Advertisement

Prediction of MRR for VMC Five Axis Machining of D3 Steel Using Desirability Function Approach

  • Arun PatilEmail author
  • Ramesh Rudrapati
Conference paper

Abstract

The optimum selection of machining parameters plays a important role to achieve the desired performance of the machining process at a low cost within short time. Aim of the present research investigation is to develop a mathematical model for predicting material removal rate (MRR) in terms of speed, feed and depth of cut. Experiment are conducted on D3 tool steel material in VMC five axis operation based on the full factorial design. A second order mathematical model in terms of machining parameters and MRR is developed by response surface methodology (RSM). Analysis of variance (ANOVA) technique is utilized to determine the significant process parameters which expected to influence MRR. Contour plots are developed by RSM approach from the mathematical model to study the interaction effects of machining parameters on MRR. Desirability function approach has been applied to solve the mathematical model of MRR to maximize it.

Keywords

Five axis VMC RSM DFA D3 steel MRR 

References

  1. 1.
    Lamikiz, A., De Lacalle, L.N.L., Ocerin, O., Díez, D., Maidagan, E.: The Denavit and Hartenberg approach applied to evaluate the consequences in the tool tip position of geometrical errors in five-axis milling centres. Int. J. Adv. Manuf. Technol. 37, 122–139 (2008)CrossRefGoogle Scholar
  2. 2.
    Rishi, R.S., Singh, M.P., Sanjay, S.: Optimization of machining parameters for minimum surface roughness in end milling. Int. J. Innovative Comput. Sci. Eng. 3(2), 28–34 (2016)Google Scholar
  3. 3.
    Zhang, C.Y., Li, W.D., Jiang, P.Y., Gu, P.H.: Experimental investigation and multi-objective optimization approach for low-carbon milling operation of aluminum. In: Sustainable Manufacturing and Remanufacturing Management (2019).  https://doi.org/10.1007/978-3-319-73488-0_5Google Scholar
  4. 4.
    Rajeswari, B., Amirtha gadeswaran, K.S.: Experimental investigation of machinability characteristics and multi-response optimization of end milling in aluminium composites using RSM based grey relational analysis. Measurement 105, 78–86 (2017)CrossRefGoogle Scholar
  5. 5.
    Gopikrishnan, P., Aalim, A., Asokan, A., Bharath, B., Sumesh, C.S.: Numerical modelling and optimization of surface finish during peripheral milling of AISI 4340 steel using RSM. Mater. Today: Proc. 5(11), 24612–24621 (2018)Google Scholar
  6. 6.
    Riadh, S., Brahim, B.F., Mabrouki, T., Salim, B., Mohamed, A.Y.: Modeling and optimization of the turning parameters of cobalt alloy (Stellite 6) based on RSM and desirability function. Int. J. Adv. Manufact. Technol. (2018).  https://doi.org/10.1007/s00170-018-2816-xCrossRefGoogle Scholar
  7. 7.
    Muhammad, M.L., Khaled, A.E.H.: Modeling and multi-response optimization of cutting parameters in SPDT of a rigid contact lens polymer using RSM and desirability function (2018).  https://doi.org/10.1007/s00170-018-3169-1CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2020

Authors and Affiliations

  1. 1.Department of Mechanical EngineeringJJT UniversityChurelaIndia
  2. 2.Department of Mechanical EngineeringHawassa UniversityHawassaEthiopia

Personalised recommendations