Advertisement

Studies on Application and Mechanism of Self-Healing Polymer and Nanocomposite Materials

  • S. Sreenatha Reddy
  • Rajagopal Dhanasekaran
  • Sujeet KumarEmail author
  • Shiv Shankar Kanwar
  • R. Shruthi
  • T. Navaneetha
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

From the last few decades, self-healing techniques came into existence which has wide applications in the aerospace, automobile industries, biomedicine, etc. The polymers have the ability to repair the damages caused by various actions of impact, fatigue, and erosion and restore the original characteristics of material. Its lightweight, good processability, chemical stability, low cost, and high strength make it smart material. Self-healing is inspired by biological study. There are three main concepts of self-healing: capsule-based self-healing mechanism, vascular self-healing mechanism, and intrinsic self-healing mechanism. The aim of this article is to give a complete idea about the application and mechanism of self-healing polymers and its nanocomposites. Impact damages, fatigue, puncture, and corrosion are reviewed by this article. Safer, long-lasting, and economical products can be produced using self-healing polymers. Finally, this article wraps up with great scope in research and developments. Sources of information were from scientific articles, patents, and different materials.

Keywords

Self-healing material Fatigue Nanocomposites Capsule Vascular mechanism 

References

  1. 1.
    Blaiszik BJ, Kramer SLB, Olugebefola SC, Moore JS, Sottos NR, White SR (2010) Self-healing polymers and composites. Annu Rev Mater Res 40:179–211CrossRefGoogle Scholar
  2. 2.
    White SR, Sottos NR, Geubelle PH, Moore JS, Kessler MR (2001) Autonomic healing of polymer composites. Nat Int J Sci 409:794–797Google Scholar
  3. 3.
    Varghese S, Lele A, Mashelkar R (2006) Metal-ion mediated healing of gels. J Polym Sci, Part A: Polym Chem 44(1):666–670CrossRefGoogle Scholar
  4. 4.
    van der Zwaag S (2007) An introduction to materials design principles: damages prevention versus damage management. In: Self healing material. Springer, AA Dordrecht, The Netherlands, pp 2–9Google Scholar
  5. 5.
    Toohey Kathleen S, Sottos Nancy R, Lewis Jennifer A, Moore Jeffrey S, White Scott R (2007) Self-healing materials with microvascular networks. Nat Mater 6(8):581–585CrossRefGoogle Scholar
  6. 6.
    Hia IL, Vahedi V, Pasbakhsh P (2016) Self-healing polymer composites: prospects, challenges, and applications. Polym Rev 56:225–261CrossRefGoogle Scholar
  7. 7.
    Dry C, Sottos NR (1993) Passive smart self-repair in polymer matrix composite materials. In: Proceedings of SPIE: society of photo-optical instrumentation engineers, vol 1916, pp 437–444Google Scholar
  8. 8.
    Aıssa BA, Therriault D, Haddad E, Jamroz W (2012) Self-healing materials systems: overview of major approaches and recent developed technologies. Adv Mater Sci Eng 17:854203Google Scholar
  9. 9.
    Brown EN, White SR, Sottosa NR (2004) SEM X international national conferenceGoogle Scholar
  10. 10.
    Brown EN, White SR, Sottos NR, Mater J (2006) Fatigue crack propagation in microcapsule. J Mater Sci 41(19):6266–6273CrossRefGoogle Scholar
  11. 11.
    Asua JM (2002) Miniemulsion polmerisation. Prog Polmer Sci 27:1283–1346CrossRefGoogle Scholar
  12. 12.
    Williams GJ, Bond IP, Trask RS (2009) Compression after impact assessment of self-healing CFRP. Compos Part A—Appl Sci Manuf 40(9):1399–1406CrossRefGoogle Scholar
  13. 13.
    Hamilton AR, Sottos NR, White SR (2010) Self-healing of internal damage in synthetic vascular materials. Adv Mater 22(45):5159–5163CrossRefGoogle Scholar
  14. 14.
    Norris CJ, Bond IP, Trask RS (2011) Interactions between propagating cracks and bioinspired self-healing vascules embedded in glass fibre reinforced composites. Compos Sci Technol 71(6):847–853CrossRefGoogle Scholar
  15. 15.
    Peterson AM, Kotthapalli H, Rahmathullah MAM, Palmese GR (2012) Investigation of interpenetrating polymer networks for self-healing applications. Compos Sci Technol 72(2):330–336CrossRefGoogle Scholar
  16. 16.
    Grunenfelder LK, Suksangpanya N, Salinas C, Milliron G, Yaraghi N, Herrera S et al (2014) Bio-inspired impact-resistant composites. Acta Biomaterilia 10(9):3997–4008CrossRefGoogle Scholar
  17. 17.
    Esser-Kahn AP, Thakre PR, Dong H, Patrick JF, Vlasko-Vlasov VK, Sottos NR et al (2011) Three-dimensional microvascular fiber-reinforced composites. Adv Mater 23(32):3654–3658CrossRefGoogle Scholar
  18. 18.
    Yang T, Wang CH, Zhang J, He S, Mouritz AP (2012) Toughening and self-healing of epoxy matrix laminates using mendable polymer stitching. Compos Sci Technol 72(12):1396–1401CrossRefGoogle Scholar
  19. 19.
    Koralagundi Matt AK, Strong S, ElGammal T, Amano RS (2015) Development of novel self-healing polymer composites for use in wind turbine blades. J Energy Resour Technolology 137(5):051202CrossRefGoogle Scholar
  20. 20.
    Wang Y, Pham DT, Ji C (2015) Self-healing composites: a review. Cogent Eng 2:1075686CrossRefGoogle Scholar
  21. 21.
    Chung CM, Roh YS, Cho SY, Kim JG (2004) Crack healing in polymeric materials via photochemical [2+2] cycloaddition. Chem Mater 16(21):3982–3984CrossRefGoogle Scholar
  22. 22.
    Scott TF, Schneider AD, Cook WD, Bowman CN (2005) Photoinduced plasticity in cross-linked polymers. Science 308(5728):1615–1617CrossRefGoogle Scholar
  23. 23.
    Ghosh B, Urban MW (2009) Self-repairing oxetane-substituted chitosan polyurethane networks. Science 323(5920):1458–1460CrossRefGoogle Scholar
  24. 24.
    Burnworth M, Tang I, Kumpfer JR, Duncan AJ, Beyer FL, Fiore GI, Rowan SJ, Weder C (2011) Optically healable supramolecular polymers. Nature 472(7343):334–337CrossRefGoogle Scholar
  25. 25.
    Vogt AP, Sumerlin BS (2009) Temperature and redox responsive hydrogels from ABA triblock copolymers prepared by RAFT polymerization. Soft Matter 5(12):2347–2351CrossRefGoogle Scholar
  26. 26.
    Van Der Zwaag S, Grande AM, Post W, Garcia SJ, Bor TC (2014) Review of current strategies to induce self-healing behaviour in fibre reinforced polymer based composites. Mater Sci Technol 30(13a):1633–1641CrossRefGoogle Scholar
  27. 27.
    Murphy EB (2011) The return of photoelastic stress measurements: utilizing birefringence to monitor damage and repair in healable materials. J Mater Chem 21(5):1438–1446CrossRefGoogle Scholar
  28. 28.
    Maes F, Montarnal D, Cantournet S, Tournilhac F, Corte L, Leibler L (2012) Activation and deactivation of self-healing in supramolecular rubbers. Soft Matter 8(5):1681–1687CrossRefGoogle Scholar
  29. 29.
    Brown EN, White SR, Sottos NR (2005) Retardation and repair of fatigue cracks in a microcapsule toughened epoxy composite-Part II: In situ self-healing. Compos Sci Technol 65:2474–2480CrossRefGoogle Scholar
  30. 30.
    Zako M, Takano N (1999) Intelligent material systems using epoxy particles to repair microcracks and delamination damage in GFRP. J Intell Mater Syst Struct 10(10):836–841CrossRefGoogle Scholar
  31. 31.
    Brown Eric N, Moore Jeffrey S, White Scott R, Sottos Nancy R (2003) Fracture and fatigue behavior of a self-healing polymer composite. Mater Res Soc Symp Proc 735:101–106Google Scholar
  32. 32.
    Brown EN, White SR, Sottos NR (2005) Retardation and repair of fatigue cracks in a microcapsule toughened epoxy composite-part II: in situ self healing. Compos Sci Technol 65(15–16):2474–2480CrossRefGoogle Scholar
  33. 33.
    Luo X (2013) Shape memory assisted self-healing coating. ACS Publ 2(2):152–156Google Scholar
  34. 34.
    Yabuki A (2015) Self-healing coatings for corrosion inhibition of metals. Mod Appl Sci 9(7):215CrossRefGoogle Scholar
  35. 35.
    Keller MW, Hampton K, McLaury B (2013) Self-healing of erosion damage in a polymer coating. Wear 307(1–2):218–225CrossRefGoogle Scholar
  36. 36.
    Cho SH, White SR (2009) Braun PV (2009) Self-healing polymer coatings. Adv Mater 21:645–649CrossRefGoogle Scholar
  37. 37.

Copyright information

© Springer Nature Singapore Pte Ltd. 2020

Authors and Affiliations

  • S. Sreenatha Reddy
    • 1
  • Rajagopal Dhanasekaran
    • 1
  • Sujeet Kumar
    • 1
    Email author
  • Shiv Shankar Kanwar
    • 1
  • R. Shruthi
    • 1
  • T. Navaneetha
    • 1
  1. 1.Department of Mechanical EngineeringGuru Nanak Institute of TechnologyHyderabadIndia

Personalised recommendations