosecond laser deposition of diamond-like carbon thin films, J. Appl. Phys., 86:2281.
Reeves, J.L., Feldmann, D.M., Yang, C.-Y., and Larbalestier, D.C., 2001, Current barriers in Y-Ba-Cu-O coated conductors, IEEE Trans. Appl. Supercond., 11:3863.
Riabkina-Fishman, M. and Zahavi, J., 1993, Effect of processing conditions on superconductive properties of laser-deposited YBCO thin films, J. Mater. Sci., 28:3298.
Rijnders, G.J.H.M., Koster, G., Blank, D.H.A., and Rogalla, H., 1997, In situ monitoring during pulsed laser deposition of complex oxides using reflection high energy electron diffraction under high oxygen pressure, Appl. Phys. Lett., 70:1888.
Roas, B., Endres, G., and Schultz, L., 1993, Method for manufacturing oxide superconducting films by laser evaporation, US Patent 5,212,148 (May 18).
Rode, A.V., Luther-Davies, B., and Gamaly, E.G., 1999, Ultrafast ablation with high-pulse-rate lasers. Part II: Experiments on laser deposition of amorphous carbon films, J. Appl. Phys., 85:4222.
Samano, E.C., Machorro, R., Soto, G., and Cota-Araiza, L., 1998, In situ ellipsometric characterization of SiNx films grown by laser ablation, J. Appl. Phys., 84:5296.
Sato, Y., Matsuo, K., Takahashi, Y., Muranaka, K., Fujino, K., Hahakura, S., Ohmatsu, K., and Takei, H., 2001, Development of YBa2Cu3Oy tape by using inclined substrate method, IEEE Trans. Appl. Supercond., 11:3365.
Schenck, P.K., Vaudin, M.D., Bonnell, D.W., Hastie, J.W., and Paul, A.J., 1998, Particulate reduction in the pulsed laser deposition of barium titanate thin films, Appl. Surf. Sci., 127–129:655.
Schey, B., Bollmeier, T., Kuhn, M., Biegel, W., and Stritzker, B., 1998, Large area deposition of YBa2Cu3O7−x films by pulsed laser ablation, Rev. Sci. Instrum., 69:474.
Schwarz, H. and Tourtellotte, H.A., 1969, Vacuum deposition high-energy laser with emphasis on barium titanate films, J. Vac. Sci. Technol., 6:373.
Shirk, M.D. and Molian, P.A., 2001, Ultra-short pulsed laser ablation of highly oriented pyrolytic graphite, Carbon, 39:1183.
Smith, H.M. and Turner, A.F., 1965, Vacuum deposited thin films using a Ruby laser, Appl. Opt., 4:147.
Strikovski, M. and Miller, J.H., Jr., 1998, Pulsed laser deposition of oxides: Why the optimum rate is about 1 Å per pulse, Appl. Phys. Lett., 73:1733.
Strikovski, M., Miller, J.H., Jr., and Wosik, J., 2000, Deposition rate as the key parameter in pulsed laser deposition of oxide films: A practical model and experiment, Physica C, 341–348:2349.
Szorenyi, T., Fogarassy, E., Fuchs, C., Hommet, J., and Le Normand, F., 1999, Chemical analysis of a-CNx thin films synthesized by nanosecond and femtosecond pulsed laser deposition, Appl. Phys. A, 69(Suppl.):941.
Tanaka, H. and Kawai, T., 2000, Artificial construction of SrO/(La,Sr)MnO3 layered perovskite superlattice by laser molecular-beam epitaxy, Appl. Phys. Lett., 76:3618.
Tselev, A., Gorbunov, A., and Pompe, W., 2001, Cross-beam pulsed laser deposition: General characteristic, Rev. Sci. Instrum., 72:2665.
Usoskin, A., Knoke, J., García-Moreno, F., Issaev, A., Dzick, J., Sievers, S., and Freyhardt, H.C., 2001a, Large-area HTS-coated stainless steel tapes with high critical currents, IEEE Trans. Appl. Supercond., 11:3385.
Usoskin, A., Sturn, K., Knoke, J., Issaev, A., García-Moreno, F., Dzick, J., and Freyhardt, H.C., 2001b, Long-length YBCO coated stainless steel tapes produced by HR-PLD, presented at the 5thEuropean Conf. on Appl. Supercond. (EUCAS, 2001), Aug. 26–30, Copenhagen, Denmark. To be published in Physica C.
Venkatesan, T. and Wu, X.D., 1991, Method and apparatus for pulsed energy induced vapor deposition of thin films, US Patent 5,015,492 (May 14).
Wagner, F.X., Scaggs, M., Koch, A., Endert, H., Christen, H.M., Knauss, L.A., Harshavardhan, K.S., and Green, S.M., 1998, Epitaxial HTS thin films grown by PLD with a beam homogenizer, Appl. Surf. Sci., 127–129:477.
Wang, R.P., Zhou, Y.L., Pan, S.H., He, M., Lu, H.B., Chen, Z.H., Yang, G.Z., Liu, C.F., Wu, X., Wang, F.Y., Feng, Y., Zhang, P.X., Wu, X.Z., and Zhou, L., 2000, Deposition of high-temperature superconducting films on biaxially textured Ni(001) substrates, Physica C, 337:87.
Watson, T.A. and Rowan, C., 1996, Industrial excimer laser beam properties, Appl. Surf. Sci., 96–98:532.
Weissmantel, S., Reisse, G., Keiper, B., and Schulze, S., 1999, Microstructure and mechanical properties of pulsed laser deposited boron nitride films, Diam. Relat. Mater., 8:377.
Willmott, P.R. and Antoni, F., 1998, Growth of GaN(0001) thin films on Si(001) by pulsed reactive crossed-beam laser ablation using liquid Ga and N2, Appl. Phys. Lett., 73:1394.
Willmott, P.R. and Huber, J.R., 2000, Pulsed laser vaporization and deposition, Rev. Mod. Phys., 72:315.
Witanachchi, S., Ahmed, K., Sakthivel, P., and Mukherjee, P., 1995, Dual-laser ablation for particulate-free film growth, Appl. Phys. Lett., 66:1469.
Xiong, X. and Winkler, D., 2000, Rapid deposition of biaxially-textured CeO2 buffer layers on polycrystalline nickel alloy for superconducting tapes by ion assisted pulse laser deposition, Physica C, 336:70.
Xu, S.Y., Ong, C.K., You, L.P., Li, J., and Wang, S.J., 2000, The growth mode and microstructure of Ag-doped YB2Cu3O7−δ thin films prepared by dual beam pulsed-laser deposition, Physica C, 341–348:2345.
Yang, G.Z., Lu, H.B., Chen, F., Zhao, T., and Chen, Z.H., 2001, Laser molecular beam epitaxy and characterization of perovskite oxide thin films, J. Cryst. Growth, 227–228:929.
Zaitsev-Zotov, S.V., Martynyuk, R.A., and Protasov, E.A., 1983, Superconductivity of BaPb1−x BixO3 films prepared by laser evaporation method, Sov. Phys. Solid State, 25:100.
Zander, W., Stritzker, B., and Frohlingsdorf, J., 1992, Apparatus for the ablation of material from a target and coating method and apparatus, US Patent 5,084,300 (January 28).
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2005 Kluwer Academic Publishers
About this chapter
Cite this chapter
Christen, H.M. (2005). Pulsed Laser Deposition of YBa2Cu2O7−δ for Coated Conductor Applications: Current Status and Cost Issues. In: Goyal, A. (eds) Second-Generation HTS Conductors. Springer, Boston, MA. https://doi.org/10.1007/0-387-25839-6_5
Download citation
DOI: https://doi.org/10.1007/0-387-25839-6_5
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4020-8117-0
Online ISBN: 978-0-387-25839-3
eBook Packages: EngineeringEngineering (R0)