Advertisement

Prediction of Machining Responses in Wire EDM on Stainless Steel-316

  • G. UgrasenEmail author
  • D. Rakesh
  • H. V. Ravindra
  • K. Guruprasad
  • Sivanaga Malleswara Rao Singu
Conference paper
Part of the Lecture Notes on Multidisciplinary Industrial Engineering book series (LNMUINEN)

Abstract

In wire electrical discharge machining (WEDM), material is removed by means of the rapid and cyclic spark that discharges across the gap between the tool and workpiece. In the present work, process parameters of WEDM are tried to be optimize the response variable on Stainless Steel-316 alloy material. SS-316 combinations have been broadly utilized for their predominant properties. For example, high quality, high electrical and thermal conductivities, and low cost. The input parameters considered are pulse-on time, pulse-off time, and current to optimize the responses, viz. surface roughness (SR), volumetric material removal rate (VMRR), dimensional error (DE), and electrode wear (EW). Taguchi’s L27 orthogonal array was chosen to conduct the experiments according to design of experiments (DOE). SR is measured using surftron surface tester and VMRR is calculated based on machining time. DE and EW are measured by micrometer. By using artificial neural network, results were predicted and compared with the experimental results.

Keywords

Wire EDM Stainless steel-316 Artificial neural network (ANN) 

Notes

Acknowledgements

The work reported in this paper is supported by B.M.S. College of Engineering, through the Technical Education Quality Improvement Programme [TEQIP-III] of the MHRD, Government of India.

References

  1. 1.
    Liao, Y.S., Huang, J.T., Su, H.C.: A study on the machining parameters optimization wire electrical discharge machining. J. Mater. Process. Technol. 71, 487–493 (1997)CrossRefGoogle Scholar
  2. 2.
    Ravindranadh, B., Madhu, V., Gogia, A.K.: Effect of wire-EDM machining parameters on surface roughness and material removal rate of high strength armor steel. Mater. Manuf. Process. 28, 1–5 (2013)Google Scholar
  3. 3.
    Liao, Y.S., Huang, J.T., Chen, Y.H.: A study to achieve a fine surface finish in wire-EDM. J. Mater. Process. Technol. 149, 165–171 (2004)CrossRefGoogle Scholar
  4. 4.
    Ugrasen, G., Ravindra, H.V., Naveen Prakash, G.V., Teertha Prasad, Y.N.: Optimization of process parameters in wire EDM of HCHCr material using Taguchi’s technique. Mater. Today Proc. 2, 2443–2452 (2015)Google Scholar
  5. 5.
    Ugrasen, G., Ravindra, H.V., Naveen Prakash, G.V., Keshavamurthy, R.: Process optimization and estimation of machining performances using artificial neural network in wire EDM. Procedia Mater. Sci. 6, 1752–1760 (2014)CrossRefGoogle Scholar
  6. 6.
    Wang, Kesheng: A hybrid intelligent method for modelling the EDM process. Int. J. Mach. Tools Manuf. 43, 995–999 (2003)CrossRefGoogle Scholar
  7. 7.
    Shandilya, P., Jain, P.K., Jain, N.K.: Parametric optimization during wire electrical discharge machining using response surface methodology. Procedia Eng. 38, 2371–2377 (2012)CrossRefGoogle Scholar
  8. 8.
    Kumar, A., Kumar, A., Kumar, J.: Prediction of surface roughness in wire electric discharge machining (WEDM) process based on response surface methodology. Int. J. Eng. Technol. 2(4), 708–719 (2012)Google Scholar
  9. 9.
    Huang, J.T., Liao, Y.S.: Optimization of machining parameters of wire-EDM based on grey relational and statistical analyses. Int. J. Prod. Res. 41, 1707–1720 (2003)CrossRefGoogle Scholar
  10. 10.
    Tosun, N., Cogun, C., Tosun, G.: A study on kerf and material removal rate in wire electrical discharge machining based on Taguchi method. J. Mater. Process. Technol. 154, 316–322 (2004)CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2020

Authors and Affiliations

  1. 1.Department of Mechanical EngineeringB.M.S. College of EngineeringBengaluruIndia
  2. 2.Department of Mechanical EngineeringP.E.S. College of EngineeringMandyaIndia
  3. 3.Department of Mechanical EngineeringV.S.M College of EngineeringRamachandrapuramIndia

Personalised recommendations