Advertisement

Selection and Application of Tapchangers to Transformers

  • T. V. SridharEmail author
Chapter
  • 7 Downloads
Part of the Power Systems book series (POWSYS)

Abstract

In this chapter we consider the selection criteria and applications of tapchangers to transformers. The transformer is a flexible component in the power network. It can take many forms and shapes to satisfy the user’s requirements. Its companion the tapchanger follows suit. In this chapter we consider many “standard” applications, and some unusual executions of tapchangers.

References

  1. 1.
    IEC 60 214:2014-05 International Standard “Tap-changers”Google Scholar
  2. 2.
    IEC 60 076:2000-4 International Standard “Power Transformers”Google Scholar
  3. 3.
    Blume et al., Transformer engineering. Wiley, New York Google Scholar
  4. 4.
    Transformer Inrush current reduction, Doug Taylor, University of Idaho PresentationGoogle Scholar
  5. 5.
  6. 6.
    Case study of transformer magnetizing inrush current as a serious issue: T.V. Sridhar. Unpublished internal Report. 2018. drsridhar53@gmail.comGoogle Scholar
  7. 7.
    IEC 60 076-7: Loading guide for oil immersed power transformerGoogle Scholar
  8. 8.
    Chiplonkar AV (2008) Design, operation, maintenance of core type oil filled power transformers. Self Published. avchiplonkar@gmail.comGoogle Scholar
  9. 9.
    Del Vecchio R et al (2001) Transformer design principles. CRC PressGoogle Scholar
  10. 10.
    Kerenyi, Karsai, Kiss (1967) Large power transformers. Elsevier, New York. And P.O.Box 149, H-1389. Budapest, HungaryGoogle Scholar
  11. 11.
    Kraemer A, On load tapchangers for power transformers. MR PublicationGoogle Scholar
  12. 12.
    IEC International Standard IEC 60 214-1 2014-05. International standard tap-changers: Cl. 4.1, Table 4.1Google Scholar
  13. 13.
    ABB Publication 1ZSE 5492-104 en, Rev/09: On load tapchangers Type UZ, Technical GuideGoogle Scholar
  14. 14.
    MR on-load tap-changer OILTAP® M, Technical Data TD 50/ReferencesGoogle Scholar
  15. 15.
    IEC 60 214 2014(05). International standard tap-changers. Sect 5.2.6.2, Mechanical endurance testsGoogle Scholar
  16. 16.
    MR Knowledge base: PB 351 8312/01 En F031 0301-09/14 MR 2013: alternative liquid for tapchangers. Rainer FrotscherGoogle Scholar
  17. 17.
    www.transformers.magazine.com. TM 10_20_27_Frotscher.pdf. Column Tap-changer know-how. Insulating liquids: Part II: non mineral insulating liquids. Rainer Frotscher
  18. 18.
    CIGRÉ D1-105 2012. Behaviour of ester liquids under dielectric and thermal stress—from laboratory testing to practical use. R. Frotscher, Maschinenfabrik Reinhausen D. Vukovi, M. Jovalekic, S. Tenbohlen, Germany Universität Stuttgart, Germany. J. Harthun, C. Perrier, Alstom Germany, M. Schäfer, EnBW Regional AG Germany/FranceGoogle Scholar
  19. 19.
    Dohnal D, Frotscher R (2010) The importance of alternative insulating liquids for power “transformers and tap-changers”. CEPSI Contribution, TaipeiGoogle Scholar
  20. 20.

Copyright information

© Springer Nature Singapore Pte Ltd. 2020

Authors and Affiliations

  1. 1.ChennaiIndia

Personalised recommendations