Advertisement

The Optimum Research and Case Study of Wind Power Heating Based on Supply and Demand Load Forecasting

  • Chuankai NiuEmail author
  • Zhengwei Li
  • Renjing Cao
Conference paper
  • 242 Downloads
Part of the Environmental Science and Engineering book series (ESE)

Abstract

Wind power heating is one of the most important methods for reducing the discard wind power. However, one of the key problems is reasonably matching electric power between the output power in a wind farm and building demand heat load, which can improve the economic benefits of the overall project. In this paper, an optimization model includes the wind power prediction model, and demand load model was established, and by which the ratio of discarded wind power was calculated. And under different boundary conditions and optimization objective, the optimal heating area and heat storage tank capacity were obtained. Using this method, a practical project of wind power heating was analyzed in Inner Mongolia Autonomous Region. The analysis result is the ratio of discarded wind reduced to 4.96 % when heating supply using wind power from 14.96% under not heating supply. The annual average of wind farm is raised to 18.47% from 12.51%. This model can improve the efficiency of renewable energy and bring down the ratio of discarded wind, and it can obtain a considerable economic and society benefit.

Keywords

Supply and demand load forecasting Wind power heating The ratio of discarded wind power Economic analysis Case study 

Notes

Acknowledgements

The project is supported by the National Key Research and Development Program of China (Project Number 2017YFC0702900).

References

  1. 1.
    Li, G., Shi, J., Zhou, J.: Bayesian adaptive combination of short-term wind speed forecasts from neural network models. Renew. Energy 36(1), 352–359 (2011)CrossRefGoogle Scholar
  2. 2.
    Cadenas, E., Rivera, W., Campos-Amezcua, R., et al.: Wind speed prediction using a univariate ARIMA model and a multivariate NARX model. Energies 9(2), 109–113 (2016)CrossRefGoogle Scholar
  3. 3.
    Lei, X.: Investigations on short-term reliability prediction models of wind turbines and active power control strategies of wind farms. Dissertation for the doctoral degree in engineering in Chongqing University, Chongqing (2014) (in Chinese)Google Scholar
  4. 4.
    Chitsaz, H., Amjady, N., Zareipour, H.: Wind power forecast using wavelet neural network trained by improved Clonal selection algorithm. Energy Convers. Manage. 89, 588–598 (2015)CrossRefGoogle Scholar
  5. 5.
    Hu, Q., Zhang, R., Zhou, Y.: Transfer learning for short-term wind speed prediction with deep neural networks. Renew. Energy 85(14), 83–95 (2016)CrossRefGoogle Scholar
  6. 6.
    Pei, Z., Wang, C., He, Q., et al.: Analysis and suggestions on renewable energy integration problems in China. Electr. Power 49(11), 1–7 (2016). (in Chinese)MathSciNetGoogle Scholar
  7. 7.
    Xu, X.: Research on accommodating wind power using heating. Dissertation for the master degree in North China Electric Power University, Beijing (2016) (in Chinese)Google Scholar
  8. 8.
    Li, S., Dong, H., Zhang, R., et al.: Multi-source coordination and optimization operation of combined heat and power system considering wind power consumption. Acta Energiae Solaris Sin. 39(8), 2217–2225 (2018). (in Chinese)Google Scholar
  9. 9.
    Yang, X., Lei, X., Ren, J., et al.: Operation model and economic analysis of using curtailed wind power for heat. Distrib. Energy 1(1), 28–32 (2016). (in Chinese)Google Scholar
  10. 10.
    Xu, M., Jiang, D.: Energy efficiency and economic analysis in wind power heating system. Energy China 37(8), 42–47 (2015). (in Chinese)Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2020

Authors and Affiliations

  1. 1.College of Civil EngineeringTongji UniversityShanghaiChina
  2. 2.Ming Yang Smart Energy Group Co., Ltd.ZhongshanChina
  3. 3.College of Mechanical EngineeringTongji UniversityShanghaiChina

Personalised recommendations