Advertisement

Diatomaceous soils: a less than cromulent engineering material

  • T. Matthew EvansEmail author
  • Diane Moug
Conference paper
Part of the Lecture Notes in Civil Engineering book series (LNCE, volume 62)

Abstract

Diatoms are unicellular microalgae found in both fresh and salt water around the world, and their fossils have a large impact on geotechnical behaviour of soil deposits. The diatom cell wall, called a frustule, is comprised of hydrated silicon dioxide. The frustule has very high intra particle porosity and an intricately patterned porous surface. Previous studies show non-standard geotechnical behavior for diato- maceous soils: they are extraordinarily porous (sometimes up to 90% voids by volume), have high liquid limits and plastic limits, and are very compressible, yet they exhibit large shear strengths. This manuscript provides a broad review of previous work on the engineering behavior of diatomaceous soils. This review is then supplemented by laboratory and in-situ characterization results for diatomaceous soils found in the northwest United States which show that standard geotechnical interpretations and correlations are not ap- propriate for diatomaceous soils.

Keywords

diatomaceous soil problem soils laboratory testing in-situ characterization 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. Antonides, L. E. (1998). “Diatomite.” USGS Minerals Yearbook, United States Geological Survey, 7 pp.Google Scholar
  2. Bardet, J.-P. (1997). Experimental soil mechanics. Prentice Hall, Upper Saddle River, New Jersey. Becker, D. E., Crooks, J. H. A., Been, K., and Jefferies, M. G. (1987). “Work as a criterion for determining in situ and yield stresses in clays.” Canadian Geotechnical Journal, 24(4), 549–564.Google Scholar
  3. Been, K., and Jefferies, M. G. (1985). “A state parameter for sands.” Géotechnique, 35(2), 99–112CrossRefGoogle Scholar
  4. Bjerrum, L. (1967). “Engineering geology of Norwegian normally-consolidated marine clays as related to settlements of buildings.” Geotechnique, Thomas Telford Ltd, 17(2), 83–118.CrossRefGoogle Scholar
  5. Caicedo, B., Mendoza, C., López, F., and Lizcano, A. (2018). “Behavior of diatomaceous soil in lacustrine deposits of Bogotá, Colombia.” Journal of Rock Mechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences, 10(2), 367–379.Google Scholar
  6. Day, R. W. (1995). “Engineering Properties of Diatomaceous Fill.” Journal of Geotechnical Engineering, 121(12), 908–910.CrossRefGoogle Scholar
  7. Díaz-Rodríguez, J. A. (2003). “Characterization and engineering properties of Mexico City lacustrine soils.” Proceedings of the International Workshop on Characterisation and Engineering Properties of Natural Soils, Tan et al., ed., Taylor and Francis, Singapore, 725–755.Google Scholar
  8. Díaz-Rodríguez, J. A. (2011). “Diatomaceous soils: monotonic behavior.” International Symposium on Deformation Characteristics of Geomaterials, Taylor and Francis, Seoul, Korea.Google Scholar
  9. Díaz-Rodríguez, J. A., and González-Rodríguez, R. (2013). “Influence of diatom microfossils on soil compressibility.” Proceedings of the 18th International Conference on Soil Mechanics and Geotechnical Engineering, P. Delage, J. Desrues, F. Roger, Puech Alain, and F. Schlosser, eds., Presses des Ponts, Paris, France.Google Scholar
  10. Díaz-Rodríguez, J. A., Leroueil, S., and Alemán, J. D. (1992). “Yielding of Mexico City Clay and Other Natural Clays.” Journal of Geotechnical Engineering, 118(7), 981–995.CrossRefGoogle Scholar
  11. Díaz-Rodríguez, J. A., Lozano-Santa Cruz, R., Davila-Alcocer, V. M., Vallejo, E., and Girón, P. (1998). “Physical, chemical, and mineralogical properties of Mexico City sediments: A geotechnical perspective.” Canadian Geotechnical Journal, 35(4), 600–610.CrossRefGoogle Scholar
  12. Díaz-Rodríguez, J. A., and Moreno-Arriaga, A. (2017). “Contributions of diatom microfossils to soil compressibility.” Proceedings of the 19th International Conference on Soil Mechanics and Geotechnical Engineering, W. Lee, J.-S. Lee, H.- K.Kim, and D.-S. Kim, eds., Korean Geotechnical Society, Seoul, Korea, 349–352.Google Scholar
  13. Díaz-Rodríguez, J. A., and Santamarina, J. C. (1999). “Thixotropy: the case of Mexico city soils.” XI Panamerican Conf. on Soil Mech. and Geotech. Eng, Foz do Iguaçu, Brazil, 441–448.Google Scholar
  14. Díaz-Rodríguez, J. A., and Santamarina, J. C. (2001). “Mexico City Soil Behavior at Different Strains: Observations and Physical Interpretation.” Journal of Geotechnical and Geoenvironmental Engineering, 127(9), 783–789.CrossRefGoogle Scholar
  15. Evans, T. M., and Simpson, D. C. (2015). “Innovative data acquisition for the fall cone test in teaching and research.” Geotechnical Testing Journal, 38(3).CrossRefGoogle Scholar
  16. Franklin, D. (2004). “Gas Guzzlers.” Smithsonian.Google Scholar
  17. Hagerty, M. M., Hite, D. R., Ullrich, C. R., and Hagerty, D. J. (1993). “One-Dimensional High- Pressure Compression of Granular Media.” Journal of Geotechnical Engineering, 119(1), 1–18.CrossRefGoogle Scholar
  18. Hong, Z.-S., Yin, J., and Cui, Y.-J. (2010). “Compression behaviour of reconstituted soils at high initial water contents.” Géotechnique, 60(9), 691–700.CrossRefGoogle Scholar
  19. Hong, Z., Tateishi, Y., and Han, J. (2006). “Experimental Study of Macro-and Microbehavior of Natural Diatomite.” Journal of Geotechnical and Geoenvironmental Engineering, 132(5), 603–610.CrossRefGoogle Scholar
  20. Israelachvili, J. N. (2011). Intermolecular and Surface Forces. Elsevier, Waltham, MA.Google Scholar
  21. Lambe, T. W., and Whitman, R. V. (1969). Soil Mechanics. Wiley, New York.Google Scholar
  22. Lee, C., Yun, T. S., Lee, J.-S., Bahk, J. J., and Santamarina, J. C. (2011). “Geotechnical characterization of marine sediments in the Ulleung Basin, East Sea.” Engineering Geology, Elsevier, 117(1–2), 151–158.Google Scholar
  23. Lee, J. (2014). “Evaluation of Diatomaceous Earth Content in Natural Soils.” University of Wisconsin-Madison.Google Scholar
  24. Leonards, G. A., and Ramiah, B. K. (1960). “Time Effects in the Consolidation of Clays.” American Society of Testing and Materials, STP 254, 116–130.Google Scholar
  25. Locat, J., and Tanaka, H. (2001). “A new class of soils: Fossiliferous soils?” Proceedings of the 15th International Conference on Soil Mechanics and Geotechnical Engineering, Istanbul, Turkey, 2295–2300.Google Scholar
  26. Locat, J., Tanaka, H., Tan, T.-S., Dasari, G. R., and Lee, H. (2003). “Natural Soils: geotechnical behaviour and geological knowledge.” Characterisation and Engineering Properties of Natural Soils, 1, 3–28.Google Scholar
  27. Ma, B., Muhunthan, B., and Xie, X. (2014). “Mechanisms of Quasi-preconsolidation stress development in clays: A rheological model.” Soils and Foundations, Elsevier, 54(3), 439–450.Google Scholar
  28. Maekawa, H., Miyakita, K., and Sekiguchi, H. (1991). “Elasto-Viscoplastic Consolidation of a Diatomaceous Mudstone.” Soils and Foundations, 31(2), 93–107.CrossRefGoogle Scholar
  29. Matsumoto, T., Michi, Y., and Hirano, T. (1995). “Performance of Axially Loaded Steel Pipe Piles Driven in Soft Rock.” Journal of Geotechnical Engineering, 121(4), 305–315.CrossRefGoogle Scholar
  30. Nakata, Y., Hyodo, M., Hyde, A. F. L., Kato, Y., and Murata, H. (2001). “Microscopic Particle Crushing of Sand Subjected to High Pressure One-Dimensional Compression.” Soils and Foundations, 41(1), 69–82.CrossRefGoogle Scholar
  31. Palomino, A. M., Kim, S., Summitt, A., and Fratta, D. (2011). “Impact of diatoms on fabric and chemical stability of diatom-kaolin mixtures.” ApplieCd laSycience, Elsevier B.V., 51(3), 287–294.CrossRefGoogle Scholar
  32. Pearse-Danker, E. (2013). “Liquefaction potential of Rotorua soils.” 19th New Zealand Geotechnical Society Geotechnical Symposium, C. Y. Chin, ed., Queenstown, NZ, 7.Google Scholar
  33. Pittenger, A., Taylor, E., and Bryant, W. R. (1989). “The influence of biogenic silica on the geotechnical stratigraphy of the Vøring Plateau, Norwegian Sea.” Proceedings of the Ocean Drilling Program, Scientific Results, 104(November), 923–940Google Scholar
  34. Roberts, J. E., and de Souza, J. M. (1958). “The compressibility of sands.” Proceedings of the American Society of Testing and Materials, 58, 1269–1277.Google Scholar
  35. Robertson, P. K. (2009). “Interpretation of cone penetration tests - a unified approach.” Canadian Geotechncial Journal, 46, 1337–1355.CrossRefGoogle Scholar
  36. Saldivar, E. E., and Jardine, R. J. (2005). “Application of an effective stress design method concrete piles driven in Mexico City clay.” Canadian Geotechnical Journal, 42(6), 1495–1508.CrossRefGoogle Scholar
  37. Santamarina, J. C., Klein, K. A., and Fam, M. A. (2001). Soils and Waves. J. Wiley & Sons, New York.Google Scholar
  38. Santamarina, J. C., Klein, K. A., Wang, Y. H., and Prencke, E. (2002). “Specific surface: determination and relevance.” Canadian Geotechnical Journal, 39, 233–241.CrossRefGoogle Scholar
  39. Shiwakoti, D. R., Tanaka, H., Tanaka, M., and Locat, J. (2002). “Influences of Diatom Microfossils on Engineering Properties of Soils.” Soils and Foundations, 42(3), 1–17.CrossRefGoogle Scholar
  40. Simpson, D. C., and Evans, T. M. (2016). “Behavioral thresholds in mixtures of sand and kaolinite clay.” Journal of Geotechnical and Geoenvironmental Engineering, American Society of Civil Engineers, 142(2), 4015073.Google Scholar
  41. Sonyok, D. R. (2015). “Effect of Diatoms on Index Properties, Compressibility, Suction, and Stiffness of Diatomite-Kaolin Mixtures.” Ph.D. thesis, New Mexico State University, Las Cruces, NM.Google Scholar
  42. Tanaka, H., and Locat, J. (1999). “A microstructural investigation of Osaka Bay clay: the impact of microfossils on its mechanical behaviour.” Canadian Geotechnical Journal, 36, 493–508.CrossRefGoogle Scholar
  43. Vera-Grunauer, X. (2014). “Seismic Response of a Soft, High Plasticity, Diatomaceous Naturally Cemented Clay Deposit.” University of California, Berkeley.Google Scholar
  44. Verdugo, R. (2008). “Singularities of Geotechnical Properties of Complex Soils in Seismic Regions.” Journal of Geotechnical and Geoenvironmental Engineering, 134(July), 982–991.CrossRefGoogle Scholar
  45. Wiemer, G., Dziadek, R., and Kopf, A. (2017). “The enigmatic consolidation of diatomaceous sediment.” Marine Geology, Elsevier B.V., 385, 173–184.CrossRefGoogle Scholar
  46. Wiemer, G., and Kopf, A. (2017). “Influence of diatommicrofossils on sediment shear strength and slope stability.” Geochemistry Geophysics Geosystems, 18(1), 2825–2834.CrossRefGoogle Scholar
  47. Yamamuro, J. A., Bopp, P. A., and Lade, P. V. (1996). “One-Dimensional Compression of Sands at High Pressures.” Journal of Geotechnical Engineering, 122(2), 147–154.CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2020

Authors and Affiliations

  1. 1.Oregon State UniversityCorvallisUSA
  2. 2.Portland State UniversityPortlandUSA

Personalised recommendations