Advertisement

Switched Reluctance Motor Converter Topologies: A Review

  • Velakurthi Mahesh Kumar
  • K. Vinoth Kumar
  • R. Saravanakumar
Conference paper
  • 16 Downloads
Part of the Lecture Notes in Electrical Engineering book series (LNEE, volume 626)

Abstract

Many reserachers focuses on the special machine like Switched reluctance motor (SRM) because of peculiar performance compared to various standard motors. This paper reviews the various power convertor topologies developed for the SRM. Switched reluctance motor (SRM) is gaining abundant interest in industrial applications like wind energy systems and electrical vehicles—thanks to its straightforward and rugged construction, high‐speed operation ability, inability to warm temperature, and its options of fault tolerance. This paper provides indepth analysis with completely different topologies have been emerged and presented less torsion ripple, high potency, high power issue, and high power density. However, there has forever been a trade‐off between gaining a number of the advantageous and losing some with every new technology. During this chapter, numerous SRM topologies, design, principle of operation, and individual section change schemes are extensively reviewed, and their blessings and downsides are mentioned.

Keywords

Switched reluctance motor Torque ripple Harmonics 

References

  1. 1.
    F. Peng, A. Emadi, A digital PWM current controller for switched reluctance motor drivesGoogle Scholar
  2. 2.
    Y. Guo, Q. Ma, Relative study on torque ripple suppression method of three-phase 6/4 switched reluctance motorGoogle Scholar
  3. 3.
    F. Sofiane, H. Le-Huy, I. Kamwua, Fluffy direct adaptive direct torque control of switched reluctance motorGoogle Scholar
  4. 4.
    Dr. E.V.C.S. Rao, Torque ripple minimization of switched reluctance motor by using fuzzy logic controllerGoogle Scholar
  5. 5.
    L.O.P. Henriques, L.G.B. Rolim, W.I. Suemitsu, P.C. Branco, J.A. Dente, Torque ripple minimization of switched reluctance drive using a neuro-fuzzy control techniqueGoogle Scholar
  6. 6.
    P. Ramesh, P. Subbaiahissn, Speed control of SR drive using FLC. Int. J. Grid Distributed comput. 8(6), 185–192 (2015)CrossRefGoogle Scholar
  7. 7.
    L. Kalaivani, P. Subburaj, W.I. Mariasiluvairaj, Man-made reasoning based control for torque ripple minimization in switched reluctance motor drivesGoogle Scholar
  8. 8.
    F. Peng, J. Ye, A. Emadi, Y. Huangieee, Position sensor less control of switched reluctance motor drives based on numerical methodGoogle Scholar
  9. 9.
    A. Kabir, I. Husain, Fragmented rotor design of concentrated wound Switched Reluctance Motor (SRM) for torque ripple minimizationGoogle Scholar
  10. 10.
    Y. Sozer, I. Husain, Direction in choosing propelled control procedure for exchanged hesitance machine drives in developing applications. IEEE Exchange Ind. Appl.  https://doi.org/10.1109/tia.2015.2444357
  11. 11.
    H. Cheng, H. Chen, Z. Yang, Normal torque control of exchanged hesitance machine drives for electric vehicles.  https://doi.org/10.1049/iet-epa.2014.0424. ISSN 1751-8660
  12. 12.
    R. Madhavan, B.G. Fernndes, Execution improvement in the pivotal transition fragmented rotor-exchanged hesitance engine. IEEE Exchanges Vitality Transform.Google Scholar
  13. 13.
    J. Ye, B. Berkerbilgin, A. Emadi, An broadened speed low-swell torque control of exchanged hesitance engine drived. IEEE Exchange Power Electron.  https://doi.org/10.1109/TPEL.2014.2316272
  14. 14.
    Z. Xu, D-H. Lee, Comparative examination of bearingless exchanged hesitance engines with decoupled suspending power control. IEEE Exchange Ind. Appl.  https://doi.org/10.1109/TIA.2014.2331422
  15. 15.
    V. P. Vujicic, Minimization of torque swell and copper misfortunes in exchanged hesitance drive. IEEE Exchange Power Hardware. 27(1) (2012)Google Scholar
  16. 16.
    S. Kumarsahoo, S. Dasgupta, A Lyapunov work based vigorous direct torque controller for an exchanged hesitance engine drive framework. IEEE Exchange Power Gadgets. 27(2) (2012)Google Scholar
  17. 17.
    J.M. Stephenson, A. Hughes and R. Mann, Torque swell minimization in an exchanged hesitance engine by ideal symphonious current infusion. IEEE procedures online no. 20010480.  https://doi.org/10.1049/ip-epa:20010480
  18. 18.
    J. Keyan, Study on direct torque control arrangement of exchanged hesitance engine. IEEE 978-1-4244-97’8/11/2011Google Scholar
  19. 19.
    C. Gan, J. Wu, A audit on machine topologies and control systems for low – clamor exchanged hesitance engines in electric vehicle applications. IEEE Access 16, 31430–31443 (2018)CrossRefGoogle Scholar
  20. 20.
    C. Li, G. Wang, An improved finite– state prescient torque control for exchanged hesitance engine drive. IET Electric Power Appl.Google Scholar
  21. 21.
    I. Relev, F. Qi, B. Burkhart, Imapct of smooth torque control on the effectiveness of a rapid car exchanged hesitance drive. IEE Trans. Ind. Appl.  https://doi.org/10.1109/tia.2017.2743680
  22. 22.
    X. Deng, B.C. Mecrow, R. Marin, Design and advancement of low torque swell variable-speed drive framework with six-stage exchanged hesitance motors. IEE Trans. Vitality Convers.  https://doi.org/10.1109/tec.2017.2753286
  23. 23.
    H.N. Huang, K. Hu, Switch-mode rectifier sustained exchanged hesitance engine drive with dynamic compensation moving utilizing dc connect current. IET Electric Power Appl.Google Scholar
  24. 24.
    D. Peter, P. Rafajdus, Control of exchanged hesitance engine by flow profiling under ordinary and open stage working condition. IET Electric Power Appl.Google Scholar
  25. 25.
    Y. Hu, W. Ding, T. Wang, Investigation on a multi-mode exchanged hesitance motor: design, optimization, electromagnetic investigation and experiment. IEE Trans. Modern GadgetsGoogle Scholar
  26. 26.
    E. Bostanci, M. Moallem, Opportunities and difficulties of exchanged hesitance engine drive for electric propulsion: a comparative study. IEEE Trans. Transp. ZapGoogle Scholar
  27. 27.
    M. Jafari, H. Kermanipour, B. Ganji, Modification in geometric structure of twofold – sided pivotal transition exchanged hesitance engine for relieving torque swell adjustment dela structure geometrique dun motion hub a hesitance drive AFSRM a twofold face pour uneondulation de couple attenuee. 38(4) (2015)Google Scholar
  28. 28.
    N. Kurihara, J. Bayless, Noise decrease of exchanged hesitance engine with high number of posts by novel streamlined current waveform at low speed and low torque region. IEE Trans. Ind. Appl.Google Scholar
  29. 29.
    H. Chen, D. Zhang, ZY. Cong, ZF. Zhang, Fluffy logic control for switched hesitance engine drive, in Proceedings of the First International Conference on Machine Learning and Cybernetics, Beijing, 45 November 2002Google Scholar
  30. 30.
    C. Shang, D. Reay, B. Williams, Adjusting CMAC neural networks with constrained LMS algorithm for efficient torque ripple decrease in switched reluctance motors. IEEE Trans. Control Syst. Technol. 7(4), 401–413 (1999)CrossRefGoogle Scholar
  31. 31.
    I. Kioskeridis, C. Mademlis, A unified approach for four-quadrant optimal controlled switched reluctance machine drives with smooth transition between control operations. IEEE Trans. Power Electron. 24(1), 301–306 (2009)CrossRefGoogle Scholar
  32. 32.
    H. Gao, F.R. Salmasi, M. Ehsani, Inductance model-based sensor less control of the switched reluctance motor drive at low speed. IEEE Trans. Power Electron. 19(6), 1568–1573 (2004)CrossRefGoogle Scholar
  33. 33.
    M. Rodrigues, P.J. Costa Branco, W. Suemitsu, Fluffy logic torque ripple reduction by turn-off angle compensation for switched reluctance motors. IEEE Trans. Ind. Electron. 48(3), 711–715 (2001)CrossRefGoogle Scholar
  34. 34.
    X. Li, P. Shamsi, Inductance surface learning for model predictive current control of switched reluctance motors.  https://doi.org/10.1109/tte.2015.2468178
  35. 35.
    Y. Sato, Improvement of a 2-degree-of-freedom rotational/linear switched reluctance motor. IEEE Trans. Magn. 43(6), 2564–2566 (2007)CrossRefGoogle Scholar
  36. 36.
    S.M. Lukic, A. Emadi, State-switching control technique for switched reluctance motor drives: theory and implementation. IEEE Trans. Ind. Electron. 57(9), 2932–2938 (2010)CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2020

Authors and Affiliations

  • Velakurthi Mahesh Kumar
    • 1
  • K. Vinoth Kumar
    • 1
  • R. Saravanakumar
    • 2
  1. 1.Department of EEEKarunya Institute of Technology and SciencesCoimbatoreIndia
  2. 2.Department of EEEVellore Institute of TechnologyChennaiIndia

Personalised recommendations