Advertisement

Fundamentals of Polymeric Composite Materials

  • Claudio Migliaresi
  • Alessandro Pegoretti
Chapter

Keywords

Carbon Fiber Fiber Volume Fraction Interfacial Shear Stress Interfacial Shear Strength Polymeric Composite Material 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. Agarwal, B.G., Broutman, L.J. 1990. Analysis and Performance of Fiber Composites, 2nd edn., John Wiley & Sons, New York.Google Scholar
  2. Ahmed, S., Jones, F.R. 1990. A review of particulate reinforcement theories for polymer composites, J. Mat. Sci. 25, 4933–4942.CrossRefGoogle Scholar
  3. Bader, M.G., Lekakou, C. 1997. Processing for laminate structures, in: Composites Engineering Handbook (P.K. Mallick, ed.), pp. 371–479, Marcel Dekker Inc., New York.Google Scholar
  4. Barbero, E.J. 1998. Introduction to Composite Materials Design, Taylor and Francis Inc., Philadelphia, PA.Google Scholar
  5. Béland, S. 1990. High Performance Thermoplastic Resins and Their Composites, Noyes Data Corporation, Park Ridge, NJ.Google Scholar
  6. Berglund, L.A., 1998. Thermoplastic resins, in: Handbook of Composites, 2nd edn. (S.T. Peters, ed.), pp. 115–130, Chapman & Hall, London.Google Scholar
  7. Birchall, J.D., Brandbury, J.A.A., Dinwoodie, J. 1985. Alumina fibers: Preparation, properties and applications, in: Strong Fibres (W. Watt, B.V. Perov, eds.), pp. 115–154, Elsevier, Amsterdam.Google Scholar
  8. Broutman, L.J. 1969. Measurement of the fiber-polymer matrix interfacial strength, in: Interfaces in Composites, ASTM STP 452, pp. 27–41, American Society for Testing and Materials.Google Scholar
  9. Carlsson, L.A., Pipes, R.B. 1997. Experimental characterization of advanced composite materials, 2nd edn., Technomic Publishing Co., Lancaster, PA.Google Scholar
  10. Cassis, F.A., Talbot, R.C. 1998. Polyester and inyl ester resins, in: Handbook of Composites, 2nd edn. (S.T. Peters, ed.), pp. 34–47, Chapman & Hall, London.Google Scholar
  11. Castro, J.M., Griffith, R.M. 1997. Press molding processes, in: Composites Engineering Handbook (P.K. Mallick, ed.), pp. 481–513, Marcel Dekker Inc., New York.Google Scholar
  12. Chamis, C.C. 1969. Failure criteria for filamentary composites, in Composite Materials: Testing and Design, pp. 336–351, ASTM STP 460, American Society for Testing and Materials.Google Scholar
  13. Chamis, C.C., Sendeckyj, G.P. 1968. Critique on theories predicting thermoelastic properties of fibrous composites, J. Compos. Mater. 2, 332–358.Google Scholar
  14. Clements, L.L. 1998. Organic fibers, in: Handbook of Composites, 2nd edn. (S.T. Peters, ed.), pp. 202–241, Chapman & Hall, London.Google Scholar
  15. Cox, H.L. 1952. The elasticity and strength of paper and other fibrous materials, Br. J. Appl. Phys. 3, 72–79.CrossRefGoogle Scholar
  16. Dillon, G., Mallon, P., Monaghan, M. 1997. The autoclave processing of composites, in: Advanced Composite Manufacturing (T.G. Gutowski, ed.), pp. 207–258, John Wiley & Sons, New York.Google Scholar
  17. Dobb, M.G. 1985. The production, properties and structure of high-performance poly(p-phenylene terephthalamide) fibres, in: Strong Fibres (W. Watt, B.V. Perov, eds.), pp. 673–704, Elsevier, Amsterdam.Google Scholar
  18. Dockum, J.F. Jr. 1987. Fiberglass, in: Handbook of Reinforcements for Plastics (J.V. Milewski. H.S. Katz, eds.), pp. 233–286, Van Nostrand Reinhold Company, New York.Google Scholar
  19. Donnet, J.B., Bansal, R.C. 1990. Carbon Fibers, 2nd edn., Elsevier/Marcel Dekker Inc., New York.Google Scholar
  20. Fanucci, J.P., Nolet, S., McCarthy, S. 1997. Pultrusion of composites, in: Advanced Composite Manufacturing (T.G. Gutowski, ed.), pp. 259–295, John Wiley & Sons, New York.Google Scholar
  21. Fong, L., Advani, S.G. 1998. Resin transfer molding, in: Handbook of Composites, 2nd edn. (S.T. Peters, ed.), pp. 433–455, Chapman & Hall, London.Google Scholar
  22. Fraser, A.A., Ancker, F.H., DiBenedetto, A.T. 1975. A computer modelled single filament technique for measuring coupling and sizing agent effects in fibre reinforced composites, in: Proceedings of the 30th Annual Tech. Conf. on Reinforced Plastics, paper 22-A pp. 1–13, The Society of the Plastics Industry Inc., Washington D.C.Google Scholar
  23. Gibbs, H.H. 1998. High temperature resins, in: Handbook of Composites, 2nd edn. (S.T. Peters, ed.), pp. 75–98, Chapman & Hall, London.Google Scholar
  24. Gibson, R.F. 1994. Principles of Composite Material Mechanics, McGraw-Hill Inc., New York.Google Scholar
  25. Gutowski, T.G. 1997. A brief introduction to composite materials and manufacturing processes, in: Advanced Composite Manufacturing (T.G. Gutowski, ed.), pp. 5–41, John Wiley & Sons, New York.Google Scholar
  26. Halpin, J.C., Kardos, J.L. 1976. The Halpin-Tsai equations: a review, Polym. Eng. Sci. 16, 344–352.Google Scholar
  27. Halpin, J.C., Tsai,.W. 1969. ffects of environmental factors on composite materials, AFML-TR-63-423.Google Scholar
  28. Haque, E., Leach B.L. 1998. Matched metal compression molding of polymer composites, in: Handbook of Composites, 2nd edn. (S.T. Peters, ed.), pp. 378–396, Chapman & Hall, London.Google Scholar
  29. Hashin, Z. 1980. Failure criteria for unidirectional fiber composites, J. Appl. Mech. 47, 329–334.Google Scholar
  30. Herakovich, C.T. 1998. Mechanics of Fibrous Composites, John Wiley & Sons, New York.Google Scholar
  31. Herrera-Franco, P.J., Drzal, L.T. 1992. Comparison of methods for the measurements of fibre/matrix adhesion in composites, Composites 23, 2–27.CrossRefGoogle Scholar
  32. Hill, R. 1965. Theory of mechanical properties of fibre-strengthened materials: III. Self-consistent model, J. Mech. Phys. Solids 13, 189.Google Scholar
  33. Hughes, J.D.H. 1991. The carbon fiber-epoxy interfaces-a review, Compos. Sci. Technol. 41, 13–45.CrossRefGoogle Scholar
  34. Jaffe, M. 1987. High modulus polymers, in: Encyclopedia of Polymer Science and Engineering, Vol. 7, pp. 699–722, Wile y-Interscience, New York.Google Scholar
  35. Juska, T.D., Puckett, P.M. 1997. Matrix resins and fiber/matrix adhesion, in: Composites Engineering Handbook (P.K. Mallick, ed.), pp. 101–165, Marcel Dekker Inc., New York.Google Scholar
  36. Kelly, A., Tyson, W.R. 1965. Tensile properties of fiber-reinforced metals: copper/tungsten and copper/molybdenum, J. Mech. Phys. Solids 13, 329–350.Google Scholar
  37. Kim, J.K., Mai, Y.W. 1998. Engineered Interfaces in Fiber Reinforced Composites, Elsevier Science Ltd., Amsterdam.Google Scholar
  38. Kumar, S., Wang, Y. 1997. Fibers, fabric, and fillers, in: Composites Engineering Handbook (P.K. Mallick, ed.), pp. 51–100, Marcel Dekker Inc., New York.Google Scholar
  39. Lafdi, K., Wright, M.A. 1998. Carbon fibers, in: Handbook of Composites, 2nd edn. (S.T. Peters, ed.), pp. 169–201, Chapman & Hall, London.Google Scholar
  40. Launikitis, M.B. 1982. Vinyl ester resins, in: Handbook of Composites (G. Lubin, ed.), pp. 38–49, Van Nostrand Reinhold Company Inc., New York.Google Scholar
  41. Loevenstein, K.L. 1983. The Manufacturing Technology of Continuous Glass Fibers, 2nd edn., Elsevier, New York.Google Scholar
  42. Mahdukar, M.S., Drzal, L.T. 1991a. Fiber-matrix adhesion and its effect on composite mechanical properties: I. Inplane and interlaminar shear behavior of graphite/epoxy composites, J Compos. Mater. 25, 932–957.Google Scholar
  43. Mahdukar, M.S., Drzal, L.T. 1991b. Fiber-matrix adhesion and its effect on composite mechanical properties: II. Longitudinal (0°)transverse (90°)tensile and flexure behavior of graphite/epoxy composites, J. Compos. Mater. 25, 958–991.Google Scholar
  44. Mahdukar, M.S., Drzal, L.T. 1992a. Fiber-matrix adhesion and its effect on composite mechanical properties: III. Longitudinal (0°)compressive properties of graphite/epoxy composites, J. Compos. Mater. 26, 310–333.Google Scholar
  45. Mahdukar, M.S., Drzal, L.T. 1992b. Fiber-matrix adhesion and its effect on composite mechanical properties: IV. Mode I and mode II fracture toughness of graphite/epoxy composites, J. Compos. Mater. 26, 936–969.Google Scholar
  46. Mallick, P.K. 1993. Fiber Reinforced Composites, Marcel Dekker Inc., New York.Google Scholar
  47. Mandell, J.F., Chen, J.H., McGarry, F.J. 1980. A microdebonding test for in situ fiber/matrix bond strength in composite materials, Int. J. Adhes. Adhesiv. 1, 40–44.Google Scholar
  48. Miller, B., Muri, P., Rebenfeld, L. 1987. A microbond method for determination of the shear strength of a fiber/resin interface, Compos. Sci. Technol. 28, 17–32.CrossRefGoogle Scholar
  49. Muzzy, J.D., Colton, J.S. 1998. The processing science of thermoplastic composites, in: Advanced Composite Manufacturing (T.G. Gutowski, ed.), pp. 81–114, John Wiley & Sons, New York.Google Scholar
  50. Nicolais, L., Narkis, M. 1971. Stress-strain behavior of styrene-acrylonitrile/glass bead composites in the glassy region, Polym. Eng. Sci. 11, 194–199.CrossRefGoogle Scholar
  51. Nielsen, L.E. 1967. Mechanical properties of particulate-filled systems, J. Compos. Mater. 1, 100–119.Google Scholar
  52. Okine, R.K. 1997. Processing of thermoplastic matrix composites, in: Composites Engineering Handbook (P.K. Mallick, ed.), pp. 579–629, Marcel Dekker Inc., New York.Google Scholar
  53. Peebles, L.H. 1995. Carbon Fibers: Formation, Structure, and Properties, CRC Press, Boca Raton.Google Scholar
  54. Penn, L.S., Chiao, T.T. 1982. Epoxy resins, in: Handbook of Composites (G. Lubin, ed.), pp. 57–88, Van Nostrand Reinhold Company Inc., New York.Google Scholar
  55. Penn, L.S., Wang, H. 1998. Epoxy resins, in: Handbook of Composites, 2nd edn. (S.T. Peters, ed.), pp. 48–74, Chapman & Hall, London.Google Scholar
  56. Peters, S.T., Tarnopol’skii, M. 1997. Filament winding, in: Composites Engineering Handbook (P.K. Mallick, ed.), pp. 515–548, Marcel Dekker Inc., New York.Google Scholar
  57. Plueddemann, E.P. 1991. Silane Coupling Agents, 2nd edn., Plenum Press, New York.Google Scholar
  58. Richardson, T. 1987. Composites: A Design Guide, Industrial Press Inc., New York.Google Scholar
  59. Shimp, D.A. 1998. Speciality matrix resins, in: Handbook of Composites, 2nd edn. (S.T. Peters, ed.), pp. 99–114, Chapman &Hall, London.Google Scholar
  60. Sidwell, D.R. 1998. Hand lay-up and bag molding, in: Handbook of Composites, 2nd edn. (S.T. Peters, ed.), pp. 352–377, Chapman &Hall, London.Google Scholar
  61. Sumerak, J.E. 1997. The poltrusion process for continuous automated manufacture of engineered composite profiles, in: Composites Engineering Handbook (P.K. Mallick, ed.), pp. 549–577, Marcel Dekker Inc., New York.Google Scholar
  62. Suplinskas, R.J., Marzik, J.V. 1987. Boron and silicon carbide filaments, in: Handbook of Reinforcements for Plastics (J.V. Milewski, H.S. Katz, eds.), pp. 340–363, Van Nostrand Reinhold Company, New York.Google Scholar
  63. Tarnopol’ skii, Y.M., Peters, S.T., Beil’, A.I. 1998. Filament winding,in:Handbook of Composites, 2nd edn. (S.T. Peters, ed.), pp. 456–475, Chapman &Hall, London.Google Scholar
  64. Throne, J.L. 1998. Processing thermoplastic composites, in: Handbook of Composites, 2nd edn. (S.T. Peters, ed.), pp. 525–555, Chapman &Hall, London.Google Scholar
  65. Tsai, S.W., Pagano, N.J. 1968. Invariant properties of composite materials, in Composite Materials Workshop (S.W. Tsai, J.C. Halpin, N.J. Pagano, eds.), pp. 233–252, Technomic Publishing Co. Lancaster, PA.Google Scholar
  66. Tsirlin, J. 1985. Boron filaments, in: Strong Fibres (W. Watt, B.V. Perov, eds.), pp. 155–199, Elsevier, Amsterdam.Google Scholar
  67. Updegraff, I.H. 1982. Unsatured polyester resins, in: Handbook of Composites (G. Lubin, ed.), pp. 17–37, Van Nostrand Reinhold Company Inc., New York.Google Scholar
  68. Vaughan, D.J. 1998. Fiberglass reinforcement, in: Handbook of Composites, 2nd edn. (S.T. Peters, ed.), pp. 131–155, Chapman &Hall, London.Google Scholar
  69. Wilson, B.A. 1998. Pultrusion, in: Handbook of Composites, 2nd edn. (S.T. Peters, ed.), pp. 488–524, Chapman &Hall, London.Google Scholar
  70. Yajima, S. 1985. Silicon carbide fibres, in: Strong Fibres (W. Watt, B.V. Perov, eds.), pp. 201–237, Elsevier, Amsterdam.Google Scholar

Copyright information

© Kluwer Academic Publishers 2002

Authors and Affiliations

  • Claudio Migliaresi
    • 1
  • Alessandro Pegoretti
    • 1
  1. 1.Department of Materials EngineeringUniversity of TrentoTrentoItaly

Personalised recommendations