Summary
In this chapter, we described multiport interconnect modeling using PRIMA. Reduced order models of multiport circuits can be obtained via projections onto Krylov subspaces. Krylov vectors, bases for Krylov subspaces, contain the same information with moments, but numerically better conditioned. Thus their use allow us to obtain very high order accurate reduced order models. In addition, PRIMA exploits the properties of RLC circuit formulation to generate guaranteed stable and passive models. In the next chapter, we explain how to combine these frequency-domain macromodels with nonlinear drivers and receivers in a SPICE-like simulation environment.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
V. Raghavan, E. Bracken, and R. A. Rohrer, “AWESpice: A general tool for the accurate and efficient simulation of interconnect problems,” in Proc. Design Automation Conference, June 1992.
S.-Y. Kim, N. Gopal, and L. T. Pillage, “Time-domain macromodels for VLSI interconnect analysis,” IEEE Trans. on Computer-Aided Design, vol 13,no. 10, pp. 1257–1270, Oct. 1994.
R. Acar, M. Nakhla, P. Gunupudi, and E. Chiprout, “Passive interconnect reduction algorithm for distributed/measured networks,” IEEE Trans. on Circuits and Systems — II, vol. 17,no. 4, pp. 287–301, Apr. 2000.
G. Strang, Introduction to Linear Algebra, Second Edition. Wellesley-Cambridge Press, June 1998.
G. H. Golub and C. F. Van Loan, Matrix Computations, Third Edition. Baltimore: The Johns Hopkins University Press, 1996.
C.-T. Chen, Linear System Theory and Design, Third Edition. New York: Oxford University Press, 1999.
Y. Saad, Iterative Methods For Sparse Linear Systems. Boston, MA: PWS Pub. Co., 1996.
C. D. Villemagne and R. E. Skelton, “Model reductions using a projection formulation,” Int. J. Control, vol. 46,no. 6, pp. 2141–2169, 1987.
H. M. Kim and R. R. Craig Jr., “Structural dynamics analysis using an unsymmetric block Lanczos algorithm,” Int. Journal for Numerical Methods In Engineering, vol. 26, pp. 2305–18, 1988.
E. J. Grimme, “Krylov projection methods for model reduction,” Ph.D. dissertation, Univ. of Illinois, Urbana-Champaign, 1997.
W. E. Arnoldi, “The principle of minimized iteration in the solution of the matrix eigenvalue problem,” Quart. Appl. Math., vol. 9, pp. 17–29, 1951.
C. Lanczos, “An iteration method for the solution of the eigenvalue problem of linear differential and integral operators,” J. Res. Nat. Bur. Standards, vol. 45. pp. 255–282,1950.
D. L. Boley, “Krylov space methods on state-space control models,” Circuits Syst. Signal Process. vol. 13,no. 6, pp. 733–758, 1994.
J. I. Aliaga, D. L. Boley, R. W. Feund, and V. Hernandez, “A Lanczos-type method for multiple starting vectors,” Mathematics of Computation, vol. 69, pp. 1577–1601, 2000.
P. Feldmann and R. W. Freund, “Reduced-order modeling of large linear subcircuits via a block Lanczos algorithm,” in Proc. 32nd IEEE/ACM Design Automation Conf., pp. 474–479, Jun. 1995.
R. W. Freund and P. Feldmann, “Reduced-order modeling of large linear passive multi-terminal circuits using matrix-Padé approximation,” in Proc. Design Automation and Test in Europe Conf., pp. 530–537, Feb. 1998.
B. D. O. Anderson and S. Vongpanitlerd, Network Analysis and Synthesis. Enlewood Cliffs, NJ: Prentice-Hall Inc., 1973.
R. A. Rohrer and H. Nosrati, “Passivity considerations in stability studies of numerical integration algorithms,” IEEE Trans. on Circuits and Systems, vol. CAS-28,no. 9, pp. 857–866, Sep. 1981.
A. Odabasioglu, M. Celik, and L. Pileggi, “PRIMA: Passive reduced-order interconnect macromodeling algorithm,” in Tech. Dig. 1997 IEEE/ACM Int. Conf. on Computer-Aided Design, Nov. 1997.
A. Odabasioglu, M. Celik, and L. Pileggi, “PRIMA: Passive reduced-order interconnect macromodeling algorithm,” IEEE Trans. on Computer-Aided Design of CAS, vol. 18,no. 8, pp. 645–654, Aug. 1998.
A. Odabasioglu, M. Celik, and L. Pileggi, “Practical considerations for passive reduction of RLC circuits,” in Proc. 36th IEEE/ACM Design Automation Conf., pp. 214–219, Jun. 1999.
K. J. Kerns and A. T. Yang, “Preservation of passivity during RLC network reduction via split congruence transformations,” in Proc. 34th IEEE/ACM Design Automation Conf., pp. 34–39, Jun. 1997.
K. J. Kerns and A. T. Yang, “Preservation of passivity during RLC network reduction via split congruence transformations,” IEEE Trans. on Computer-Aided Design of CAS, vol. 17,no. 7, pp. 582–591, Jul. 1998.
I. M. Elfadel and D. D. Ling, “A block rational Arnoldi algorithm for multipoint passive model-order reduction of multiport RLC networks,” in Tech. Dig. 1997 IEEE/ACM Int. Conf. on Computer-Aided Design, pp. 66–71, Nov. 1997.
R. W. Freund, “Passive reduced-order models for interconnect simulation and their computation via Krylov-subspace algorithms,” in Proc. 36th IEEE/ACM Design Automation Conf., Jun. 1999.
A. C. Cangellaris, S. Pasha, J. L. Prince, and M. Celik, “A new discrete transmission line model for passive model order reduction and macromodeling of high-speed interconnections,” IEEE Trans. on Advanced Packaging, vol. 22, pp. 356–364, Aug. 1999.
M. Kamon, N. A. Marques, L. M. Silveira, and J. White, “Automatic generation of accurate circuit models of 3-D interconnect,” IEEE Trans. on Components, Packaging, and Manufacturing Tech. — Part B, vol. 21, pp. 225–240, Aug. 1998.
A. E. Ruehli and A. C. Cangellaris, “Progress in the methodologies for the electrical modeling of interconnects and electronic packages,” Proc. IEEE, vol. 89,no. 5, pp. 740–771, May 2001.
A. C. Cangellaris and M. Celik, “Order reduction of high-speed interconnect electrical models: the issue of passivity,” in Proc. IC/Package Design Integration, pp. 132–137,1998.
S. Pasha, M. Celik, A. C. Cangellaris, and J. L. Prince, “Passive SPICE-compatible models of dispersive interconnects,” in Proc. 49th Electronic Components and Technology Conference, pp. 493–499, 1999.
A. E. Ruehli, “Equivalent circuit models for three-dimensional multiconductor systems,” IEEE Trans. Microwave Theory Tech., vol. MTT-22, Mar. 1974.
R. W. Newcomb, Linear Multiport Synthesis. New York: McGraw-Hill, 1966.
A. Ruhe, “The rational Krylov algorithm for nonsymmetric eigenvalue problems III: complex shifts for real matrices,” BIT, vol. 34, pp. 165–176,1994.
Q. Yu, J. M. L. Wang, E. S. Kuh, “Passive multipoint moment matching model order reduction algorithm on multiport distributed interconnect networks,” IEEE Transactions on Circuits and Systems — I: Fund. Theory and Appl. vol. 46,no. 1, pp. 140–160, Jan. 1999.
A. Odabasioglu, “Passive reduced-order interconnect macromodeling algorithm,” Ph. D. Thesis, Carnegie Mellon Univ., 1999.
Y. Saad, “Krylov subspace methods for solving large unsymmetric linear systems,” Math. Comp., vol. 37, pp. 105–126, 1981.
H. Levy, W. Scott, D. MacMillen, and J. White, “A rank-one update method for efficient processing of interconnect parasitics in timing analysis,” in Proc. 37th IEEE/ACM Design Automation Conf, Jun. 2000.
P. Feldmann and R. W. Freund, “Efficient linear circuit analysis by Padé approximations via the Lanczos process,” IEEE Trans. on Computer-Aided Design of CAS, vol. 14,no. 5, pp. 639–649, May 1995.
L. M. Silveira, M. Kamon, and J. White, “Efficient reduced-order modeling of frequency-dependent coupling inductances associated with 3-D interconnect structures,” in Proc. 32nd IEEE/ACM Design Automation Conf, pp. 376–380, San Francisco, Jun. 1995.
M. Celik and A. C. Cangellaris, “Simulation of multiconductor transmission lines using Krylov subspace order-reduction techniques,” IEEE Trans. on Computer-Aided Design, vol. 16,no. 5, May 1997.
J. E. Bracken, D.-K. Sun, Z. J. Cendes, “S-domain methods for simultaneous time and frequency characterization of electromagnetic devices,” IEEE Trans. on Microwave Theory and Techniques, vol. 46,no. 9, pp. 1277–1290, Sep. 1998.
J. Cullum, A. Ruehli, and T. Zhang, “A method for reduced-order modeling and simulation of large interconnect circuits and its application to PEEC models with retardation,” IEEE Trans. on Circuits and Systems — II, vol. 47, Apr. 2000.
K. Gallivan, E. Grimme, and P. Van Dooren, “Asymptotic waveform evaluation via Lanczos method,” Appl. Mat. Lett., vol. 7,no. 5, pp. 75–80, 1994.
L. M. Silveira, M. Kamon, I. M. Elfadel, and J. White, “Coordinate-transformed Arnoldi for generating guaranteed stable reduced-order models for RLC circuits” in Tech. Dig. 1996 IEEE/ACM Int. Conf. on Computer-Aided Design, pp. 288–294, Nov. 1996.
Z. Bai, R. D. Slone, W. T. Smith, and Q. Ye, “Error bound for reduced system model by Padé approximation via the Lanczos process,” IEEE Transactions on Computer-Aided Design of CAS, vol. 18,no. 2, Feb. 1999.
Rights and permissions
Copyright information
© 2002 Kluwer Academic Publishers
About this chapter
Cite this chapter
(2002). Passive Reduced-Order Multiport Models. In: IC Interconnect Analysis. Springer, Boston, MA. https://doi.org/10.1007/0-306-47971-0_6
Download citation
DOI: https://doi.org/10.1007/0-306-47971-0_6
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4020-7075-4
Online ISBN: 978-0-306-47971-7
eBook Packages: Springer Book Archive