Advertisement

Optimization of Cutting and Cutting Fluid Application Parameters in Turning of AISI 52100 Hardened Alloy Steel Under Minimal Cutting Fluid Application

  • Sandip ManeEmail author
  • Sanjay Kumar
Conference paper
  • 20 Downloads
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

Hardened alloy steel materials are in great demand in automotive and allied manufacturing industries due to their better strength, wear resistance and high thermal stability. The hard turning offers many potential benefits over conventional grinding operations. During hard turning, the excessive heat generation and temperature affects the tool wear, tool life and surface integrity of the machined components. The cutting force and cutting temperature are the important technological parameter to control the machining process. The cutting fluid removes and reduces the heat from the cutting zone through cooling and lubrication action, but the use of conventional cutting fluid is being restricted due to the cost, health and environmental concern associated with its use in machining processes. The machining performance and cost-effectiveness can be improved by minimizing the cutting fluid. The main objective of this research work was to investigate the effect of cutting parameters and cutting fluid application parameters on cutting force and cutting temperature in turning of AISI 52100 hardened alloy steel with multilayer coated carbide insert under minimal cutting fluid application. The result showed that the minimal cutting fluid application (MCFA) technique significantly reduces the cutting force and cutting temperature compared to dry turning.

Keywords

Hard turning Minimal cutting fluid application Tool life Surface integrity 

References

  1. 1.
    Huang Y, Chou YK, Liang SY (2007) CBN tool wear in hard turning: a survey on research progresses. Int J Adv Manuf Technol 35:443–453CrossRefGoogle Scholar
  2. 2.
    Pal A, Choudhury SK, Chinchanikar S (2014) Machinability assessment through experimental investigation during hard and soft turning of hardened steel. Procedia Mater Sci 6:80 –91Google Scholar
  3. 3.
    Bartarya G, Choudhury SK (2012) Effect of cutting parameters on cutting force and surface roughness during finish hard turning AISI52100 grade steel. Procedia CIRP 1:651–656CrossRefGoogle Scholar
  4. 4.
    Bartarya G, Choudhury SK (2014) Influence of machining parameters on forces and surface roughness during finish hard turning of EN 31 steel. Proc IMechE Part B: J Eng Manuf 228(9):1068–1080CrossRefGoogle Scholar
  5. 5.
    Fnides B, Yallese MA, Aouici H (2008) Hard turning of hot work steel AISI H11: evaluation of cutting pressures, resulting force and temperature. Mechanika 72:59–63Google Scholar
  6. 6.
    Lin HM, Liao YS, Wei CC (2008) Wear behavior in turning high hardness alloy steel by CBN tool. Wear 264:679–684CrossRefGoogle Scholar
  7. 7.
    Bouchelaghem H, Yallese MA, Mabrouki T, Amirat A, Rigal JF (2010) Experimental investigation and performance analyses of CBN insert in hard turning of cold work tool steel (D3). Int J Mach Sci Technol 14:471–501CrossRefGoogle Scholar
  8. 8.
    Philip PK, Varadarajan AS, Ramamoorthy B (2000) Influence of cutting fluid composition and delivery variables on performance in hard turning using minimal fluid in pulsed jet form. J Inst Eng (India) 68–72Google Scholar
  9. 9.
    Vikram Kumar CHR, Ramamoorthy B (2007) Performance of coated tools during hard turning under minimum fluid application. J Mater Process Technol 185:210–216Google Scholar
  10. 10.
    Varadarajan AS, Philip PK, Ramamoorthy B (2002) Investigations on hard turning with minimal cutting fluid application (HTMF) and its comparison with dry and wet turning. Int J Mach Tools Manuf 42:193–200CrossRefGoogle Scholar
  11. 11.
    Sam Paul P, Varadarajan AS (2013) Performance evaluation of hard turning of AISI 4340 steel with minimal fluid application in the presence of semi-solid lubricants. Proc IMechE Part J: J Eng Tribol 227(7):738–748CrossRefGoogle Scholar
  12. 12.
    Raj A, Leo Dev Wins K, Varadarajan AS (2016) Evaluation of the performance during hard turning of OHNS steel with minimal cutting fluid application and its comparison with minimum quantity lubrication. In: IOP conference series: materials science and engineering, vol 149, pp 012021.  https://doi.org/10.1088/1757-899X/149/1/012021

Copyright information

© Springer Nature Singapore Pte Ltd. 2020

Authors and Affiliations

  1. 1.Department of Mechanical EngineeringDwarkadas J. Sanghvi College of EngineeringMumbaiIndia
  2. 2.Department of Mechanical EngineeringThakur College of Engineering and TechnologyMumbaiIndia

Personalised recommendations