Advertisement

Optical Diagnostics of Spray Development in Diesel Engines

  • Ashutosh JenaEmail author
Chapter
Part of the Energy, Environment, and Sustainability book series (ENENSU)

Abstract

In order to comply with the current and future emission norms applicable to diesel engines, understanding the fuel-air mixing phenomena in depth is quite crucial. Fuel spray inside the cylinder of an engine in operation interacts with in-cylinder gases as well as with solid boundaries. Fuel spray impinging on the cylinder wall and piston top, may subsequently enhance soot formation and hence, study and analysis of fuel spary characteristics can help to minimize these effects. However, study of the physics of spray evolvement and dynamics demands advanced diagnostics and numerical techniques. Many attempts have been made in developing computational models for analyzing the fuel-air and fuel-wall interactions. Despite those efforts it remains an exciting area of research to accurately model the spray behavior under dynamic conditions inside the engine cylinder. These models need continuous inputs from experimental studies for validation and for further development purposes. For experimental investigations point of view, several optical methods have been adopted viz. Phase Doppler Interferometry (PDI), Shadowgraphy, Schlieren photography etc. However, deployment of these techniques for acquiring precise and reliable data requires certain expertises. The aim of this chapter is to confine various optical diagnostics techniques applicable to diesel engines. A critical review of these methods has been presented for further advancement in the field.

Keywords

Spray wall impingement Optical diagnosis Diesel engines 

References

  1. Abo-Serie E, Gavaises M, Arcoumanis C (2003) Spray/wall interaction in direct-injection spark ignition engines equipped with multi-hole injectors. In: Proceedings 9th international conference on liquid atomisation and spray systems (ICLASS). Sorrento, p 28Google Scholar
  2. Babu MG, Murthy BS (1976) Simulation and evaluation of exhaust and intake system of a four-stroke spark ignition engine. SAE Technical PaperGoogle Scholar
  3. Bachalo WD (2000) Spray diagnostics for the twenty-first century. At Sprays 10(3–5):439–474CrossRefGoogle Scholar
  4. Benajes J, García-Oliver JM, Novella R, Kolodziej C (2012) Increased particle emissions from early fuel injection timing Diesel low temperature combustion. Fuel 1(94):184–190CrossRefGoogle Scholar
  5. Berggren C, Magnusson T (2012) Reducing automotive emissions—The potentials of combustion engine technologies and the power of policy. Energy Policy 1(41):636–643CrossRefGoogle Scholar
  6. Borman G, Nishiwaki K (1987) Internal-combustion engine heat transfer. Prog Energy Combust Sci 13(1):1–46CrossRefGoogle Scholar
  7. Cardenas M, Pawlowski A, Günther M, Kneer R (2008) Spray-wall interaction of clustered sprays under conditions relevant for diesel engines. ILASSEuropeilasseurope.orgGoogle Scholar
  8. Du W, Zhang Q, Bao W, Lou J (2018) Effects of injection pressure on spray structure after wall impingement. Appl Therm Eng 25(129):1212–1218CrossRefGoogle Scholar
  9. Fang T, Chia-fon FL (2011) Low sooting combustion of narrow-angle wall-guided sprays in an HSDI diesel engine with retarded injection timings. Fuel 90(4):1449–1456CrossRefGoogle Scholar
  10. Hohenberg GF (1979) Advanced approaches for heat transfer calculations. SAE Technical paperGoogle Scholar
  11. Ismael MA, Heikal MR, Baharom MB (2014) Spray-wall impingement of Diesel-CNG dual fuel jet using Schlieren imaging technique. In: MATEC web of conferences 2014, vol 13. EDP Sciences, p 02037Google Scholar
  12. Jia M, Xie M, Stobart R (2009) Evaluation of spray/wall interaction models under the conditions related to diesel HCCI engines. SAE Int J Fuels Lubr 1(1):993–1008CrossRefGoogle Scholar
  13. Kay PJ, Bowen PJ, Gold MR, Sapsford SM (2012) Transient fuel spray impingement at atmospheric and elevated ambient conditions. Exp Fluids 53(4):873–890CrossRefGoogle Scholar
  14. Kitasei T, Yamada J, Shoji T, Shiino S, Mori K (2008) Influence of the different fuel spray wall impingement angles on smoke emission in a DI-diesel engine. SAE Technical PaperGoogle Scholar
  15. Kook S, Park S, Bae C (2007) Influence of early fuel injection timings on premixing and combustion in a diesel engine. Energy Fuels 22(1):331–337CrossRefGoogle Scholar
  16. Mahmud R, Kurisu T, Nishida K, Ogata Y, Kanzaki J, Tadokoro T (2018) Experimental study on flat-wall impinging spray flame and its heat flux on wall under diesel engine–like condition: first report—effect of impingement distance. Proc Inst Mech Eng Part D: J Autom Eng 33(8):2187–2202CrossRefGoogle Scholar
  17. Mathews WS, Lee CF, Peters JE (2013) Experimental investigations of spray/wall impingement. At Sprays 13(2 and 3)Google Scholar
  18. Meingast U, Staudt M, Reichelt L, Renz U, Sommerhoff FA (2000) Analysis of spray/wall interaction under diesel engine conditions. SAE Trans 1:299–312Google Scholar
  19. Musculus MP, Miles PC, Pickett LM (2013) Conceptual models for partially premixed low-temperature diesel combustion. Prog Energy Combust Sci 39(2–3):246–283CrossRefGoogle Scholar
  20. Mwangi JK, Lee WJ, Chang YC, Chen CY, Wang LC (2015) An overview: Energy saving and pollution reduction by using green fuel blends in diesel engines. Appl Energy 1(159):214–236CrossRefGoogle Scholar
  21. Nayak SK, Mishra PC, Parashar SK (2016) Influence of spray characteristics on heat flux in dual phase spray impingement cooling of hot surface. Alex Eng J 55(3):1995–2004CrossRefGoogle Scholar
  22. Nhumaio GC, Watkins AP (2005) Simulation of electrosprays in model direct-injection spark-ignition engine in-cylinder flows. Int J Engine Res 6(6):527–546CrossRefGoogle Scholar
  23. Pan H, Xiao D, Hung D, Xu M, Li X (2019) Experimental investigations of wall jet droplet impact on spray impingement fuel film formation. Fuel 1(241):33–41CrossRefGoogle Scholar
  24. Park SW, Lee CS (2004) Macroscopic and microscopic characteristics of a fuel spray impinged on the wall. Exp Fluids 37(5):745–762CrossRefGoogle Scholar
  25. Pastor JV, Payri R, Garcia-Oliver JM, Nerva JG (2012) Schlieren measurements of the ECN-spray a penetration under inert and reacting conditions. SAE Technical PaperGoogle Scholar
  26. Patel C, Sharma N, Tiwari N, Agarwal AK (2016) Effects of spray droplet size and velocity distributions on emissions from a single cylinder biofuel engine. SAE Technical PaperGoogle Scholar
  27. Payri R, Gimeno J, Bracho G, Vaquerizo D (2016a) Study of liquid and vapor phase behavior on Diesel sprays for heavy duty engine nozzles. Appl Therm Eng 25(107):365–378CrossRefGoogle Scholar
  28. Payri R, Salvador FJ, Manin J, Viera A (2016b) Diesel ignition delay and lift-off length through different methodologies using a multi-hole injector. Appl Energy 15(162):541–550CrossRefGoogle Scholar
  29. Payri R, Viera JP, Pei Y, Som S (2015) Experimental and numerical study of lift-off length and ignition delay of a two-component diesel surrogate. Fuel 15(158):957–967CrossRefGoogle Scholar
  30. Peng Z, Liu B, Wang W, Lu L (2011) CFD investigation into diesel PCCI combustion with optimized fuel injection. Energies 4(3):517–531CrossRefGoogle Scholar
  31. Schulz F, Schmidt J, Kufferath A, Samenfink W (2011) Gasoline wall films and spray/wall interaction analyzed by infrared thermography. SAE Int J Engines 7(3):1165–1177CrossRefGoogle Scholar
  32. Seel K, Reddemann MA, Kneer R (2018) Optical investigation of the interaction of an automotive spray and thin films by utilization of a high-pressure spin coater. Exp Fluids 59(3):50CrossRefGoogle Scholar
  33. Seel K, Reddemann MA, Baltaci T, Kneer R (2015) Impact of lubricating oil films on spray-wall interaction. SAE Technical PaperGoogle Scholar
  34. Serras-Pereira J, Aleiferis PG, Walmsley HL, Davies TJ, Cracknell RF (2013) Heat flux characteristics of spray wall impingement with ethanol, butanol, iso-octane, gasoline and E10 fuels. Int J Heat Fluid Flow 1(44):662–683CrossRefGoogle Scholar
  35. Stanton DW, Lippert AM, Reitz RD, Rutland CJ (1998) Influence of spray-wall interaction and fuel films on cold starting in direct injection diesel engines. SAE Trans 1:1540–1563Google Scholar
  36. Su K (1999) Numerical studies of sprays impacting normally on an infinite plate. At Sprays 9(4)Google Scholar
  37. Tang Q, Liu H, Li M, Yao M (2017) Optical study of spray-wall impingement impact on early-injection gasoline partially premixed combustion at low engine load. Appl Energy 1(185):708–719CrossRefGoogle Scholar
  38. Tropea C (2011) Optical particle characterization in flows. Ann Rev Fluid Mech 21(43):399–426CrossRefGoogle Scholar
  39. Tschöke H, Marohn R (eds) (2017) 10. Tagung Diesel-und Benzindirekteinspritzung 2016: InklusiveGaseinblasung. Springer, BerlinGoogle Scholar
  40. Wang X, Huang Z, Zhang W, Kuti OA, Nishida K (2011) Effects of ultra-high injection pressure and micro-hole nozzle on flame structure and soot formation of impinging diesel spray. Appl Energy 88(5):1620–1628CrossRefGoogle Scholar
  41. Werlberger P, Cartellieri WP (1987) Fuel injection and combustion phenomena in a high speed DI diesel engine observed by means of endoscopic high speed photography. SAE Technical PaperGoogle Scholar
  42. Woschni G (1967) A universally applicable equation for the instantaneous heat transfer coefficient in the internal combustion engine. SAE Technical paperGoogle Scholar
  43. Yao M, Zheng Z, Liu H (2009) Progress and recent trends in homogeneous charge compression ignition (HCCI) engines. Prog Energy Combust Sci 35(5):398–437CrossRefGoogle Scholar
  44. Yu H, Guo Y, Li D, Liang X, Shu GQ, Wang Y, Wang X, Dong L (2015) Numerical investigation of the effect of spray cone angle on mixture formation and CO/Soot emissions in an early injection HCCI diesel engine. SAE Technical PaperGoogle Scholar
  45. Zama Y, Sugawara K, Akop MZ, Furuhata T, Arai M (2014) Experimental study on velocity distribution of postimpingement diesel spray on a wall. Part 1: effect of impingement angle on flow pattern. At Sprays 24(8)Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2020

Authors and Affiliations

  1. 1.Department of Mechanical EngineeringIndian Institute of Technology KanpurKanpurIndia

Personalised recommendations