Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
A. Roth, Vacuum Technology, North-Holland, New York (1983).
G. W. Rubloff, Photoemission studies of time-resolved surface reactions: Isothermal desorption of CO from Ni(111), Surf. Sci. 89, 566 (1979).
P. Pianetta, I. Lindau, C. M. Garner, and W. E. Spicer, The oxidation properties of GaAs(110) surfaces, Phys. Rev. Lett. 37, 1166 (1976).
P. Pianetta, I. Lindau, C. M. Gamer, and W. E. Spicer, Chemisorption and oxidation studies of the (110) surfaces of GaAs, GaSb and InP, Phys. Rev. B 18, 2792 (1978).
D. A. King and M. G. Wells, Molecular beam investigation of adsorption kinetics on bulk metal targets: Nitrogen on tungsten, Surf. Sci. 29, 454 (1972).
T. E. Madey, Adsorption of Oxygen on W(100): Adsorption Kinetics and Electron Stimulated Desorption, Surf. Sci. 33, 355 (1972).
J. Benziger and R. J. Madix, The Effects of carbon, oxygen, sulfur and potassium adlayers on CO and H2 adsorption on Fe(100). Surf. Sci. 94, 119 (1980).
C. T. Campbell and S. M. VaIone, Design considerations for simple gas dosers in surface science applications, J. Vac. Sci. Technol. A 3, 408 (1985).
D. C. Gray and H. H. Sawin, Design considerations for high-flux collisionally opaque molecular beams, J. Vac. Sci. Technol. A 10, 3229 (1992).
B. B. Dayton, Gas flow patterns at entrance and exit of cylindrical tubes, in: Proceedings of the 3rd AVS National Vacuum Symposium, Pergamon Press, (1957), p. 5.
W. Steckelmacher, Knudsen flow 75 years on: The current state of the art for flow of rarefied gases in tubes and systems, Rep. Prog. Phys. 49, 1083 (1986).
J. A. Giordmaine and T. C. Wang, Molecular beam formation by long parallel tubes, J. Appl. Phys. 31, 463 (1960).
R. H. Jones, D. R. Olander, and V. R. Kruger, Molecular-beam sources fabricated from multichan-nel arrays. I. Angular distributions and peaking factors, J. Appl. Phys. 40, 4641 (1969).
W. Steckelmacher, R. Strong, and M. W. Lucas, A simple atomic or molecular beam as target for ion-atom collision studies, J. Phys. D: Appl. Phys. 11, 1553 (1978).
A. Winkler and J. T. Yates, Capillary array dosing and angular desorption distribution measure-ments: A general formalism, J. Vac Sci. Technol. A 6, 2929 (1988).
S. Adamson and J. F. McGilp, Measurement of Gas Flux Distributions from Single Capillaries Using a Modified, UHV-compatible Ion Gauge, and Comparison with Theory, Vacuum 36, 227 (1986).
S. Adamson, C. O’Carroll, and J. F. McGilp, The Spatial Distribution of Flux Produced by Single Capillary Gas Dosers, Vacuum 38, 341 (1988).
S. Adamson, C. O’Carroll, and J. F. McGilp, The Angular Distribution of Thermal Molecular Beams Formed by Single Capillaries in the Molecular Flow Regime, Vacuum 38, 463 (1988).
A. M. Glines, R. N. Carter, and A. B. Anton, An alternative for gas dosing in ultrahigh vacuum adsorption studies, Rev. Sci. Instrum. 63, 1826 (1992).
D. R. Olander, Molecular-beam sources fabricated from multichannel arrays. II. Effect of source size and alignment, J. Appl. Phys. 40, 4650 (1969).
D. R. Olander and V. R. Kruger, Molecular beam sources fabricated from multichannel arrays. III. The exit density problem, J. Appl. Phys. 41, 2769 (1970).
H. C. W. Beijerinck and N. F. Verster, Velocity distribution and angular distribution of molecular beams from multichannel arrays, J. Appl. Phys. 46, 2083 (1975).
M. J. Bozack, L. Muehlhoff, J. N. Russel, Jr., W. J. Choyke, and J. T. Yates, Jr., Methods in semiconductor surface chemistry, J. Vac. Sci. Technol. 5, 1 (1987).
D. A. Scheinowitz, K. Werner, and S. Radelaar, Capillary arrays with variable channel density: An improved gas injection system, J. Vac. Sci. Technol. B 12, 3228 (1994).
D. E. Ibbotson, T. S. Wittrig, and W. H. Weinberg, The chemisorption and decomposition of NO on the (110) surface of iridium, Surf. Sci. 110, 294 (1981).
M. A. Henderson, R. D. Ramsier, and J. T. Yates, Minimizing ultrahigh vacuum wall reactions of Fe(CO)5 by chemical pretreatment of the dosing system, J. Vac. Sci. Technol. A 9, 2785 (1991).
P. K. Leavitt and P. A. Thiel, A warning concerning the use of glass capillary arrays in gas dosing: Potential chemical reactions, J. Vac. Sci. Technol. A 8, 148 (1990).
E. Apen, R. Wentz, F. Pompei, and J. L. Gland, Glass and polymer based dosing system for the introduction of reactive gases into ultrahigh vacuum, J. Vac. Sci. Technol. B 12, 2946 (1994).
M. A. Mendicino and E. G. Seebauer, Use of Teflon for minimizing spurious reactions in gas dosing and detection systems, J. Vac. Sci. Technol. A 10, 3590 (1992).
F. C. Henn, M. E. Bussell, and C. T. Campbell, A simple means for reproducibly dosing low vapor pressure and/or reactive gases to surfaces in ultrahigh vacuum, J. Vac. Sci. Technol. A 9, 10 (1991).
P. L. Hagans, B. M. DeKoven, and J. L. Womack, A laser drilled aperture for use in an ultrahigh vacuum gas doser, J. Vac. Sci Technol. A 7, 3375 (1989).
S. M. Gates, J. N. Russell, Jr., and J. T. Yates, Jr., Scanning kinetic spectroscopy (SKS): A new method for investigation of surface reaction processes, Surf. Sci. 159, 233 (1985).
R. C. Eden, Photoemission studies of the electronic band structures of gallium arsenide, gallium phosphide, and silicon, Stanford University, (1967), p. 303.
P. E. Gregory, P. Chye, H. Sunami, and W. E. Spicer, The oxidation of Cs-UV photoemission studies, J. Appl. Phys. 46, 3525 (1975).
N. Szydlo, R. Poirier, and M. Kleefstra, Reverse I-V characteristics of the Na-Si Schottky barrier, Appl. Phys. Lett. 17, 417 (1970).
R. D. Mathis Company, Thin Film Evaporation Source Guide, Long Beach, CA (1987).
P. della Porta, C. Emili, and S. J. Hellier, Alkali metal generation and gas evolution from alkali metal dispensers, SAES Getters, TR 18 (1968).
M. Succi, R. Canino, and B. Ferrario, Atomic absorption evaporation flow rate measurements of alkali metal dispensers, Vacuum 35, 579 (1985).
T. A. Giorgi, B. Ferrario, and B. Storey, An updated review of getters and gettering, J. Vac. Sci. Technol. A 3, 417 (1985).
R. A. dePaola, J. Hrbek, and F. M. Hoffmann, Potassium promoted C-O bond weakening on Ru(001). I. Through-metal interaction at low potassium coverage, J. Chem. Phys. 82, 2484 (1985).
T. K. Sham, M.-L. Shek, G.-Q. Xu, and J. Hrbek, Coverage dependence of photoemission core levels of alkali-metal overlayers, J. Vac. Sci. Technol. A 7, 2191 (1989).
S. D. Parker, Lithium adsorption on Ag(111): Characterization by AES and work function changes, Surf. Sci. 157, 261 (1985).
E. J. Nelson, T. Kendelewicz, P. Liu, and P. Pianetta, New Surface Phases for Potassium Adatoms on Cleaved Si(111), Surf. Sci. 380, 365 (1997).
R. Cao, H. Tang, and P. Pianetta, Negative Electron Affinity on the GaAs(110) with Cs and NF3: A Surface Science Study, SPIE Proc. 2550, 132 (1995).
R. L. Bell and W. E. Spicer, 3-5 compound photocathodes: A new family of photoemitters with greatly improved performance, Proc. IEEE 58, 1788 (1970).
SAES Getters, Alkali Metal Dispensers, Milan, Italy (1983).
J. Lilja, M. Toivonen, P. Wysocki, and M. Pessa, Growth of Li-doped ZnSe by molecular beam epitaxy using an alkali metal dispenser, Vacuum 40, 491 (1990).
E J. Esposto, K. Griffiths, P. R. Norton, and R. S. Timsit, Simple source of Li metal for evaporators in ultrahigh vacuum (UHV) applications, J. Vac. Sci. Technol. B 12, 3245 (1994).
A. Septier, F. Sabary, J. Dudek, and A. Boumiz, An alkali dispenser photocathode (AI-Li)-Ag-O-Li, C. R. Acad. Sci. Paris 314, 569 (1992).
S. Doniach and M. Sunjic, Many-electron singularity in X-ray photoemission and X-ray line spectra from metals, J. Phys. C (Sol. State Phys.) 3, 285 (1970).
B. Reihl and K. 0. Magnusson, Surface electronic structure of K on Si(111)2X1 as a function of potassium coverage, Phys. Rev. B 42, 11839 (1990).
R. L. Gerlach and T. N. Rhodin, Binding and charge transfer associated with alkali metal adsorption on single crystal nickel surface, Surf. Sci. 19, 403 (1970).
G. W. Gobeli and F. G. Allen, Surface measurements on freshly cleaved silicon p-n junctions, J. Phys. Chem. Solids 14, 23 (1960).
T. E. Gallon, I. G. Higginbotham, M. Prutton, and H. Tokutaka, The (100) surfaces of alkali halides, Surf. Sci. 21, 224 (1970).
M. Henzler, Leed investigation of step arrays on cleaved germanium (111) surfaces, Surf. Sci. 19, 159 (1970).
J. W. T. Ridgway and D. Haneman, Auger spectra and Leed patterns from vacuum cleaved silicon crystals with calibrated deposits of iron, Surf. Sci. 24, 451 (1971).
R. Dorn, H. Luth, and G. J. Russell, Adsorption of oxygen on clean cleaved (110) gallium-arsenide surfaces, Phys. Rev. B 10, 5049 (1974).
H. Froitzheim and H. Ibach, On the question of surface states on cleaved GaAs (110) surfaces, Surf. Sci. 47, 713 (1975).
D. Haneman, Atomic Structure of Surfaces, in: Surface Physics of Phosphorous and Semicon-ductors (C. G. Scott and C. E. Reed, eds.), Academic Press, New York (1975), p. 1.
A. Huijser and J. van Laar, Work function variations of gallium arsenide cleaved single crystals, Surf. Sci. 52, 202 (1975).
W. E. Spicer and P. E. Gregory, Surface and interface electronic structure of GaAs and other III-V compounds, Crit. Rev. Solid State Sci. 5, 231 (1975).
E. E. Chaban and J. E. Rowe, Vacuum cleavage technique for the HP5950A ESCA spectrometer, J. Electron Spectrosc. 9, 329 (1976).
J. D. V. Otterloo, Some Schottky barriers on clean-cleaved silicon, Thesis, Delft University of Technology (1977).
R. D. Bringans and R. Z. Bachrach, in: Semiconductor Surface and Interface States, in Synchrotron Radiation Research (R. Z. Bachrach, ed.), Plenum, New York (1992), p. 127.
P. Mark, P. Pianetta, I. Lindau, and W. E. Spicer, A comparison of LEED intensity data from chemically polished and cleaved GaAs(110) surfaces, Surf. Sci. 69, 735 (1977).
T. Angot, J. Suzanne, and J. Y. Hoarau, An original in situ cleaver for low temperature surface experiments, Rev. Sci. Instrum. 62, 1865 (1991).
J. T. Dickinson, L. C. Jensen, and M. R. McKay, Neutral molecule emission from the fracture of crystalline MgO, J. Vac. Sci. Technol. A 5, 1162 (1987).
M. Henzler, The roughness of cleaved semiconductor surfaces, Surf. Sci. 36, 109 (1973).
W. Gudat, D. E. Eastman, and J. J. Freeouf, Empty surface states on semiconductors: Their interactions with metal overlayers and their relation to Schottky bamers, J. Vac. Sci. Technol. 13, 250 (1976).
W. E. Spicer, I. Lindau, P. E. Gregory, C. M. Gamer, P. Pianetta, and P. W. Chye, Surface and interface electronic structure of GaAs and other III-V compounds, J. Vac. Sci. Technol. 13, 780 (1976).
L. J. Whitman, J. A. Stroscio, R. A. Dragoset, and R. J. Celotta, Scanning-tunneling-microscopy study of InSb(110), Phys. Rev. B 42, 7288 (1990).
B. M. Trafas, Y.-N. Yang, R. L. Siefert, and J. H. Weaver, Scanning tunneling microscopy of Ag growth on GaAs(110) at 300 K: From clusters to crystallites, Phys. Rev. B 43, 14107 (1991).
W. Monch, in: Semiconductor Surfaces and Interfaces, Springer Series in Surface Sciences, Vol. 26 (G. Ertl, ed.), Springer, Berlin (1995).
R. A. Schultz, M. C. Jensen, and R. C. Bradt, Single crystal cleavage of brittle materials, Int. J. Fracture 65, 291 (1994).
W. A. Harrison, Electronic Structure and the Properties of Solids, Freeman, San Francisco (1980).
D. Haneman, Surfaces ofsilicon, Rep. Prog. Phys. 50, 1045 (1987).
R. M. Tromp, L. Smit, and J. F. van der Veen, Si(111)-(2X1) surface: buckling, chains, or molecules?, Phys. Rev. Lett. 51, 1672 (1983).
R. E. Reed-Hill, Physical Metallurgy Principles, Van Nostrand, Princeton, NJ (1973).
M. Prutton, Introduction to Surface Physics, Oxford University Press, Oxford (1994).
J. J. Gilman, Direct measurement of the surface energies of crystals, J. Appl. Phys. 31, 2208 (1960).
J. E. Cordwell and D. Hull, Observations of(100) cleavage in <110> axis tungsten single crystals, Phil. Mag. 26, 215 (1972).
N. M. Giallourakis, D. K. Matlock, and G. Gauss, A cryogenic fracture technique for characterizing zinc-coated steels, Metallography 23, 209 (1989).
P. Bruesch, W. Foditsch, and F. Stucki, An in situ fracture stage for x-ray photoelectron spectroscopy and Auger electron spectroscopy studies of internal surfaces in polycrystalline materials, J. Vac. Sci. Technol. A 5, 3334 (1987).
R. D. Moorhead, Mechanical testing: In situ fracture device for Augerelectron spectroscopy, Rev. Sci. Instrum. 47, 455 (1976).
G. S. Was, H. H. Tischner, and J. R. Martin, An in situ slow extension rate fracture stage for Auger electronspectroscopy, J. Vac. Sci. Technol. A 1, 1477 (1983).
C. E. Kalnas, J. F, Mansfield, G. S. Was, and J. W. Jones, In situ bend fixture for deformation and fracture studies in the environmental scanning electron microscope, J. Vac. Sci. Technol. B 12, 883 (1994).
M. R. Barnes and L. D. Laude, A crystal cleaver and electron analyzer assembly for photoemission studies ofvacuum cleaved crystals, Rev. Sci. Instrum. 42, 1191 (1971).
A. P. Janssen and A. Chambers, A crystal cleavage device for use in ked-Auger studies, J. Phys. E: Sci. Instrum. 7, 425 (1974).
B. Dupoisson, P. Dumas, A. Steinbrunn, and J. C. Colson, Single crystal cleavage device adaptable to a UHV vessel, J. Phys. E: Sci. Instrum. 9, 266 (1976).
R. Carr, New ultrahigh-vacuum cleaver for brittle materials, Rev. Sci. Instrum. 59, 989 (1988).
C. Claeys, C. R. Henry, and C. Chapon, A crystal cleavage device for use with a standard UHV sample holderend, Meas. Sci. Technol. 2, 81 (1991).
D. G. Li, N. S. McAlpine, and D. Haneman, Progression of cleavage in Si, Ge and GaAs, Appl. Surf. Sci. 65/66, 553 (1993).
N. B. Kindig and W. E. Spicer, Vacuum system and cleaving mechanism for photoemission measurement of CdS single crystals in the vacuum ultraviolet, Rev. Sci. Instrum. 36, 759 (1965).
F. C. Hallberg, B. E. Woodgate, and J. S. J. Benedicto, Cleaving machines for soft and hard crystals, Rev. Sci. Instrum. 52, 759 (1981).
Copper and Brass Sales, CBS-003-06-96-Revised, Detroit, MI.
P. Pianetta, I. Lindau, P. E. Gregory, C. M. Gamer, and W. E. Spicer, Valencebandstudies of clean and oxygen exposed GaAs(l10) surfaces, Surf. Sci. 72, 298 (1978).
C. Kim, R. Cao, and P. Pianetta, Fermi Level Variation on GaAs(110) Surface with Sb Overlayer Studied with a Photoelectron Microscope, J. Vac. Sci. Technol B 11, 1575 (1993).
A. Humbert, M. Dayez, S. Granjeaud, P. Ricci, C. Chapon, and C. R. Henry, Ultrahigh vacuum and air observations ofPd clusters grown on clean graphite, J. Vac. Sci. Technol. B 9, 804 (1991).
N. Nakayama, T. Kuramachi, T. Tanbo, H. Ueba, and C. Tatsuyama, AES, LEELS and XPS studies on the interface formation between layered semiconductors GaSe and InSe, Surf. Sci. 244, 58 (1991).
R. H. Williams and A. J. McEvoy, Electron emission studies from GaSe surfaces, J. Vac. Sci. Technol. 9, 867 (1972).
D. E. Fowler, C. R. Brundle, J. Lerczak, and F. Holtzberg, Core and valence XPS spectra of clean, cleaved single crystals of YBa2Cu3O7, J. Electron Spectrosc. 52, 323 (1990).
P. Akavoor, R. B. Phelps, and L. L. Kesmodel, Charging effects in measurements of high-tem-perature superconductors with high resolution electron energy loss spectroscopy, J. Vac. Sci. Technol. B 12, 587 (1994).
H. L. Edwards, J. T. Markert, and A. L. de Lozanne, Surface structure of YBa3Cu3O7–xprobed by reversed biased scanning tunneling microscopy, J. Vac. Sci. Technol. B 12, 1886 (1994).
V. E. Henrich and P. A. Cox, The Surface Science of Metal Oxides, Cambridge University Press, Cambridge (1994).
W. Monch and P. P. Auer, On the geometrical structure of cleaved Si(111) surfaces, J. Vac. Sci. Technol. 15, 1230(1978).
K. 0. Magnusson, U. O. Karlsson, D. Straub, S. A. Flodstrom, and F. J. Himpsel, Angle-resolved inverse photoelectronspectroscopy studies of CdTe(110), CdS(1120) and CdSe(1120), Phys. Rev. B 36, 6566 (1987).
H. Qu, J. Kanski, P. O. Nilsson, and U. 0. Karlsson, Angle resolved photoelectron spectroscopy of the surface electronic structure of ZnTe(110), Phys. Rev. B 43, 9843 (1991).
X. Yu, L. Vanzetti, G. Haugstad, A. Raisanen, and A. Franciosi, Inequivalent sites for Hg at the HgTe(110) surface, Surf. Sci. 275, 92 (1992).
C. A. Papageorgopoulos, M. Kamaratos, A. Papageorgopoulos, A. Schellenberger, E. Holub-Krappe, C. Pettenkofer, and W. Jaegermann, Adsorption of Cs on WSe2 van der Waals surfaces: Temperature and sputter effects on growth properties, Surf. Sci. 275, 311 (1992).
A. Klein, C. Pettenkofer, W. Jaegermann, M. Lux-Steiner, and E. Bucher, A photoemission study of barrier and transport properties ofthe interfaces ofAu and Cu with WSe2(0001) surfaces, Surf. Sci. 321, 19 (1994).
J.-Y. Emery, L. Brahim-Ostmane, C. Hirlimann, and A. Chevy, Reflection high-energy electron diffraction studies of InSe and GaSe layered compounds grown by molecular beam epitaxy, J. Appl. Phys. 71, 3256 (1992).
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2002 Kluwer Academic Publishers
About this chapter
Cite this chapter
Pianetta, P.A. (2002). In Situ Processing by Gas or Alkali Metal Dosing and by Cleavage. In: Czanderna, A.W., Powell, C.J., Madey, T.E., Hercules, D.M., Yates, J.T. (eds) Specimen Handling, Preparation, and Treatments in Surface Characterization. Methods of Surface Characterization, vol 4. Springer, Boston, MA. https://doi.org/10.1007/0-306-46913-8_6
Download citation
DOI: https://doi.org/10.1007/0-306-46913-8_6
Publisher Name: Springer, Boston, MA
Print ISBN: 978-0-306-45887-3
Online ISBN: 978-0-306-46913-8
eBook Packages: Springer Book Archive