Advertisement

Contact Pressure Distribution in Geocell Reinforced Rural Roads

  • Vijay Kumar RayabharapuEmail author
  • Sireesh Saride
Conference paper
Part of the Lecture Notes in Civil Engineering book series (LNCE, volume 29)

Abstract

About 60 and 95% of the road network comprised of rural roads in United States and India, respectively. Everyday rural roads are being constructed by the engineers all around the world to meet the traffic needs, for which, the traditional pavement design and construction practices require high-quality materials for fulfillment of construction standards. Quality materials are unavailable or short of supply in many parts of the world. Design engineers are often forced to seek alternatives using substandard materials, commercial construction aids, and innovative design practices to improve the structural support to the pavement structure when weak subgrades are encountered. In this research, results from a series of large-scale laboratory tests on a simulated rural road consisting of a reinforced and unreinforced dense base/sub-base layer overlying weak subgrade were considered. A series of large-scale laboratory testing were conducted on geocell reinforced rural road under traffic loading conditions. The base/sub-base and weak subgrades were prepared at 75 and 30% relative densities, respectively, by pluviation technic in a large steel tank. An equivalent single axle wheel load (ESAL) of 550 kPa was considered which was applied through a circular steel plate using dynamic hydraulic actuator of 100 kN capacity. Several earth pressure cells were placed at the interface of the dense base/sub-base and weak subgrade layers to measure the contact pressure transmitted on to the weak subgrade. Results indicated that the pressures exerted by the traffic loads can be reduced to about 60% by introducing geocell mattress in base/sub-base layers over weak subgrades.

Keywords

Contact pressure Geocell Rural roads 

Notes

Acknowledgements

The authors would like to express their appreciation to STRATA Geosystems India Pvt. Ltd. for providing the geocell material for this research.

References

  1. Behrens ILC (1999) Overview of low-volume roads. Transportation research record 1652. Transportation Research Board, pp 1–4Google Scholar
  2. Bushman WH, Freeman TE, Hoppe EJ (2005) Stabilization techniques for unpaved roads, vol 1936. Transportation Research Board, pp 28–33Google Scholar
  3. Chummar AV (1972) Bearing capacity theory from experimental results. J Geotech Eng ASCE 98(12):1311–1324Google Scholar
  4. Croft JB (1967) The structures of soils stabilized with cementitious agents. Eng Geol 2(2):63–80CrossRefGoogle Scholar
  5. Dash SK, Krishnaswamy NR, Rajagopal K (2001) Bearing capacity of strip footings supported on geocell-reinforced sand. Geotext Geomembr 19(4):235–256CrossRefGoogle Scholar
  6. Edil TB, Fratta D, Shuettpelz CC (2009) Development of testing methods to determine interaction of geogrid-reinforced granular material for mechanistic pavement analysis. Wisconsin DOT and FHWA project reportGoogle Scholar
  7. Giroud JP, Noiray L (1981) Geotextile-reinforced unpaved road design. J Geotech Eng Div 107(GT9):1233–1254Google Scholar
  8. Han J, Yang XM, Leshchinsky D, Parsons RL (2008) Behavior of geocell-reinforced sand under a vertical load. J Transp Res Board (2045):95–101CrossRefGoogle Scholar
  9. Keller G, Sherar J (2003) Low-volume roads engineering—best management practices field guide. USDA, Forest ServiceGoogle Scholar
  10. Little ND (1995) Stabilization of pavement subgrades and base courses with lime. Kendall/Hunt Publishing Co., Dubuque, IowaGoogle Scholar
  11. Mallick RB, Veeraragava A (2010) Sustainable pavements in India—the time to start is now. New Build Mater Constr World (NBM&CW) Mag 16(3):128–140Google Scholar
  12. Ministry of Road Transport and Highways (MORTH) (2011) Annual report on Indian roads 2010–11. Government of IndiaGoogle Scholar
  13. Muench ST, White GC, Mahoney JP, Pierce LM, Sivaneswaren N (2004) Long-lasting low-volume pavements in Washington state. In: International symposium on design and construction of long lasting asphalt pavements. International Society for Asphalt Pavements, Auburn, AL, pp 729–773Google Scholar
  14. Pinard M (2006) New approaches to sustainable provision of low volume sealed roads. In: International workshop, Bamako, Mali, 18–19 Jan 2006Google Scholar
  15. Pokharel SK (2010) Experimental study on geocell-reinforced bases under static and dynamic loading. Ph.D. thesis, University of Kansas, USAGoogle Scholar
  16. Praticò F, Saride S, Puppala AJ (2011) Comprehensive life cycle cost analysis for the selection of subgrade stabilizers for better performance of low volume roads. Transportation research record 2204, TRB, National Research Council, Washington D.C., pp 120–112Google Scholar
  17. Rayabharapu VK, Saride S (2019) Geocell reinforced dense sand bases overlying weak sand sub-grades under repeated loading. In: Ground improvement techniques and geosynthetics, lecture notes in civil engineering, vol 14. pp 285–294Google Scholar
  18. Saride S, Umashankar B (2010) Towards green pavements in India. In: First US-India workshop on global geoenvironmental engineering challenges, New Delhi, India, 7 Nov 2010Google Scholar
  19. Saride S, Vijay KR, Suraj V, Anand JP (2013) Repeated load tests on geocell reinforced sand subgrades. In: Proceedings of the geosynthetics international conference, Long Beach, CA, vol 3, no 4, pp 537–549Google Scholar
  20. Saride S, Rayabharapu VK, Vedpathak S (2015) Evaluation of rutting behaviour of geocell reinforced sand subgrades under repeated loading. Indian Geotech J 45(4):378–388CrossRefGoogle Scholar
  21. Sitharam TG, Saride S (2005) Behaviour of embedded footings supported on geocell reinforced foundation beds. ASTM Geotech Test J 28:452–463Google Scholar
  22. Webster SL (1979) Investigation of beach and trafficability enhancement using sand-grid confinement and membrane reinforcement concepts. Report GL-79-20, US Army Engineer Waterways Experiment Station, Vicksburg, MS, USAGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  1. 1.Department of Civil EngineeringB V Raju Institute of TechnologyNarsapurIndia
  2. 2.Department of Civil EngineeringIndian Institute of Technology HyderabadHyderabadIndia

Personalised recommendations