Advertisement

Design and Implementation of Product Embodied Riser for Energy Conservation in an Aluminum Casting Process

  • K. Prabhuram
  • V. Subrammaniyan
  • M. ThenarasuEmail author
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

Traditionally in the foundry industrial practices, after the casting process is done, the runner and the riser are removed and reused to manufacture new components by re-melting them. This paper suggests an idea to design the riser in order to form a by-product of a desired shape on solidification so that the energy spent on re-melting these riser components is cut down. In this method, the solid riser obtained after solidification of the casting is used as a raw material or a semi-finished product and subjected to other processes without forming further cast products by re-melting it. The casting method adopted to experimentally verify the claim is green sand mold casting method to cast a cuboid pattern of cast aluminum grade LM4. A simple geometry of a cylinder of diameter 35 mm was chosen as the riser geometry and the mold was designed to house the actual product of a cuboid and the by-product as the cylinder. The results of this experiment confirm that 23.54% of energy conservation is achieved by the implementation of this method. The last section of this paper provides insights on the environmental impact of this method when adopted and applied to the foundry industries on a global scale. Since this method brings down the energy requirements of the casting industries, it highly benefits the industry in both economic and environmental aspects. This validates the need for innovation in the designing of newer manufacturing concepts to end up beneficial to the world.

Keywords

Optimal riser design Energy conservation Metal casting Product embodied risers Carbon footprint 

References

  1. 1.
    U.S. Department of Energy Office of Industrial Technologies: Energy and Environmental Profile of the U.S. Metalcasting Industry https://www.energy.gov/sites/prod/files/2013/11/f4/profile_0.pdf (1999). last accessed 11 Jan 2019
  2. 2.
    Morthland, T.E., Byrne, P.E., Tortorelli, D.A., Dantzig, J.A.: Optimal riser design for metal castings. Metall. Mater. Trans. 26(4), 871–885 (1995)CrossRefGoogle Scholar
  3. 3.
    Tavakoli, R., Davami, P.: Optimal riser design in sand casting process by topology optimization with SIMP method I: poisson approximation of nonlinear heat transfer equation. Struct. Multi. Optim. 36(2), 193–202 (2008)CrossRefGoogle Scholar
  4. 4.
    Laxminarayana, P., Chennakesava Reddy, A.: Design of top risers using parabolic metal flow concept during solidification. In: National Conference on Advanced Materials and Manufacturing Techniques (2004)Google Scholar
  5. 5.
    Mathew, M.M., Thenarasu, M., Aravind, G., Selvaraj, J.: Performance comparison for aluminium, copper and steel shots in waste heat recovery and scrap preheating from solidifying molten metal (2006)Google Scholar
  6. 6.
    Prashanth, M.S., Eshwar, R., Patel, V.K., Selvaraj, J., Rohit, R., Rahul, R., Menon, G.K.: A multi faceted approach to energy conservation in foundries. Procedia Eng. 97, 1815–1824 (2014)CrossRefGoogle Scholar
  7. 7.
    Thollander, P., Backlund, S., Trianni, A., Cagno, E.: Beyond barriers–a case study on driving forces for improved energy efficiency in the foundry industries in Finland, France, Germany, Italy, Poland, Spain, and Sweden. Appl. Energy 111, 636–643 (2013)CrossRefGoogle Scholar
  8. 8.
    Kalpakjian, S., Vijai Sekar, K.S., Schmid, S.R.: Manufacturing Engineering and Technology, 7th edn. Pearson (2014)Google Scholar
  9. 9.
    Srinivasan, K., Siddharth, C.S.K., Arun Kaarthic, L.V., Thenarasu, M.: Evaluation of mechanical properties, economic and environmental benefits of partially replacing silica sand with biomass ash for aluminium casting. Mater. Today Proc. 5(5), 12984–12992 (2018)Google Scholar
  10. 10.
    Aluminium Gutters & Rainwater Pipe Fittings, Hall and Botterill. https://www.gutter.co.uk/ (2014)
  11. 11.
    Sun, H.-C., Chao, L.-S.: An investigation into the effective heat transfer coefficient in the casting of aluminum in a green-sand mold. Mater. Trans. 50(6), 1396–1403 (2009)CrossRefGoogle Scholar
  12. 12.
    Sui, D.-S., Cui, Z.-S..: Regularized determination of interfacial heat transfer coefficient during ZL102 solidification process. Trans. Nonferrous Met. Soc. China 18(2), 399–404 (2008)CrossRefGoogle Scholar
  13. 13.
    Arasu, M., Rogers Jeffrey, L.: Energy consumption studies in cast iron foundries. In: Transactions of 57th Indian Foundry Congress, Kolkata, India (2009)Google Scholar
  14. 14.
    Milkereit, B., Kessler, O., Schick, C.: Determination of critical cooling rate for hardening aluminum alloys using HyperDSC. In: Application Note-Differential Scanning Calorimetry application (2010)Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2020

Authors and Affiliations

  1. 1.Department of Mechanical Engineering, Amrita School of EngineeringAmrita Vishwa VidyapeethamCoimbatoreIndia

Personalised recommendations