Advertisement

Experimental Study on Infiltration Properties of Pervious Concrete

  • Kanish Kapoor
  • Tanveer Ahmad
  • Gowhar AfzalEmail author
Conference paper
Part of the Lecture Notes in Civil Engineering book series (LNCE, volume 30)

Abstract

The problem of run-off water and water logging is a severe problem in the cities after heavy rainfall. The cities are converting into concrete jungles and the groundwater recharging is decreasing day by day. One of the possible solutions to these problems is the use of pervious concrete either as main pavement or as sidewalks. Pervious is also known as no-fines, gap-graded, zero-slump concrete having 18–35% of void content; thus, it allows water to pass through it. Pervious concrete also reduces the use of extra drainage system in roads and has become the environment-friendly material from other concrete materials as it allows the rainwater to seep into the ground, decreases flooding possibilities especially in metro cities, recharges the groundwater level and enhances freeze and thaw resistance than conventional concrete. The only barrier in using the pervious concrete is its clogging problem, which comes into picture during its age. The objective of the present study is to calculate the infiltration rate of pervious concrete at different clogging percentages.

Keywords

Pervious concrete Porosity Durability Compressive strength Infiltration Urban heat island 

References

  1. Cackler ET et al (2006) Evaluation of US and European concrete pavement noise reduction methods. National Concrete Pavement Technology Center, Concrete Pavement Surface Characteristics Project Report, and Iowa State UniversityGoogle Scholar
  2. Huang B et al (1999) Fundamentals of permeability in asphalt mixtures. J Assoc Asphalt Paving Technol 68:479–500Google Scholar
  3. Jiang Z et al (2005) Effects of some factors on properties of porous pervious concrete. J Build Mater 8:513–519Google Scholar
  4. Kajio S et al (1998) Properties of porous concrete with high strength. In: Proceedings 8th international symposium on concrete roads. Lisbon, pp 171–177Google Scholar
  5. Kardon JB (1997) Polymer-modified concrete: review. ASCE J Mater Civil Eng 9(2):85–91CrossRefGoogle Scholar
  6. Kevern JT (2008) Advancement of pervious concrete durability. Ph.D. dissertation, Iowa State University, Ames, IAGoogle Scholar
  7. Montes F (2006) Pervious concrete: characterization of fundamental properties and simulation of microstructure. Ph.D. Dissertation, University of South CarolinaGoogle Scholar
  8. Nader G, Shivaji D (1995) Development of no-fines concrete pavement applications. ASCE J Transport Eng:283–288Google Scholar
  9. Schaefer VR et al (2006) Mix design development for pervious concrete in cold weather climates. Final report, National Concrete Pavement Technology Center, Iowa State University, and Ames, IAGoogle Scholar
  10. Storm Water Technology Fact Sheet (1999) Porous pavement. EPA 832-F-99-023. Office of Water, Washington, DCGoogle Scholar
  11. Tennis PD et al (2004) Pervious concrete pavements EB302 Portland cement Association Skokie Illinois and National Ready Mixed Concrete Association. Silver Spring, MarylandGoogle Scholar
  12. Wang W (1997) Study of pervious concrete strength. Sci Technol Build Mater China 6(3):25–28Google Scholar
  13. Yang J, Jiang G (2003) Experimental study on properties of pervious concrete pavement materials. Cem Concr Res 33:381–386CrossRefGoogle Scholar
  14. Youngs A (2005) Pervious concrete it’s for real. Presentation at pervious concrete and parking area design workshop, OmahaGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  1. 1.Dr B R Ambedkar National Institute of TechnologyJalandharIndia
  2. 2.Lovely Professional UniversityPhagwaraIndia

Personalised recommendations