Advertisement

Shaking table modeling of battered pile’s behavior under seismic loading

  • Alireza Saeedi AzizkandiEmail author
  • Shima Vahidinia
  • Mohammad Eslami
Conference paper
Part of the Lecture Notes in Civil Engineering book series (LNCE, volume 62)

Abstract

Battered piles are widely used in foundations where significant lateral resistance is required. The main demerit of these piles is an excellent stiffness, which causes a significant bending moment at the pile cap connection during earthquake loading. In this experimental study, shaking table tests are performed on 2×2 symmetrical pile groups with different rake angles 0°, 15°, and 25°. The dynamic response of groups subjected to sinusoidal input accelerations is analyzed. The results highlight that battered pile groups experienced smaller cap pile displacements in comparison with vertical groups. In addition, the inclined piles had more considerable lateral stiffness and smaller cap horizontal acceleration than vertical piles. The maximum bending moment, occurred at the pile cap rigid connection, was more significant for inclined pile groups. It can be concluded that in a situation where the “displacement” plays an important role, utilizing battered pile groups is preferable.

Keywords

battered piles dynamic response shaking table test pile foundation 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. Azizkandi, A. S., Baziar, M. H. and Yeznabad, A. F. (2018). 3D Dynamic Finite Element Analyses and 1 g Shaking Table Tests on Seismic Performance of Connected and Nonconnected Piled Raft Foundations. KSCE Journal of Civil Engineering, 22, 1750-1762.CrossRefGoogle Scholar
  2. Association Francaise Genie Parasismique (AFPS). 1990. Recommandations AFPS 90. Presses des Ponts et Chaussées, Paris.Google Scholar
  3. Eurocode (2000). Structures in seismic regions, Part 5: Foundation retaining structures, and geotechnical aspects. Seismic Eurocode EC8, European Committee for Standardization, Brussels, Belgium.Google Scholar
  4. Escoffier, S. (2012). Experimental study of the effect of inclined pile on the seismic behavior of pile group. Soil Dynamics and Earthquake Engineering, 42, 275-291.CrossRefGoogle Scholar
  5. Escoffier, S., Chazelas, J.-L. & Garnier, J. (2008). Centrifuge modelling of raked piles. Bulletin of earthquake engineering, 6, 689.Google Scholar
  6. Gerolymos, N., Giannakou, A., Anastasopoulos, I., & Gazetas, G. (2008). Evidence of beneficial role of inclined piles: observations and summary of numerical analyses. Bulletin of Earthquake Engineering, 6(4), 705-722.Google Scholar
  7. Goit, C. S. & Saitoh, M. (2014). Model tests on horizontal impedance functions of fixed-head inclined pile groups under soil nonlinearity. Journal of Geotechnical and Geoenvironmental Engineering, 140, 04014023.Google Scholar
  8. Iai, S., Tobita, T. & Nakahara, T. (2005). Generalised scaling relations for dynamic centrifuge tests. Geotechnique, 55, 355-362.Google Scholar
  9. Li, Z., Escoffier, S. & Kotronis, P. (2016a). Centrifuge modeling of batter pile foundations under earthquake excitation. Soil Dynamics and Earthquake Engineering, 88, 176-190.Google Scholar
  10. Li, Z., Escoffier, S. & Kotronis, P. (2016b). Centrifuge modeling of batter pile foundations under sinusoidal dynamic excitation. Bulletin of Earthquake Engineering, 14, 673-697.Google Scholar
  11. McVay, M. C., Shang, T.-I. & Casper, R. (1996). Centrifuge testing of fixed-head laterally loaded battered and plumb pile groups in sand. Geotechnical Testing Journal, 19, 41-50.Google Scholar
  12. Medina, C., Padrón, L. A., Aznárez, J. J., Santana, A., & Maeso, O. (2014). Kinematic interaction factors of deep foundations with inclined piles. Earthquake Engineering & Structural Dynamics, 43, 2035-2050.Google Scholar
  13. Meyerhof, G. & Ranjan, G. (1973a). The bearing capacity of rigid piles under inclined loads in sand. II: Batter piles. Canadian Geotechnical Journal, 10, 71-85.Google Scholar
  14. Meyerhof, G. & Ranjan, G. (1973b). The bearing capacity of rigid piles under inclined loads in sand. III: Pile groups. Canadian Geotechnical Journal, 10, 428-438.Google Scholar
  15. Meyerhof, G. & Yalcin, A. (1993). Behavior of flexible batter piles under inclined loads in layered soil. Canadian Geotechnical Journal, 30, 247-256.Google Scholar
  16. Meyerhof, G. & Yalcin, A. (1994). Bearing capacity of flexible batter piles under eccentric and inclined, loads in layered soil. Canadian Geotechnical Journal, 31, 583-590.Google Scholar
  17. Pinto, P., McVay, M., Hoit, M. & Lai, P. (1997). Centrifuge testing of plumb and battered pile groups in sand. Transportation Research Record: Journal of the Transportation Research Board, 8-16.Google Scholar
  18. Ravazi, S., Fakher, A. & Mirghaderi, S. R. (2007) An insight into the bad reputation of batter piles in seismic performance of wharves. 4th international conference on earthquake geotechnical engineering, Thessaloniki, June, 2007.Google Scholar
  19. Zhang, L., McVay, M. C. & Lai, P. W. (1999). Centrifuge modelling of laterally loaded single battered piles in sands. Canadian Geotechnical Journal, 36, 1074-1084.Google Scholar
  20. Sarkar, R., Roy, N. & Serawat, A. (2018). A Three Dimensional Comparative Study of Seismic Behavior of Vertical and Batter Pile Groups. Geotechnical and Geological Engineering, 1-19.Google Scholar
  21. Subramanian, R. & Boominathan, A. (2016). Dynamic experimental studies on lateral behavior of batter piles in soft clay. International Journal of Geotechnical Engineering, 10, 317-327.Google Scholar
  22. Tazoh, T., Sato, M., Jang, J., Taji, Y., Gazetas, G. & Anastasopoulos, I. (2009). Kinematic response of batter pile foundation: Centrifuge tests. Proc., 3rd Greece-Japan Workshop “Seismic Design, Observation, and Retrofit of Foundations, 2009. Laboratory of Soil Mechanics, National Technical Univ. of Athens, Greece, 20-35.Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2020

Authors and Affiliations

  • Alireza Saeedi Azizkandi
    • 1
    Email author
  • Shima Vahidinia
    • 1
  • Mohammad Eslami
    • 1
  1. 1.Iran university of science and technologyTehranIran

Personalised recommendations