Advertisement

Synthesis and Characterization of Functionally Graded Ceramic Material for Aerospace Applications

  • M. Jeshrun Shalem
  • A. DevarajuEmail author
  • K. Karthik
Conference paper
  • 32 Downloads
Part of the Smart Innovation, Systems and Technologies book series (SIST, volume 169)

Abstract

The aim of this research work is to study the density and dielectric properties of the functionally graded ceramic material with fused silica. The low density and low dielectric properties of this material made it use in the aerospace applications significantly such as, radomes which are used in protecting the radar antenna from high temperature and typical environmental conditions. The fused silica samples are produced by slip casting process with uniform density and sintered up to high temperatures to achieve desired strength, density and the dielectric properties. It has been observed that the properties have shown significant change with the change in time and temperature of the sintering process.

Keywords

Functionally graded ceramics (FGCs) Radome Fused silica Density Dielectric constant Slip casting Sintering 

Notes

Acknowledgements

The authors would like to thank Mr. K. KARTHIK (external guide DRDL-HYD) for his continuous support in sharing the knowledge about the project. The authors are thankful to the Management of SR Engineering College, Warangal, for the support and the laboratory facilities provided for the project work.

References

  1. 1.
    Wahab, M.: Indonesian Institute of Sciences—radar radome and its design considerations. In: Conference paper December 2009.  https://doi.org/10.1109/icici-bme.2009.5417229.·Source: IEEE Xplore
  2. 2.
    Besisa, D.H.A., Ewais, E.M.M.: Advances in functionally graded ceramics—processing, sintering properties and applications. In: Advances in Functionally Graded Materials and Structures, pp. 1–32. Intech Open, Published on: 2016-03-31Google Scholar
  3. 3.
    Saiyathibrahim, A., Mohamed, N.S.S., Dhanapal, P.: Processing techniques of functionally graded materials—a review. In: International Conference on Systems, Science, Control, Communication, Engineering and Technology, pp. 98–105 (2015)Google Scholar
  4. 4.
    Nemat-Alla, M.M., Ata, M.H., Bayoumi, M.R., Khair-Eldeen, W.: Powder metallurgical fabrication and microstructural investigations of aluminum/steel functionally graded material. Mater. Sci. Appl. 2, 1708–1718 (2011)Google Scholar
  5. 5.
    Mahamood, R.M., Akinlabi, E.T., Shukla, M., Pityana, S.: Functionally graded material: an overview, July 4–6 (2012)Google Scholar
  6. 6.
    Xu, J., Zhu, D., Luo, F., Zhou, W., Li, P.: Dielectric properties of porous reaction-boned Si3N4 ceramics with controlled porosity and pore size. J. Mater. Sci. Technol. 24(2), 207–210 (2008)Google Scholar
  7. 7.
    Miao, X.G., Qu, Y.R., Ghezzo, F., Fang, X.W., Yue, Y.T., Zhao, Z.Y., Liu, R.P.: Fused silica ceramics and composites for radome applications. Adv. Mater. Res. Trans. Tech. Publ. 900, 123–129 (2014)Google Scholar
  8. 8.
    Nishimura, T., Xu, X., Kimoto, K., Hirosaki, N., Tanaka, H.: Fabrication of Silicon Nitride Nanoceramics—Powder Preparation and Sintering: A Review, pp. 19 (2007)Google Scholar
  9. 9.
    Bellosi, A., Monteverde, F., Melandri, C., Gucciardi, S.: Sintering Behaviour, Microstructure and Properties of Fine Silicon Nitride (1998)Google Scholar
  10. 10.
    Petrus, M., Wozniak, J., Cygan, T., Adamczyk-Cieslak, B., Kostecki, M., Olszyna, A.: Sintering behaviour of silicon carbide matrix composites reinforced with multilayer graphene (2017)Google Scholar
  11. 11.
    Ganesh, I.: Centre of Excellence for Advanced Ceramics, International Advanced Research Centre for Powder Metallurgy and New Materials (ARCI), Hyderabad 500 005, India–Novel composites of β-SiAlON and radome manufacturing technology developed at ARCI, Hyderabad, for hypervelocity vehicles (2017)Google Scholar
  12. 12.
    Saeedi Heydaria, M., Ghezavatib, J., Abbasgholipourc, M., Mohammadi Alasti, B.: Various types of ceramics used in radome: a review (2016)Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2020

Authors and Affiliations

  1. 1.Department of Mechanical EngineeringS R Engineering CollegeWarangal UrbanIndia
  2. 2.DRDLHyderabadIndia

Personalised recommendations