Advertisement

Reliability Research on Impedance Source Inverters

  • Hongpeng LiuEmail author
  • Zichao Zhou
  • Yuhao Li
  • Wentao Wu
  • Jiabao Jiang
  • Enda Shi
Chapter

Abstract

Advances in power electronics enable efficient and flexible processing of electric power in the application of renewable energy sources, electric vehicles, adjustable-speed drives, etc. More and more efforts are devoted to better power electronic systems in terms of reliability to ensure high availability, long lifetime, sufficient robustness, low maintenance cost, and low cost of energy. The reliability of electronic components was the subject of intensive research over the past decades, and further intensive research will certainly be continued in the future, i.e., the component manufacturers are pressed by new and stringent reliability demands from the component users. On the other hand, the component and technology complexities are continuously growing and setting new problems in analysis and design of component reliability. The component reliability level is increased by improving the design and component technology, and there are real problems to verify the component reliability in a traditional way and to convince the component buyers that a particular product indeed is as reliable as the manufacturer might claim. This chapter will introduce the method of reliability evaluation on impedance source inverters to give an outline on how to design reliability into the power electronic products from the early concept phase.

References

  1. 1.
    C. Hendricks, E. George, M. Osterman, M. Pecht, 3-Physics-of-failure (PoF) methodology for electronic reliability, in Reliability Characterisation of Electrical and Electronic Systems, ed. by J. Swingler (Woodhead Publishing, Sawston, 2015), pp. 27–42CrossRefGoogle Scholar
  2. 2.
    B. Tuchband, N. Vichare, M. Pecht, A method for implementing prognostics to legacy systems, in Proceedings of IMAPS Military, Aerospace, Space and Homeland Security: Packaging Issues and Applications (2006)Google Scholar
  3. 3.
    S. Yang, A.T. Bryant, P.A. Mawby, D. Xiang, L. Ran, P. Tavner, An industry-based survey of reliability in power electronic converters. IEEE Trans. Ind. Appl. 47(3), 1441–1451 (2011)CrossRefGoogle Scholar
  4. 4.
    D. Ton, W. Bower, Summary Report on the DOE High-Tech Inverter Workshop (United States Department of Energy, Washington, DC, USA, 2005)Google Scholar
  5. 5.
    Navigant Consulting Inc., A review of PV inverter technology cost and performance projection. National Renewable Energy Lab., Golden, CO, USA, Tech. Rep. NREL-SR-620-38771 (2006)Google Scholar
  6. 6.
    E. Wolfgang, Examples for failures in power electronics systems, in Proceedings of Tutorial on Reliability of Power Electronic Systems (2007), pp. 1–5Google Scholar
  7. 7.
    M.A. Vogelsberger, T. Wiesinger, H. Ertl, Life-cycle monitoring and voltage-managing unit for dc-link electrolytic capacitors in PWM converters. IEEE Trans. Power Electron. 26(2), 493–503 (2011)CrossRefGoogle Scholar
  8. 8.
    M. Marz, A. Schletz, B. Eckardt, S. Egelkraut, H. Rauh, Power electronics system integration for electric and hybrid vehicles, in Proceedings of International Conference on Integrated Power Electronics Systems (2010), pp. 1–10Google Scholar
  9. 9.
    G. Kuegerl, Technologies & products press conference—CeraLink—new dimensions in capacitor technology (2012) [Online]. Available: http://www.epcos.com/blob/514492/download/2/presentationkuegerl-pdf.pdf
  10. 10.
    L.L. Maccomber, Aluminum electrolytic capacitors in power electronics, in Proceedings IEEE Applied Power Electronics Conference and Exposition Conference (2011), pp. 1–14, Cornell Dubilier Special SessionGoogle Scholar
  11. 11.
    H. Wen, W. Xiao, P. Armstrong, Analysis and evaluation of dc-link capacitors for high-power-density electric vehicle drive systems. IEEE Trans. Veh. Technol. 61(7), 2950–2964 (2012)CrossRefGoogle Scholar
  12. 12.
    R.S. Alwitt, R.G. Hills, The chemistry of failure of aluminum electrolytic capacitors. IEEE Trans. Parts Mater. Packag. PMP-I(2), 28–34 (1965)CrossRefGoogle Scholar
  13. 13.
    Application Guide, Aluminum Electrolytic Capacitors (Cornell Dubilier, Liberty, SC, USA) [Online]. Available: http://www.cde.com/catalogs/AEappGUIDE.pdf
  14. 14.
    EPCOS Data Book-Aluminum Electrolytic Capacitors, 2013 edn. (Germany, 2012)Google Scholar
  15. 15.
    Aluminum capacitors catalogue—technical note on judicious use of aluminum electrolytic capacitors, Nippon Chemi-con, Tokyo, Japan (2013) [Online]. Available: http://www.chemi-con.com/2013AluminumElectrolyticCatalog.pdf
  16. 16.
    A. Ritter, Capacitor Reliability Issues and Needs. Presented at the Sandia Nat. Lab. Utility-Scale Grid-Tied PV Inverter Reliability Technical Workshop, Albuquerque, NM, USA (2011)Google Scholar
  17. 17.
    Q. Sun, Y. Tang, J. Feng, T. Jin, Reliability assessment of metallized film capacitors using reduced degradation test sample. J. Qual. Eng. Int. 29(2), 259–265 (2013)CrossRefGoogle Scholar
  18. 18.
  19. 19.
  20. 20.
    Capacitors for Power Electronics—Application Notes—Selection Guide, Electronicon (Gera, Germany, 2013) [Online]. Available: http://www.electronicon.com/fileadmin/inhalte/pdfs/downloadbereich/Katalog/neue_Kataloge_2011/application_notes.pdf
  21. 21.
    B.S. Rawal, N.H. Chan, Conduction and failure mechanisms in barium titanate based ceramics under highly accelerated conditions, in AVX Corp. Techn. Inf., vol. 6 (1984)Google Scholar
  22. 22.
    D. Liu, M.J. Sampson, Some aspects of the failure mechanisms in BaTiO3—based multilayer ceramic capacitors, in Proceedings of CARTS International (2012), pp. 59–71Google Scholar
  23. 23.
    M.J. Cozzolino, Electrical shorting in multilayer ceramic capacitors, in Proceedings of CARTS International (2004), pp. 57–68Google Scholar
  24. 24.
    J.L. Stevens, J.S. Shaffer, J.T. Vandenham, The service life of large aluminum electrolytic capacitors: effects of construction and application. IEEE Trans. Ind. Appl. 38(5), 1441–1446 (2002)CrossRefGoogle Scholar
  25. 25.
    R.M. Kerrigan, Metallized polypropylene film energy storage capacitors for low pulse duty, in Proceedings of CARTS USA (2007), pp. 97–104Google Scholar
  26. 26.
    R.W. Brown, Linking corrosion and catastrophic failure in low-power metallized polypropylene capacitors. IEEE Trans. Device Mater. Reliab. 6(2), 326–333 (2006)MathSciNetCrossRefGoogle Scholar
  27. 27.
    C. Hillman, Uprating of ceramic capacitors, DfR Solution White PaperGoogle Scholar
  28. 28.
    Y. Yang, H. Wang, F. Blaabjerg, K. Ma, Mission profile based multi-disciplinary analysis of power modules in single-phase transformerless photovoltaic inverters, in 2013 15th European Conference on Power Electronics and Applications (EPE) (Lille, 2013), pp. 1–10Google Scholar
  29. 29.
  30. 30.
    B. Gu, J. Dominic, J.-S. Lai, C.-L. Chen, T. LaBella, B. Chen, High reliability and efficiency single-phase transformerless inverter for grid-connected photovoltaic systems. IEEE Trans. Power Electron. 28(5), 2235–2245 (2013)CrossRefGoogle Scholar
  31. 31.
    H. Wang, K. Ma, F. Blaabjerg, Design for reliability of power electronic systems, in IEEE IECON (2012), pp. 33–44Google Scholar
  32. 32.
    P. McCluskey, Reliability of power electronics under thermal loading. CIPS (2012), pp. 1–8Google Scholar
  33. 33.
    K. Ma, M. Liserre, F. Blaabjerg, T. Kerekes, Thermal loading and lifetime estimation for power device considering mission profiles in wind power converter. IEEE Trans. Power Electron. 30(2) (2015), 590–602CrossRefGoogle Scholar
  34. 34.
    H. Huang, P.A. Mawby, A lifetime estimation technique for voltage source inverters. IEEE Trans. Power Electron. 28(8), 4113–4119 (2013)CrossRefGoogle Scholar
  35. 35.
    J.W. Kolar, S.D. Round, Analytical calculation of the RMS current stress on the dc-link capacitor of voltage-PWM converter systems [J]. Electr. Power Appl. 153(4), 535–543 (2006)CrossRefGoogle Scholar
  36. 36.
    M.L. Gasperi, Life prediction model for aluminum electrolytic capacitors, in IAS’96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting (1996), pp. 1347–1351Google Scholar
  37. 37.
    P. O’Connor, A. Kleyner, Practical Reliability Engineering, 5th edn. (Wiley, New York, NY, USA, 2012)Google Scholar
  38. 38.
    ZVEL, How to Measure Lifetime for Robustness Validation—Step by Step (ZVEL, Elea, Greece, 2012)Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2020

Authors and Affiliations

  1. 1.Northeast Electric Power UniversityJilinChina
  2. 2.Aalborg UniversityAalborgDenmark
  3. 3.Delta Electronic Enterprise Management (Shanghai) co., LtdShanghaiChina
  4. 4.China Southern Power Grid Co., LtdShenzhen Power Supply BureauShenzhenChina
  5. 5.State Grid Zhejiang Electric Power Company Hangzhou Power Supply CompanyHangzhouChina
  6. 6.Harbin Institute of TechnologyHarbinChina

Personalised recommendations