Advertisement

Motorized Spindle Drive Mode and Its Basic Theory

  • Yuhou WuEmail author
  • Lixiu Zhang
Chapter
  • 26 Downloads
Part of the Springer Tracts in Mechanical Engineering book series (STME)

Abstract

Motion control is the core of motorized spindle control system. The variable-voltage variable-frequency speed regulation system of motorized spindle is often called variable-frequency speed regulation system. Since slip power does not change with rotational speed during speed regulation, the speed range is wide and the working efficiency is high at both high and low speeds.

References

  1. 1.
    Zhao HS, Luo Y, Liu X (2010) Analysis on no-load iron losses distribution of asynchronous motors with time-stepping finite element method. In: Proceedings of the CSEE 2010, vol 30, pp 475–478Google Scholar
  2. 2.
    Zhang LX, Liu XH (2012) Modeling and simulation analysis of motorized spindle vector control. In: International Conference on Mechatronics and Intelligent Materials (MIM), GuiLin, China, 2012Google Scholar
  3. 3.
    Zhang K, Liu ZX, Zhang LX et al (2012) Design and simulation of high-speed electric spindle modeling and vector controller based on slip frequency control. J Shenyang Jianzhu Univ (Natural Science Edition) 28:1114–1120Google Scholar
  4. 4.
    Wu YH, Pan ZN, Zhang LX et al (2016) Vibration test of improved direct torque control on electric spindle. J Harbin Inst Technol 48:174–177Google Scholar
  5. 5.
    Wu YH, Li Y, Zhang LX et al (2014) Modeling and simulation of high speed electric spindle based on three-level inverter. J Shenyang Jianzhu Univ (Natural Science Edition) 30(06):1103–1112Google Scholar
  6. 6.
    Zhang K, Xu XH, Tong J et al (2007) Design and simulation of electric spindle direct torque control system. Manuf Technol Mach Tools 08:31–35Google Scholar
  7. 7.
    Zhang K, Tong J, Xu XH et al (2007) Modeling and simulation of high-speed electric spindle direct torque control system. J Shenyang Jianzhu Univ (Natural Science Edition) 04:664–667Google Scholar
  8. 8.
    Zhang K, Xu XH, Wang LJ, Wu YH (2006) Design of direct torque control system for high speed electric spindle under PMAC2. J Shenyang Jianzhu Univ (Natural Science Edition) 04:691–695Google Scholar
  9. 9.
    Xu XH, Zhang K, Wu YH et al (2006) High-speed electric spindle direct torque control speed control system. Dev Innov Mach Electr Prod 03:144–146Google Scholar
  10. 10.
    Wu YH, Pan ZN, Zhang LX (2016) Vibration test of improved direct torque control on electric spindle. J Harbin Inst Technol 48(11):174–177Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2020

Authors and Affiliations

  1. 1.School of Mechanical EngineeringShenyang Jianzhu UniversityShenyangChina
  2. 2.School of Mechanical EngineeringShenyang Jianzhu UniversityShenyangChina

Personalised recommendations