Abstract
Moiré interferometry with a low density grating was used to evaluate the suitability of the T* ε integral and CTOA as ductile fracture parameters for characterizing low cycle fatigue and dynamic crack growth in thin aluminum fracture specimens. Phase shifting Moiré interferometry with a high density grating was also used to determine the energy dissipation mechanism in brittle alumina ceramics.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Smith. Charles W.: Measurements of three-dimensional effects in cracked body problems, in Jonathan S. Epstein (ed.), Experimental Techniques in Fracture, VCH Publishers, 1993, 253–289.
Liechti, Kenneth M.: On the use of classical interferometry techniques in fracture mechanics, ibid. loc. cit., 95–124.
Rosakis, Ares J.: Two optical techniques sensitive to gradients of optical path difference: the method of caustics and the coherent gradient sensor (CGS), ibid. loc. cit., 327–426.
Kalthoff, Joerg F.: Shadow optical method of caustics, in Albert S. Kobayashi (ed.), Handbook on Experimental Mechanics, VCH Publishers, 1993, 407–476.
Kobayashi, A. S., Harris, D. O. and Engstrom, W. L.: Transient analysis in a fracturing magnesium plate, Experimental Mechanics, 7, 10 (1967), 434–440.
Kobayashi, A. S. and Engstrom, W. L.: Transient analysis in fracturing aluminum plates, Proc. 1967 JSME Semi-International Symposium, 1997, 172–181.
Chiang, Fu-pen,: Moire and speckle method applied to elastic-plastic fracture mechanics, in Jonathan S. Epstein (ed.), Experimental Techniques in Fracture, VCH Publishers, 1993, 291–325.
Post, D.: Optical interference for deformation measurements-Classical holography and Moiré interferometry, in W.W. Stinchcomb (ed.), Mechanics of Nondestructive Testing, Plenum Press, 1980, 1–53.
Epstein, J.S. and Dadkhah, M.S.: Moiré interferometry in fracture research, in Jonathan S. Epstein (ed.), Experimental Techniques in Fracture, VCH Publishers, 1993, 427–140.
Post, D.: Moiré interferometry, in Albert S. Kobayashi (ed.), Handbook on Experimental Mechanics, VCH Publishers, 1993, 297–364.
Wang. F.X., May, G.G. and Kobayashi, A.S.: Low-spatial-frequency steep grating for use in Moiré interferometry, Optical Engineering, 33, 4 (1994), 1125–1131.
Brust, F.W., Nishioka, T., Atluri, S.N. and Nakagaki, M.: Further studies on elastic-plastic stable fracture utilizing the T*-integral, Engineering Fracture Mechanics, 22 (1985), 1079–1103..
Okada, H. and Atluri, S.N.: Further Study on the Near Tip Integral Parameter T* ε in Stable Crack Propagation in Thin Ductile Plate, Proceedings of Aerospace Division, ASME, AD-Vol. 52, J.C.I. Chang et. al. (eds.), 1997, 251–260.
Pyro, C.R., Okada, H. and Atluri, S.N.: An Elastic-Plastic Finite Element Alternating Method for Analyzing Wide Spread Fatigue Damage in Aircraft Structures, Computational Mechanics, 16 (1995), 62–68.
Narashimhan, R. and Rosakis, A.J.: Three-dimensional effects near a crack tip in a ductile three-point bend specimen: Part 1-A numerical investigation, ASME Journal of applied Mechanics, 57 (1990), 607–617.
Dawicke, D.S., Newman, J.C. Jr., Sutton, M.A. and Amstutz, B.E.: Stable tearing behavior of a thin sheet material with multiple cracks, Fracture Mechanics: 26th Volume, ASTM STP 1256, W.G. Reuter, J.H. Underwood and J.C. Newman, Jr. (eds.), ASTM, 1995.
Dawicke, D.S., Plascik, R.S. and Newman, J.C. Jr.: Prediction of stable tearing and fracture of a 2000-series aluminum alloy plate using a CTOA criterion, Fatigue and Fracture Mechanics; 27th Volume, ASTM STP 1296, R.S. Plascik, J.C. Newman, Jr. and N.E. Dowling (eds.), ASTM, 1997, 90–104.
Nikishkov, G.P. and Atluri, S.N.: An equivalent domain integral method for computing crack-tip integral parameters in non-elastic, thermo-mechanical fracture, Engineering Fracture Mechanics, 26 (1987), 851–867.
Lee, J., Kokaly, M.T. and Kobayashi, A.S.: Dynamic ductile fracture of aluminum SEN specimens: An experimental-numerical analysis, Advances in Fracture Research, ICF 9, B.L.I. Karihaloo, Y.W. Mai, M.I. Ripley and R.O. Richie (eds.), Pergamon Press, 1997, 2965–2972
Hay, J.C. and White, K.E.: Grain boundary phase and wake zone characterization in monolithic alumina, J. of Amer. Ceramic Soc., 78 (1995), 1025–1032.
Roedel, J., Kelly, J.F. and Lawn, B.R.: In situ measurements of bridged crack interfaces in scanning electron microscope, J. of Amer. Ceramic Soc., 73 (1990), 3313–3318.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2000 Kluwer Academic Publishers
About this paper
Cite this paper
Kobayashi, A.S. (2000). Moiré Interferometry Analysis of Fracture. In: Lagarde, A. (eds) IUTAM Symposium on Advanced Optical Methods and Applications in Solid Mechanics. Solid Mechanics and its Applications, vol 82. Springer, Dordrecht. https://doi.org/10.1007/0-306-46948-0_48
Download citation
DOI: https://doi.org/10.1007/0-306-46948-0_48
Publisher Name: Springer, Dordrecht
Print ISBN: 978-0-7923-6604-1
Online ISBN: 978-0-306-46948-0
eBook Packages: Springer Book Archive