Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Andreen, C.J. and Hines, R.L., 1966, Channeling of D+ and He+ ions in a gold crystals, Phys. Rev., 151:341.
Arendt, P., Foltyn, S., Wu, X., Townsend, J., Adams, C., Hawley, M., Tiwari, P., Maley, M., Willis, J., Mosley, D., and Coulter, Y., 1994, Fabrication of biaxially oriented yttria-stabilized zirconia on polycrystalline substrates, Mater. Res. Soc. Symp. Proc., 341:209.
Arendt, P.N., Foltyn, S.R., Groves, J.R., DePaula, R.F., Dowden, P.C., Roper, J.M., and Coulter, J.Y., 1998, YBCO/YSZ coated conductors on flexible Ni-alloy substrates, Appl. Supercond., 4:429.
Arendt, P., Foltyn, S., Groves, J., Holesinger, T., Kung, H., Jia, Q., Peterson, E., DePaula, R., Dowden, P., Coulter, Y., and Stan, L., 2000a, MgO templates for YBCO coated conductors, Superconductivity Program for Electrical Systems, 2000 Annual Peer Review, Washington, DC, July 17–19.
Arendt, P.N., Groves, J.R., Foltyn, S.R., Jia, Q.X., Peterson, E.J., DePaula, R.F., Dowden, P.C., Coulter, J.Y., and Ma, M., 2000b, Fabrication of high-quality ion-beam deposited cubic oxide template films on meter-length substrates, Mater. Res. Soc. Symp. Proc., 585:67.
Arendt, P.N., 2001, IBAD MgO templates for coated conductors, Superconductivity Program for Electrical Systems, 2001 Annual Peer Review, Washington, DC, August 1–3.
Atrei, A., Roveda, G., Torrini, M., Bardi, U., Gleeson, M., and Barnes, C.J., 1997, The growth mechanism and structure of ultrathin cobalt films deposited on the Pd(111) surface, Surf. Sci., 372:91.
Balachandran, B., 2000, Development of coated conductors—practical and fundamental issues, Superconductivity Program for Electrical Systems, 2000 Annual Peer Review, Washington, DC, July 17–19.
Balachandran, B. and Gray, K., 2000, Development of coated conductors—practical and fundamental issues, Superconductivity Program for Electrical Systems, 2000 Annual Peer Review, Washington, DC, July 17–19.
Bauer, M., Semerad, R., and Kinder, H., 1999, YBCO films on metal substrates with biaxially aligned MgO buffer layers, IEEE Trans. Appl. Supercond., 9:1502.
Bradley, R.M., Harper, J.M.E., Cuomo, J.J., and Smith, D.A., 1986, Theory of thin-film orientation by ion bombardment during deposition, J. Appl. Phys., 60:4160.
Chudzik, M.P., Erck, R., Lanlagan, M.T., and Kannewurf, C.R., 1999, Processing dependence of biaxial texture in yttria-stabilized zirconia by ion-beam-assisted deposition, IEEE Trans. Appl. Supercond., 9:1490.
Dimos, D., Chaudhari, P., Mannhart, J., and LeGoues, J., 1989, Orientation dependence of grain-boundary critical currents in YBa2Cu3O7−δ bicrystals, Phys. Rev. Lett., 55:2442.
Do, K.B., Wang, C.P., Marshall, A., Geballe, T.H., Beasley, M.R., and Hammond, R.H., 1995, Control of biaxial texture of MgO thin films by ion-beam assisted deposition (IBAD), Fall MRS Meeting, Boston, MA, Nov. 27–Dec. 1.
Dobrev, D., 1982, Ion-beam-induced texture formation in vacuum-condensed thin metal films, Thin Solid Films, 92:41.
Dobrev, D. and Marinov, M., 1973, Effect of ion bombardment on crystallographic orientation in vacuumcondensed metal films, C. R. Acad. Bulg. Sci., 26:231.
Dobrev, D. and Marinov, M., 1975, Effect of ion bombardment on the structure of vacuum-condensed metal films, Bulg. Acad. Sci. Comm. Dept. Chem., 8:334.
Doi, T.J., Yuasa, T., Ozawa, T., and Higashiyama, K., 1994, A new type of superconducting wire; biaxially oriented Tl1(Ba0.8SrO0.2)2Ca2Cu3O9 on {100}<100> textured silver tape, Adv. Supercond. VII, 6:817.
Doi, T., Hakuraku, Y., Higashiyama, K., Akata, H., Osumara, K., Kashima, N., and Nagaya, S., 2000, Biaxially oriented NdBa2Cu3O7 films prepared on {100}<100> textured Ag tapes without any buffer layer, Appl. Supercond. Conf., Virginia Beach, VA, September 17–22.
Dzick, J., Wiesmann, J., Hoffmann, J., Heinemann, K., Garcia-Moreno, F., Isaev, A., Freyhardt, H.C., and Lechner, W., 1999, YSZ buffer layers on large technical substrates, IEEE Trans. Appl. Supercond., 9:2248.
Dzick, J., Sievers, S., Hoffman, J., Kautschor, L.-O., and Freyhardt, H.C., 2000, Mechanisms of ion-beam assisted texturing of YSZ layers, Fall MRS Meeting, Boston, MA, Nov. 27–Dec. 1.
Dzick, J., Hoffmann, J., Sievers, S., Kautschor, L.O., and Freyhardt, H.C., 2001, Ion-beam-assisted texturing of YSZ layers, 5 th European Conference on Applied Superconductivity, Copenhagen, Denmark, August 26–30 (paper submitted to Physica C).
Feenstra, R., 1999, An ex situ processed YBCO coated conductor, Superconductivity Program for Electrical Systems, 1999 Annual Peer Review, Washington, DC, July 26–27.
Feenstra, R., Christen, D.K., Verebelyi, D.T., Lee, D.F., Paranthaman, M., Goyal, A., Kang, B.W., Lu, S.W., Martin, P.M., and Kroeger, D.M., 2000, Enhancing the current transport in ex situ processed YBCO coated conductors, Fall MRS Meeting, Nov. 27–Dec. 1.
Feenstra, R., Goyal, A., Paranthaman, M., Lee, D.F., Martin, P.M., Christen, D.K., Kroeger, D.M., Arendt, P.N., Groves, J.R., and DePaula, R.F., 2001, High-I c YBCO coated conductors produced by an ex situ BaF2 process, in: Proc. Int. Workshop on Superconductivity, Honolulu, HI, p. 146.
Foltyn, S.R., 1995, Spring Materials Research Society Meeting, San Francisco, CA, April 17.
Foltyn, S.R., 1996, Superconductivity Program for Electrical Systems, 1996 Annual Peer Review, Washington, DC, July 31–Aug. 1.
Foltyn, S.R., 1997, Superconductivity Program for Electrical Systems, 1997 Annual Peer Review, Washington, DC, July 21–23.
Foltyn, S.R., 1998, Superconductivity Program for Electrical Systems, 1998 Annual Peer Review, Washington, DC, July 20–22.
Foltyn, S.R., 1999, Superconductivity Program for Electrical Systems, 1999 Annual Peer Review, Washington, DC, July 26–27.
Foltyn, S., 2000, Toward a 1000 A coated conductor: Increasing the I c of thick YBCO films, Superconductivity Program for Electrical Systems, 2000 Annual Peer Review, Washington, DC, July 17–19.
Foltyn, S.R., 2001, High current coated conductors based on IBAD YSZ and thick YBCO/Sm-123 multilayers, Superconductivity Program for Electrical Systems, 2001 Annual Peer Review, Washington, DC, August 1–3.
Foltyn, S.R., Tiwari, P., Dye, R.C., Le, M.Q., and Wu, X.D., 1993, Pulsed laser deposition of thick YBa2Cu3O7−δ films with J c > 1 MA/cm2, Appl. Phys. Lett., 63:1848.
Foltyn, S.R., Arendt, P.N., Dowden, P.C., DePaula, R.F., Groves, J.R., Coulter, J.Y., Jia, Q.X., Maley, M.P., and Peterson, D.E., 1999, High-T c coated conductors—performance of meter-long YBCO/IBAD flexible tapes, IEEE Trans. Appl. Supercond., 9:151.
Foltyn, S.R., Arendt, P.N., DePaula, R.F., Dowden, P.C., Coulter, J.Y., Groves, J.R., Haussamen, L.N., Winston, L.P., Jia, Q.X., and Maley, M.P., 2000, Development of meter-long YBCO coated conductors produced by ion beam assisted deposition and pulsed laser deposition, Physica C, 341–348:2305.
Fork, D.K., Fenner, D.B., Barton, R.W., Phillips, J.M., Connel, G.A.N., Boyce, J.B., and Geballe, T.H., 1990, Synthesis of superconducting YBa2Cu3O7−δ thin films on nickel-based superalloy using in situ pulsed laser deposition, Appl. Phys. Lett., 57:1161.
Freyhardt, H.C., Hoffman, J., Weismann, J., Dzick, J., Heinemann, K., Isaev, A., Garcia-Moreno, F., Sievers, S., and Usoskin, A., 1997, YBaCuO thick films on planar and curved technical substrates, IEEE Trans. Appl. Supercond., 7:1426.
Freyhardt, H.C., Hoffmann, J., Wiesmann, J., Dzick, J., Heinemann, K., Issaev, A., Usoskin, A., and Garcia-Moreno, F., 1998, Y-123 films on technical substrates, Appl. Supercond., 4:435.
Fujino, K., Hasegawa, K., Mukai, H., Sato, K., Hara, T., Ohkuma, T., Ishii, H., and Honjo, S., 1995, 1 meter long thin film tape with high J c of 1.5 × 105 A/cm2 fabricated by pulsed laser deposition, Adv. Supercond. VIII, 7:675.
Garcia-Moreno, F., Usoskin, A., Freyhardt, H.C., Issaev, A., Wiesmann, J., Hoffmann, J., Heinemann, K., Sievers, S., and Dzick, J., 1999, Laser deposition of YBCO on long-length technical substrates, IEEE Trans. Appl. Supercond., 9:2260.
Gnanarajan, S. and Saavides, N., 1999, Evolution of texture of CeO2 thin film buffer layers prepared by ion-assisted deposition, Thin Solid Films, 350:124.
Goyal, A., 2000, Fundamental issues for coated conductors, Superconductivity Program for Electrical Systems, 2000 Annual Peer Review, Washington, DC, July 17–19.
Goyal, A., Norton, D.P., Budai, J.D., Paranthaman, M., Specht, E.D., Kroeger, D.M., Christen, D.K., He, Q., Saffian, B., List, F., Lee, D.F., Martin, P.M., Klabunde, C.E., Hartfield, E., and Sikka, V.K., 1996, High critical current density superconducting tapes by epitaxial deposition of YBa2Cu3Ox thick films on biaxially textured substrates, Appl. Phys. Lett., 69:1795.
Groves, J.R., Arendt, P.N., Foltyn, S.R., DePaula, R.F., Peterson, E.J., Holesinger, T.G., Coulter, J.Y., Springer, R.W., Wang, C.P., and Hammond, R.H., 1999, Ion-beam assisted deposition of bi-axially aligned MgO template films for YBCO coated conductors, IEEE Trans. Appl. Supercond., 9:1964.
Groves, J.R., Arendt, P.N., Jia, Q.X., Foltyn, S.R., DePaula, R.F., Kinder, L.R., Fan, Y., and Peterson, E.J., 2000, High critical current density PLD YBCO deposited on highly textured IBADMgO buffer layers, Ceram. Trans., 104:219.
Groves, J.R., Arendt, P.N., Kung, H., Foltyn, S.R., DePaula, R.F., Emmert, L.A., and Storer, J.G., 2001a, Texture development in IBAD MgO films as a function of deposition thickness and rate, IEEE Trans. Appl. Supercond., 11:2822.
Groves, J.R., Arendt, P.N., Foltyn, S.R., Jia, Q.X., Holesinger, T.G., Kung, H., Peterson, E.J., DePaula, R.F., Dowden, P.C., Stan, L., and Emmert, L., 2001b, High critical current density YBa2Cu3O7−δ thick films using IBAD MgO bi-axially oriented template layers on nickel-based superalloy substrates, J. Mater. Res., 16:2175.
Groves, J.R., Yashar, P.C., Arendt, P.N., DePaula, R.F., Peterson, E.J., and Fitzsimmons, M.J., 2001c, Ultrathin biaxially textured IBAD MgO template layers resolved by grazing incidence x-ray diffraction, Physica C, 355:293.
Groves, J.R., Arendt, P.N., Foltyn, S.R., Jia, Q.X., DePaula, R.F., Dowden, P.C., Kung, H., Holesinger, T.G., Stan, L., Emmert, L.A., and Peterson, E.J., in press, Ion-beam assisted deposition of MgO with in situ RHEED monitoring to control bi-axial texture, Mater. Res. Soc. Symp. Proc.
Hammond, R.H., 1995, Thick film YBCO for wires and tapes: Scale-up issues and cost estimates, Adv. Supercond. VIII, 7:1029.
Hammond, R.H. and Matijasevic, V., 1998, DOE Grain Boundary Workshop, Chantilly, VA, July 22–23.
Harper, J.M.E., Rodell, K.P., Colgan, E.G., and Hammond, R.H., 1997, Control of in-plane texture of body centered cubic metal thin films, J. Appl. Phys., 82:4319.
Harshavardhan, K.S., Christen, H.M., Silliman, S.D., Talanov, V.V., Anlage, S.M., Rajeswari, M., and Claassen, J., 2001, Low-loss YBCO films on flexible polycrystalline yttria-stabilized zirconia tapes for cryoelectronic applications, Appl. Phys. Lett., 78:1888.
Holesinger, T.G., Foltyn, S.R., Arendt, P.N., Kung, H., Jia, Q.X., Dickerson, R.M., Dowden, P.C., De-Paula, R.F., Groves, J.R., and Coulter, J.Y., 2000a, The microstructure of continuously processed YBa2Cu3Oy coated conductors with underlying CeO2 and ion-beam assisted yttria-stabilized zirconia buffer layers, J. Mater. Res., 15:1110.
Holesinger, T., Foltyn, S., Arendt, P., Kung, H., Jia, Q., Dickerson, R.M., Dowden, P.C., DePaula, R.F., Groves, J.R., and Coulter, J.Y., 2000b, The effect of the final buffer layer thickness on microstructure development and transport properties in YBCO coated conductors, Superconductivity Program for Electrical Systems, 2000 Annual Peer Review, Washington, DC, July 17–19.
Holesinger, T.G., Foltyn, S.R., Arendt, P.N., Jia, Q.X., Dowden, P.C., DePaula, R.F., and Groves, J.R., 2001, A comparison of buffer layer architectures on continuously processed YBCO coated conductors based on the IBAD YSZ process, IEEE Trans. Appl. Supercond., 11:3359.
Holzapfel, B., Betz, V., Arranz, M.A., Reger, N., and Schultz, L., 1998, Laser ablated buffer layers for YBCO-tape conductors, Mater. Res. Soc. Symp. Proc., 526:257.
Hosaka, M., Iijima, Y., Sadakata, N., Saitoh, T., Kohno, O., and Yoshitomi, J., 1997, Long and high J c YBCO tapes using continuously deposited YSZ buffer layers by IBAD method, Adv. Supercond. X, 9:749.
Huang, M.Q., Geerk, J., Massing, S., Meyer, O., Reiner, H., and Linker, G., 1999, Textured CeO2 buffer layers on amorphous substrates by ion beam assisted deposition, Nucl. Inst. Meth. Phys. Res. B, 148:793.
Huhne, R., Beyer, C., Holzapfel, B., Oertel, C.-G., Schultz, L., and Skrotzki, W., 2000, Growth of biaxial textured MgO layers by ion-beam assisted pulsed laser deposition, Cryst. Res. Technol., 35:419.
Iijima, Y., Tanabe, N., Ikeno, Y., and Kohno, O., 1991, Biaxially aligned YBa2Cu3O7−x thin film tapes, Physica C, 185:1959.
Iijima, Y., Tanabe, N., Kohno, O., and Ikeno, Y., 1992, In-plane aligned YBa2Cu3O7−x thin films deposited on polycrystalline metallic substrates, Appl. Phys. Lett., 60:769.
Iijima, Y., Onabe, K., Futaki, N., Tanabe, N., Sadakata, N., Kohno, O., and Ikeno, Y., 1993a, In-plane texturing control of Y-Ba-Cu-O thin films on polycrystalline substrates by ion-beam-modified intermediate buffer layers, IEEE Trans. Appl. Supercond., 3:1510.
Iijima, Y., Onabe, K., Futaki, N., Tanabe, N., Sadakata, N., Kohno, O., and Ikeno, Y., 1993b, Structural and transport properties of biaxially aligned YBa2Cu3O7−δ films on polycrystalline Ni-based alloy with ion-beam modified buffer layers, J. Appl. Phys., 74:1905.
Iijima, Y., Onabe, K., Tanabe, N., Sadakata, N., Saitoh, T., Kohno, O., and Yoshitomi, J., 1995, High current laser-ablated YBCO tape with biaxially aligned structure, Adv. Supercond. VIII, 7:613.
Iijima, Y., Hosaka, M., Tanabe, N., Sadakata, N., Saitoh, T., Kohno, O., and Yoshitomi, J., 1996, Fabrication of high-J c YBCO tapes using continuously deposited YSZ buffer layers by IBAD method, Adv. Supercond. IX, 8:659.
Iijima, Y., Hosaka, M., Tanabe, N., Sadakata, N., Kohno, O., and Takeda, K., 1998, Growth structure of yttria-stabilized-zirconia films during off-normal ion-beam assisted deposition, J. Mater. Res., 13:3106.
Iijima, Y., Kakimoto, K., Kimura, M., Takeda, K., and Saitoh, T., 2000a, Real to real continuous formation of Y-123 coated concuctors by IBAD and PLD method, Appl. Supercond. Conf., Virginia Beach, VA, September 17–22.
Iijima, Y., Kakimoto, K., Kimura, M., Takeda, K., and Saitoh, T., 2000b, Reel-to-reel continuous formation of Y-123 coated conductors by IBAD and PLD method, presented at Applied Superconductivity Conference, Virginia Beach, VA, Sept. 17–22.
Iijima, Y., Kimura, M., Saitoh, T., and Takeda, K., 2000c, Development of Y-123-coated conductors by IBAD process, Physica C, 335:15.
Iijima, Y., Kakimoto, K., and Takeda, K., 2001a, Ion-beam-assisted growth of fluorite type oxide template films for biaxially textured HTSC coated conductors, IEEE Trans. Appl. Supercond., 11:3451.
Iijima, Y., Kakimoto, K., Kimura, M., Takeda, K., and Saitoh, T., 2001b, Reel to reel continuous formation of Y-123 coated conductors by IBAD and PLD method, IEEE Trans. Appl. Supercond., 11:2816.
Iijima, Y., Kakimoto, K., Takeda, K., and Saitoh, T., 2001c, Long length IBAD process of fluorite type oxides for Y-123 coated conductors, in: Proc. Int. Workshop on Superconductivity, Honolulu, HI, p. 47.
Ji, H. and Was, G.H., 1999, Linkage between crystallographic texture and surface roughness in niobium films synthesized by ion bean assisted deposition, Nucl. Inst. Meth. Phys. Res. B, 148:880.
Jia, Q.X. and Anderson, W.A., 1990, Critical current density enhancement in YBa2Cu3O7−δ films on buffered metallic substrates, Appl. Phys. Lett., 57:304.
Jia, Q.X., Arendt, P.N., Foltyn, S.R., Holesinger, T.G., and DePaula, R.F., 2001, Superconducting YBCO films on polycrystalline yttrium-iron-garnet using IBAD-YSZ as a template, IEEE Trans. Appl. Supercond., 11:3489.
Kao, A.S. and Gorman, G.L., 1990, Modification of zirconia film properties by low-energy ion bombardment during reactive ion-beam deposition, J. Appl. Phys., 67:3826.
Knierim, A., Auer, R., Geerk, J., Li, Y., Linker, G., Meyer, O., Reiner, J., Schweiss, P., and Smithey, R., 1997, Influence of the process parameters on the growth of YSZ layers prepared by ion-beam assisted deposition (IBAD), Nucl. Inst. Meth. Phys. Res. B, 127:832.
Kohno, O., Iijima, Y., Onabe, K., Tanabe, N., Sadakata, N., Saito, T., Yoshitomi, J., and Nagaya, S., 1995, YBCO tape conductor by thin film deposition process, in: Proc. Int. Workshop on Superconductivity, Maui, HI, p. 210.
Kumar, A., Ganapathi, L., Kanetkar, S.M., and Narayan, J., 1990, Synthesis of superconducting YBa2Cu3O7−δ thin films on nickel-based superalloy using in situ pulsed laser deposition, Appl. Phys. Lett., 57:2594.
Kung, H., Foltyn, S.R., Arendt, P.N., and Maley, M.P., 1999, Characterization of the structure of Y-Ba-Cu-O coated conductors, IEEE Trans. Appl. Supercond., 9:2034.
Kung, H., Foltyn, S.R., Arendt, P.N., Groves, J.R., Holesinger, T.G., Jia, Q.X., and Maley, M.P., 2001, Microstructural characterization of YBCO thick film coated conductors on IBAD-YSZ and MgO template layers, in: Proc. Int. Workshop on Superconductivity, Honolulu, HI, p. 241.
Lewis, B. and Jordan, M.R., 1970, Nucleation and epitaxy of gold deposits on sodium chloride substrates during electron bombardment, Thin Solid Films, 6:1.
Mao, Y.J., Jiang, B.Y., Ren, C.X., Liu, X.H., and Zou, S.C., 1998, Low energy ion beam assisted deposition of biaxially aligned yttria-stabilized zirconia films on polycrystalline Ni-Cr alloy, Nucl. Inst. and Meth. in Phys. Res. B, 135:492.
Mao, Y.J., Liu, X.H., Zhang, F., Ren, C.X., and Zou, S.C., 1998, Ion beam assisted deposition of biaxially textured cerium dioxide films on polycrystalline Ni-based alloy, Surf. Ctngs. Tech., 104:78.
Marinov, M., 1977, Effect of ion bombardment on the initial stages of thin film growth, Thin Solid Films, 46:267.
Marinov, M. and Dobrev, D., 1977, The change in the structure of vacuum condensed hexagonal closepacked metal films on ion bombardment, Thin Solid Films, 42:265.
Matijasevic, V.C., Lu, Z., Von Dessoneck, K., Taylor, C., and Bartlett, D., 1998, RHEED monitoring of rotating samples during large area homogeneous deposition of oxides, Mater. Res. Soc. Symp. Proc., 526:249.
Matsumoto, K., Kim, S.-B., Wen, J.-G., Hirabayashi, I., Watanbe, T., Uno, N., and Ikeda, M., 1999, Fabrication of in-plane aligned YBCO films on polycrystalline Ni tapes buffered with surface-oxidized NiO layers, IEEE Trans. Appl. Supercond., 9:1539.
Miura, S., Hashimoto, K., Wang, F., Enomoto, Y., and Morishita, T., 1997, Structural and electrical properties of liquid phase epitaxially grown YBa2Cu3Ox films, Physica C, 278:201.
Mu, H., Ren, C., Jiang, B., Yu, Y., Luo, E.Z., and Wilson, Z.H., 2000, Low energy ion beam assisted deposition of biaxially aligned YSZ and CeO2/YSZ films on r-plane sapphire, Surf. Ctngs. Tech., 124:61.
Narumi, E., Song, L.W., Yang, F., Patel, S., Kao, Y.H., and Shaw, D.T., 1991, Critical current density enhancement in YBa2Cu3O6.8 films on buffered metallic substrates, Appl. Phys. Lett., 58:1202.
Nelson, R.S. and Thompson, M.W., 1963, The penetration of energetic ions through the open channels in a crystal lattice, Phil. Mag., 8:1677.
Nies, R., Blanchard, S., Gromoll, B., Fischer, S., Kraemer, H.P., Schilling, W., Schmidt, W., Seebacher, R., Utz, B., Volkmar, R.R., v. Lochneysen, H., and Neumueller, H.W., 2000, Large area deposition of biaxially textured YSZ buffer layers and superconducting YBCO on polycrystalline substrates, in: Proc. Int. Workshop on Superconductivity, Matsue-shi, Japan, p. 269.
Ohmatsu, K., Muranaka, K., Taneda, T., Takei, H., Sato, K., Matsuo, K., and Takahashi, Y., 2000, Development of in-plane algned YBCO tapes fabricated by inclined substrate deposition, 13th International Symposium on Superconductivity, Tokyo, Japan, October 14–16.
Onabe, K., Nagaya, S., Shimonosono, T., Iijima, Y., Sadakata, N., and Saitoh, T., 1996, Fabrication of YBCO superconducting tape by continuous MOCVD technique, Adv. Supercond. IX, 8:671.
O’Neill, D., 2000, Progress towards lengths at 3M, Superconductivity Program for Electrical Systems, 2000 Annual Peer Review, Washington, DC, July 17–19.
Peterson, D., 1995, Superconductivity Program for Electrical Systems, 1995 Annual Peer Review, Alexandria, VA, Aug. 1–2.
Piercy, G.R., Brown, F., Davies, J.A., and McCargo, M., 1963, Experimental evidence for the increase of heavy ion ranges by channeling in crystalline structure, Phys. Rev. Lett., 10:399.
Quinton, W.A.J., Liang, W.Y., Baudenbacher, F., Foord, D.T., Bramley, A.P., and Newcomb, S.B., 1999, The microstructure of YBa2Cu3O7−δ films and yttria-stabilized zirconia buffer layers deposited on inclined hastelloy substrates, IEEE Trans. Appl. Supercond., 9:1498.
Rauschenbach, B. and Gerlach, J.W., 2000, Texture development in titanium nitride films grown by lowenergy ion assisted deposition, Cryst. Res. Technol., 35:675.
Reade, R.P., Mao, X.L., and Russo, R.E., 1991, Characterization of Y-Ba-Cu-O thin films and yttriastabilized zirconia intermediate layers on metal alloys grown by pulsed laser deposition, Appl. Phys. Lett., 59:739.
Reade, R.P., Berdahl, P., Russo, R.E., and Garrison, S.M., 1992, Laser deposition of biaxially textured yttriastabilized zirconia buffer layers on polycrystalline metallic alloys for high critical current Y-Ba-Cu-O thin films, Appl. Phys. Lett., 61:2231.
Reade, R.P. and Russo, R.E., 1996, Ion-assisted pulsed-laser deposition for the fabrication of Y-Ba-Cu-O multilayer structures using oriented intermediate layers of YSZ and CeO2, Appl. Surf. Sci., 96:726.
Ressler, K.G., Sonnenberg, N., and Cima, M.J., 1997, Mechanism of biaxial alignment of oxide thin films during ion-beam-assisted deposition, J. Amer. Ceram. Soc., 80:2637.
Riley, G.N., Li, Q., and Fritzmeier, L.G., 1999, High temperature superconducting composite wires, Current Opinion in Solid State & Mat. Sci., 4:473.
Robinson, M.T. and Oen, O.S., 1963, The channeling of energetic atoms in crystal lattices, Appl. Phys. Lett., 2:30.
Rupich, M., 2000, Current and future status of HTS conductor manufacturing at ASC, Superconductivity Program for Electrical Systems, 2000 Annual Peer Review, Washington, DC, July 17–19.
Rupich, M.W., Palm, W., Zhang, W., Siegal, E., Annavarapu, S., Fritzmeier, L., Teplitsky, M.D., Thieme, C., and Paranthaman, M., 1999, Growth and characterization of oxide buffer layers for YBCO coated conductors, IEEE Trans. Appl. Supercond., 9:1527.
Russo, R.E., Reade, R.P., McMillian, J.M., and Olsen, B.L., 1990, Metal buffer layers and Y-Ba-Cu-O thin films on Pt and stainless steel using pulsed laser deposition, J. Appl. Phys., 68:1354.
Saavides, N., Thorley, A., Gnanarajan, S., Herrmann, J., Katsaros, A., and Molodyk, A., 2001, YBCO coated tapes fabricated by IBAD and magnetron sputtering techniques, Physica C, 341:2491.
Selvamanickam, V., 2000, YBCO coated conductor fabrication byMOCVD, Superconductivity Program for Electrical Systems, 2000 Annual Peer Review, Washington, DC, July 17–19.
Selvamanickam, V., Carota, G., Funk, M., Vo, N., Haldar, P., Baluchandran, U., Chudzik, M., Arendt, P., Groves, J.R., DePaula, R., and Newnam, B., 2001, High current Y-Ba-Cu-O coated conductor using metal organic chemical vapor deposition and ion-beam assisted deposition, IEEE Trans. Appl. Supercond., 11:3379.
Shiohara, Y., 2000, Recent progress of coated conductors in Japan, Fall MRS Meeting, Boston, MA, Nov. 27–Dec. 1.
Sickafus, K.E., Minivini, L., Grimes, G.W., Valdez, J.A., Ishimaru, M., McClellan, K.J., and Hartmann, T., 2000, Science, 239:748.
Sonnenberg, N., Longo, A.S., Cima, M.J., Chang, B.P., Ressler, K.G., McIntyre, P.C., and Liu, Y.P., 1993, Preparation of biaxially aligned cubic zirconia films on pyrex glass substrates using ion-beam assisted deposition, J. Appl. Phys., 74:1027.
Storer, J., 2000, IBAD substrate development at 3M, Superconductivity Program for Electrical Systems, 2000 Annual Peer Review, Washington, DC, July 17–19.
Tiwari, P., Kanetkar, S.M., Sharan, S., and Narayan, J., 1990, In situ single chamber laser processing of YBa2Cu3O7−δ superconducting thin-films on Si(100) with yttria-stabilized zirconia buffer layers, Appl. Phys. Lett., 57:1578.
Trillat, J.J., Terao, N., Tertain, L., and Gervais, H., 1956, Application de la methode de decapage ionique en diffraction electronique, J. Phys. Soc. Jpn., 4:406.
van Wyk, G.N., 1980, The dependence of ion bombardment induced preferential orientation on the direction of the ion beam, Rad. Eff. Lett., 57:45.
van Wyk, G.N. and Smith, H.J., 1978, Ion bombardment induced preferential orientation in polycrystalline Cu targets, Rad. Eff., 38:245.
Wang, C.P., 1999, Ion-beam-induced texturing in oxide thin films and its applications, Ph.D. thesis, Stanford University.
Wang, C.P., Do, K.B., Beasley, M.R., Geballe, T.H., and Hammond, R.H., 1997, Deposition of in-plane textured MgO on amorphous Si3N4 substrates by ion-beam-assisted deposition and comparisons with ion-beam-assisted deposited yttria-stabilized-zirconia, Appl. Phys. Lett., 71:2955.
Weismann, J., Dzick, J., Hoffmann, J., Heinemann, K., and Freyhardt, H.C., 1998, Growth mechanism of biaxially textured YSZ films deposited by ion-beam-assisted deposition, J. Mater. Res., 13:3149.
Witanachchi, S., Patel, S., Zhu, Y.Z., Kwok, H.S., and Shaw, D.T., 1990, Flexible stainless steel foil as a substrate for superconducting Y-Ba-Cu-O films, J. Mater. Res., 5:717.
Wu, X.D., Foltyn, S.R., Arendt, P., Townsend, J., Adams, C., Campbell, I.H., Tiwari, P., Coulter, Y., and Peterson, D.E., 1994, High current YBa2Cu3O7−δ thick films on flexible nickel substraes with textured buffer layers, Appl. Phys. Lett., 65:1961.
Wu, X.D., Foltyn, S.R., Arendt, P.N., Blumenthal, W.R., Campbell, I.H., Cotton, J.D., Coulter, J.Y., Maley, M.P., Safar, H.F., and Smith, J.L., 1995, Properties of YBa2Cu3O7−δ thick films on flexible buffered metallic substrates, Appl. Phys. Lett., 67:2397.
Xiong, X. and Winkler, D., 2000, Rapid deposition of biaxially-textured CeO2 buffer layers on polycrystalline nickel alloy for superconducting tapes by ion assisted pulsed laser deposition, Physica C, 336:70.
Yang, F., Narumi, E., Patel, S., and Shaw, D.T., 1995, In-plane texturing and its effects on critical current densities of YBa2Cu3O7−x thin films grown on polycrystalline substrates, Physica C, 244:299.
Yu, L.S., Harper, J.M.E., Cuomo, J.J., and Smith, D.A., 1985, Alignment of thin films by glancing angle ion bombardment during deposition, Appl. Phys. Lett., 47:932.
Yu, L.S., Harper, J.M.E., Cuomo, J.J., and Smith, D.A., 1986, Control of thin film orientation by glancing angle ion bombardment during growth, J. Vac. Sci. Tech. A, 4:443.
Zhu, S., Lowndes, D.H., Budai, J.D., and Norton, D.P., 1994, In-plane aligned CeO2 films grown on amorphous SiO2 substrates by ion-beam assisted pulsed laser deposition, Appl. Phys. Lett., 65:2012.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2005 Kluwer Academic Publishers
About this chapter
Cite this chapter
Arendt, P.N. (2005). IBAD Template Films for HTS Coated Conductors. In: Goyal, A. (eds) Second-Generation HTS Conductors. Springer, Boston, MA. https://doi.org/10.1007/0-387-25839-6_1
Download citation
DOI: https://doi.org/10.1007/0-387-25839-6_1
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4020-8117-0
Online ISBN: 978-0-387-25839-3
eBook Packages: EngineeringEngineering (R0)