Advertisement

Tensile Properties of Diffusion Bonded Duplex Stainless Steel to Low Carbon Steel

  • B. A. BaharudinEmail author
  • P. Hussain
  • M. Mustapha
  • F. Ayob
  • A. Ismail
  • F. Ab Rahman
  • P. Z. M. Khalid
  • D. A. Hamid
  • M. A. Rojan
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

The diffusion bonding is one of the methods used to join dissimilar metals. Specimens of duplex stainless steel and low carbon steel were joined by diffusion bonding under varied temperature and holding time. The specimens were clamped using jigs and heated in a furnace. Tensile test was performed on the joined samples. The effect of bonding time and holding temperature on tensile strength and quality of the diffusion bonds were observed. Tensile strength of the joints was examined and the highest tensile strength of 116.12 MPa are obtained at temperatures of 900 °C and holding time of 180 min.

Keywords

Diffusion bonding Duplex stainless steel Dissimilar metals 

Notes

Acknowledgements

The authors thanked both universities; Universiti Teknologi PETRONAS and Universiti Kuala Lumpur for supporting this research work.

References

  1. 1.
    Lucia L, Georgeta A, Icpeca I (2007) Materials bonding by diffusion welding technology. Conferinţa Internaţională, Innovative Technologies For Joinning Advanced Materials, June, Timisoara, Romania, pp 134–139Google Scholar
  2. 2.
    Kundu S, Ghosh S, Laik A (2005) Diffusion bonding of commercially pure titanium to 304 stainless steel using copper interlayer. Mater Sci Eng A 407:154–160CrossRefGoogle Scholar
  3. 3.
    Kundu S, Chartterjee S (2006) Interfacial microstructure and mechanical properties of diffusion bonded titanium–stainless steel joints using a nickel interlayer. Mater Sci Eng A 425:107–113CrossRefGoogle Scholar
  4. 4.
    Vigraman T, Narayanasamy R, Ravindran D (2012) Microstructure and mechanical property evaluation of diffusion-bonded joints made between SAE 2205 steel and AISI 1035 steel. Mater Des 35:156–169CrossRefGoogle Scholar
  5. 5.
    Kundu S, Mishra B, Olson DL, Chatterjee S (2013) Interfacial reactions and strength properties of diffusion bonded joints of Ti64 alloy and 17-4PH stainless steel using nickel alloy interlayer. Mater Des 51:714–722CrossRefGoogle Scholar
  6. 6.
    Vigraman T, Ravindran D, Narayanasamy R (2012) Diffusion bonding of AISI 304L steel to low-carbon steel with AISI 304L steel interlayer. Mater Des 34:594–602CrossRefGoogle Scholar
  7. 7.
    ASTM E8/E8M—Standard test methods for tension testing of metallic materials. No. C. ASTM Int., West Conshohocken, Pennsylvania, USA. 1–27 (2016)Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2020

Authors and Affiliations

  • B. A. Baharudin
    • 1
    Email author
  • P. Hussain
    • 2
  • M. Mustapha
    • 2
  • F. Ayob
    • 1
  • A. Ismail
    • 1
  • F. Ab Rahman
    • 1
  • P. Z. M. Khalid
    • 1
  • D. A. Hamid
    • 3
  • M. A. Rojan
    • 4
  1. 1.Universiti Kuala Lumpur, Malaysian Institute of Marine Engineering TechnologyLumutMalaysia
  2. 2.Department of Mechanical EngineeringUniversiti Teknologi PETRONASSeri IskandarMalaysia
  3. 3.Malaysia Italy Design InstituteUniversiti Kuala LumpurKuala LumpurMalaysia
  4. 4.School of Mechatronic EngineeringUniversiti Malaysia PerlisArauMalaysia

Personalised recommendations