Advertisement

Design and Fabrication of Four-Way Multi-hacksaw Cutting Machine

  • Anupoju Sai Vamsi
  • Chiranjeeva Rao SeelaEmail author
  • Arnipalli Naveen
Conference paper
  • 40 Downloads
Part of the Smart Innovation, Systems and Technologies book series (SIST, volume 169)

Abstract

In the scenario, for cutting pipes, more human effort is required and the time consumption is more. So, in order to minimize the time and labour, in this work, efforts are made to design and fabricate a four-way multi-hacksaw cutting machine. The main objective of the work is to design an efficient four-way multi-hacksaw cutting machine which suits the industrial applications like cutting thin metal bars, wood, PVC pipes, etc. The machine is designed and fabricated using the principle of slider-crank mechanism, where the slider is replaced with hacksaw. Here, a disc-type crank operates the hacksaw cutter to reciprocate in the guideway to ensure the cutting operation. The size and shape of the machine were finalized by considering the proper design and kinematic analysis. Also, the project is aimed to prepare a machine with less vibration, easy in operation and easy in mobility. The suggested machine with eight simultaneously cuts can improve the rate of cutting.

Keywords

Hacksaw Slider-crank mechanism Connecting rod Guideways Design analysis and kinematic analysis 

References

  1. 1.
    Patil, D., Raut, S., Jadhav, S., Kulkarni, G., Shinde.: Optimization and development of multi-way hacksaw machine. Int. J. Res. Sci. Eng. 2(3), 799–804 (2016)Google Scholar
  2. 2.
    Subash, R., Meenakshi, C.M., Jayakaran, K.S., Venkateswaran, C., Sasidharan, R.: Fabrication of pedal powered hacksaw using dual chain drive. Int. J. Eng. Technol. 3(2), 220–223 (2014)Google Scholar
  3. 3.
    Vinod Babu, C., Chiranjeeva Rao, S., Vykunta Rao, M.: Modal and static analysis of automotive chassis frame by using FEA. Int. J. Appl. Eng. Res. 10(20), 19775–19777 (2015)Google Scholar
  4. 4.
    Vinod Babu, C., Chiranjeeva Rao, S., VykuntaRao, M.: Structural analysis of Eicher 11.10 chassis frame. Int. J. Eng. Trends Technol. 22(7), 315–319 (2015)Google Scholar
  5. 5.
    Rao, P.K.V.: Fabrication of hacksaw cutter using slider cranks mechanism. Int. J. Eng. Trends Technol. 6(3), 10–19 (2016)Google Scholar
  6. 6.
    Biswasa, A., Salunkeb, A., Patilc, A., Patil, D.: A review on multiway hacksaw machine. Int. J. Innov. Emerg. Res. Engineering. 4(3), 92–96 (2017)Google Scholar
  7. 7.
    Josh, T.: Automated double hacksaw cutter. Int. J. Eng. Res. Technol. 7(7), 49–56 (2018)Google Scholar
  8. 8.
    Mates: Design and fabrication of fourway hacksaw machine. Int. J. Civ., Mech. Energy Sci. 1, 5–8 (2017)Google Scholar
  9. 9.
    Satishkumar, S.S., Senapati, A.K., Pal, S.K., Mohanty, S.: Fabrication of two-way pedal powered hacksaw machine. Int. J. Innov. Sci. Eng. Technol. 3(3), 683–687 (2016)Google Scholar
  10. 10.
    Vykunta Rao, M., Chiranjeeva Rao, S., Vinod Babu, C., Sekhar Babu, M.V.: Influence of reinforced particles on the mechanical properties of aluminium based metal matrix composite—a review. Chem. Sci. Rev. Lett. 4(13), 335–341 (2015)Google Scholar
  11. 11.
    VenkataRao, D., Prasad Rao, K., Chiranjeeva Rao, S., Umamaheswara Rao, R.: Design and fabrication of power generation system using speed breaker. Int. J. Curr. Eng. Technol. 4(4), 2697–2702 (2014)Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2020

Authors and Affiliations

  • Anupoju Sai Vamsi
    • 1
  • Chiranjeeva Rao Seela
    • 1
    Email author
  • Arnipalli Naveen
    • 1
  1. 1.Department of Mechanical EngineeringGMRITRajamIndia

Personalised recommendations