Advertisement

Waste Coal Utilization in India: A Review

  • Krishna Kant DwivediEmail author
  • Prabhansu
  • M. K. Karmakar
  • A. K. Pramanick
  • P. K. Chatterjee
Chapter
  • 23 Downloads

Abstract

Waste coal production is an important worldwide issue, especially in India. Indian waste coal has great importance due to the increase of production in latest years. With the increasing demand of high-quality coal, waste category coals also can be used for combustion and chemical production. Indian waste coal is usually featured with high moisture content, high ash content and low carbon content, which especially exhibits high volatile and low heating value. The physio-chemical analysis (proximate and ultimate analysis) of Indian waste coal were carried out as per ASTM-D 5373 and results shows that the volatile matter, fixed carbon, ash contents and moisture contents are in the range of (14–16%), (5–8%), (73–79%) and (2–3%), respectively, with a moderate amount of carbon contents (10–15%). The present review article provides a comprehensive overview of the various thermal treatments and advanced technologies, characterization of Indian waste coal (proximate and ultimate analysis) for the possibility of using waste category coal as a fuel. The review starts from basic aspects of the process such as important operating parameters than focus on comparative analysis of the utilization of Indian waste coal with their characterization and the environmental performances of different fluidized-bed gasifiers. The analysis indicates that gasification and pyrolysis are technically viable option for the waste conversion. The advantages in terms of utilization of Indian waste coal are also covered in detail and shows that Indian waste coal could be an effective energy source that will not only contribute to reuse the waste materials but also reduces waste disposal landfills.

Keywords

Waste coal Pyrolysis Gasification Thermo-chemical conversion Circulating fluidized bed 

Notes

Acknowledgements

The authors sincerely express their thanks to the Director, NIT Durgapur and Director, CSIR-CMERI, Durgapur for their support.

References

  1. Belgiorno, V., Feo, G., Rocca, C., & Napoli, R. (2003). Energy from gasification of solid wastes. Waste Management, 23, 1–15.CrossRefGoogle Scholar
  2. Dwivedi, K. K., Chatterjee, P. K., Karmakar, M. K., & Pramanick, A. K. (2018). Experimental study on pyrolysis of coal by thermo gravimetric analysis (TGA) under different temperature conditions. Journal of Energy and Environmental Sustainability, 5, 49–52.Google Scholar
  3. Idris, S., Rahman, N. A., Ismail, K., Alias, A. B., Rashid, Z. A., & Aris, M. J. (2010). Investigation on thermochemical behaviour of low rank Malaysian coal, oil palm biomass and their blends during pyrolysis via thermo gravimetric analysis (TGA). Bioresource Technology, 101, 4584–4592.CrossRefGoogle Scholar
  4. Koukouzas, N., Katsiadakis, A., Karlopoulos, E., & Kakaras, E. (2008). Co-gasification of solid waste and lignite—A case study for Western Macedonia. Waste Management, 28, 1263–1275.CrossRefGoogle Scholar
  5. Liu, Z., Lin, C., Chang, T., & Weng, W. (2016). Waste-gasification efficiency of a two-stage fluidized-bed gasification system. Waste Management, 48, 250–256.CrossRefGoogle Scholar
  6. Mondal, S., Mondal, A. K., Chintala, V., Tauseef, S. M., & Pandey, J. K. (2018). Thermochemical pyrolysis of biomass using solar energy for efficient biofuel production: a review. Biofuels.  https://doi.org/10.1080/17597269.2018.1461512.CrossRefGoogle Scholar
  7. Morris, M., Waldheim, L. (1998). Energy recovery from solid waste fuels using advanced gasification technology. Waste Management 18, 557±564.Google Scholar
  8. Pan, Y. G., Velo, E., Roca, X., Manya, J. J., & Puigjaner, L. (2000). Fluidized-bed co-gasification of residual biomass/poor coal blends for fuel gas production. Fuel, 79, 1317–1326.CrossRefGoogle Scholar
  9. Saini, M. K., & Srivastava, P. K. (2017). Effect of coal cleaning on ash composition and its fusion characteristics for a high-ash non-coking coal of India. International Journal of Coal Preparation and Utilization, 37, 1–11.CrossRefGoogle Scholar
  10. Shehzad, A., Bashir, J. K., & Sethupathi, S. (2016). System analysis for synthesis gas (syngas) production in Pakistan from municipal solid waste gasification using a circulating fluidized bed gasifier. Renewable and Sustainable Energy Reviews, 60, 1302–1311.CrossRefGoogle Scholar
  11. Tanigaki, N., Manako, K., & Osada, M. (2012). Co-gasification of municipal solid waste and material recovery in a large-scale gasification and melting system. Waste Management, 32, 667–675.CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2020

Authors and Affiliations

  • Krishna Kant Dwivedi
    • 1
    Email author
  • Prabhansu
    • 2
  • M. K. Karmakar
    • 3
  • A. K. Pramanick
    • 1
  • P. K. Chatterjee
    • 3
  1. 1.Department of Mechanical EngineeringNational Institute of TechnologyDurgapurIndia
  2. 2.Department of Mechanical EngineeringMuzaffarpur Institute of TechnologyMuzaffarpurIndia
  3. 3.Energy Research and Technology GroupCSIR-Central Mechanical Engineering Research InstituteDurgapurIndia

Personalised recommendations