Reflectors for Multiple Applications Based on Flux Compensation Method

  • Wang GuangzhenEmail author
  • Hou Yu
  • Li Jia
Conference paper
Part of the Lecture Notes in Electrical Engineering book series (LNEE, volume 517)


The reflector of one surface for Light-emitting diode (LED) is designed based on flux compensation method. It is easier to be fabricated compared with freeform lens. Moreover, the reflector can effectively reduce material absorption loss. This design method is simple and other researchers can understand and repeat more simply. The designed reflector also has a small exit angle for uniform illumination. It has high illuminance uniformity and flux efficiency, which are more than 90% and 95%, respectively. Reflectors designed here can be used in optical signal coupling, display cabinets, and other optical transmission applications.



This work was supported by the Science and Technology Projects of Hebei Province (Grant No. 16274522) and the Science and Technology Projects of Hebei Province (Grant No. 17210403).


  1. 1.
    Jae Suk Yang, A., Park, J.H., Beom-Hoan, O., Park, S.G., Lee, S.G.: Design method for a total internal reflection LED lens with double freeform surfaces for narrow and uniform illumination. J. Opt. Soc. Korea 20, 614–622 (2016)CrossRefGoogle Scholar
  2. 2.
    Wang, Xiaoli: LED ring array light source design and uniform illumination properties analysis. Optik 140, 273–281 (2017)CrossRefGoogle Scholar
  3. 3.
    Golmohammadi, S., Rabbani-Shabestari, S.J.: Design of white LED using GaN/InxGa(1 − x)N multiquantum well, Optik 126, 5820–5824 (2017)Google Scholar
  4. 4.
    Wang, G., Wang, L., Li, F., Zhang, G.: Collimating lens for light-emitting-diode light source based on non-imaging optics. Appl. Opt. 51, 1654–1659 (2012)CrossRefGoogle Scholar
  5. 5.
    Lee, T.X., Chen, B.S.: High uniformity and tolerance design for direct-lit LED backlight illumination using lagrange interpolation. J. Disp. Technol. 12, 1403–1410 (2016)CrossRefGoogle Scholar
  6. 6.
    Sun, W.S., Tien, C.L., Lo, W.C., Chuo, P.Y.: Optical design of an LED motorcycle headlamp with compound reflectors and a toric lens. Appl. Opt. 54, E102–E108 (2015)CrossRefGoogle Scholar
  7. 7.
    Moiseev, M.A., Doskolovich, L.L.: Design of TIR optics generating the prescribed irradiance distribution in the circle region. J. Opt. Soc. Am. A 29, 1758–1763 (2012)CrossRefGoogle Scholar
  8. 8.
    Tsai, C.Y.: Free-form surface design method for a collimator TIR lens. J. Opt. Soc. Am. A 33, 785–792 (2016)CrossRefGoogle Scholar
  9. 9.
    Wanga, G., Hou, Y., Hu, L., Tang, W., Gao, J., Wang, L.: Reflector designed for light-emitting-diode lighting source in three-dimensional space. Optik 126, 4534–4538 (2015)CrossRefGoogle Scholar
  10. 10.
    Prins, C.R., Boonkkamp, J.H.M.T.T., Roosmalen, J.V., Ijzerman, W.L., Tukker, T.W.: A Monge–Ampère-Solver for free-form reflector design. SIAM J. Sci. Comput. 36, B640–B660 (2014)CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2020

Authors and Affiliations

  1. 1.Foundation DepartmentTangshan UniversityTangshanChina
  2. 2.Department of PhysicsTangshan Normal UniversityTangshanChina

Personalised recommendations