Advertisement

Selection of the Optimum Hole Quality Conditions in Manufacturing Environment Using MCDM Approach: A Case Study

  • Ravi Pratap Singh
  • Mohit Tyagi
  • Ravinder KatariaEmail author
Conference paper
Part of the Lecture Notes on Multidisciplinary Industrial Engineering book series (LNMUINEN)

Abstract

In the current competitive structure of the manufacturing industries, the qualitative decision-making has become an issue of paramount prominence to solve the real-life industrial environment based problems. It becomes further more complex when the decision maker has to be in concern with the multiple constraints at one time. The present article has targeted to select the optimum hole quality conditions for performing ultrasonic machining of a selected composite material through multiple criteria decision-making (MCDM) approaches. The experimentation has been designed according to the Taguchi’s methodology. The hole quality based attributes (out of roundness, hole over size and conicity) have been studied under the influential situations of several selected input variables namely; thickness of workpiece, cobalt content, tool profile, power rating, material of tool and grit size. In addition, two different MCDM approaches called as the additive ratio assessment (ARAS) technique, and the TOPSIS method have been attempted for the selection of the best optimum condition that can offer fruitful hole quality based outcomes for the considered manufacturing environment problem. The optimality function and the specific alternative to the perfect solution to observe the best available alternative have been computed as per the ARAS, and the TOPSIS techniques, respectively. Results revealed that, for both the explored MCDM methods, the 9th experimental run offers the highest value of the calculated hole quality attribute index. This particular conducted test is entailing of the parametric blend as; cobalt content—24%, workpiece thickness—3 mm, tool profile—hollow, material of tool—stainless steel, abrasive grit size—500 (mesh size) and power rating—80%.

Keywords

ARAS method Decision-making Manufacturing environment MCDM approaches TOPSIS method 

References

  1. 1.
    Hocheng, H., Kuo, K.L., Lin, J.T.: Machinability of zirconia ceramic in ultrasonic drilling. Mater. Manuf. Process. 14(5), 713–724 (1999)CrossRefGoogle Scholar
  2. 2.
    Singh, R.P., Singhal, S.: Rotary ultrasonic machining: a review. Mater. Manuf. Process. 31, 1795–1824 (2016)CrossRefGoogle Scholar
  3. 3.
    Singh, R.P., Singhal, S.: Investigation of machining characteristics in rotary ultrasonic machining of alumina ceramic. Mater. Manuf. Process. 32, 309–326 (2016)CrossRefGoogle Scholar
  4. 4.
    Jadoun, R.S., Kumar, P., Mishra, B.K.: Taguchi’s optimization of process parameters for production accuracy in ultrasonic drilling of engineering ceramics. Prod. Eng. Res. Dev. 3, 243–253 (2009)CrossRefGoogle Scholar
  5. 5.
    Jangra, K., Grover, S., Aggrawal, A.: Digraph and matrix method for the performance evaluation of carbide compacting die manufactured by wire EDM. Int. J. Adv. Manuf. Technol. 54, 579–591 (2011)CrossRefGoogle Scholar
  6. 6.
    Jangra, K., Grover, S., Chan, F.T.S., Aggrawal, A.: Digraph and matrix method to evaluate the machinability of tungsten carbide composite with wire EDM. Int. J. Adv. Manuf. Technol. 56, 959–974 (2011)CrossRefGoogle Scholar
  7. 7.
    Ramulu, M.: Ultrasonic machining effects on the surface finish and strength of silicon carbide ceramics. Int. J. Manuf. Technol. Manag. 7, 107–125 (2005)CrossRefGoogle Scholar
  8. 8.
    Rao, R.V., Gandhi, O.P.: Digraph and matrix methods for the machinability evaluation of work materials. Int. J. Mach. Tools Manuf. 42, 321–330 (2002)CrossRefGoogle Scholar
  9. 9.
    Rao, R.V., Padmanabhan, K.K.: Rapid prototyping process selection using graph theory and matrix approach. J. Mater. Process. Technol. 194, 81–88 (2007)CrossRefGoogle Scholar
  10. 10.
    Rao, R.V., Gandhi, O.P.: Failure cause analysis of machine tools using digraph and matrix methods. Int. J. Mach. Tools Manuf. 42, 521–528 (2002)CrossRefGoogle Scholar
  11. 11.
    Rao, R.V., Padmanabhan, K.K.: Selection, identification and comparison of industrial robots using digraph and matrix methods. Robot. Comput.Integr. Manuf. 22, 373–383 (2006)CrossRefGoogle Scholar
  12. 12.
    Singh, R.P., Singhal, S.: Rotary ultrasonic machining of macor ceramic: an experimental investigation and microstructure analysis. Mater. Manuf. Process. 32, 927–939 (2016)CrossRefGoogle Scholar
  13. 13.
    Lalchhuanvela, H., Doloi, B., Battacharyya, B.: Analysis on profile accuracy for ultrasonic machining of alumina ceramics. Int. J. Adv. Manuf. Technol. 67, 1683–1691 (2013)CrossRefGoogle Scholar
  14. 14.
    Singh, R.P., Singhal, S.: Experimental investigation of machining characteristics in rotary ultrasonic machining of quartz ceramic. J. Mater. Des. Appl. (2016d).  https://doi.org/10.1177/1464420716653422CrossRefGoogle Scholar
  15. 15.
    Singh, R.P., Kataria, R., Kumar, J., Verma, J.: Multi-response optimization of machining characteristics in ultrasonic machining of WC-Co composite through Taguchi method and grey-fuzzy logic. AIMS Mater. Sci. 5, 75–92 (2018)CrossRefGoogle Scholar
  16. 16.
    Singh, R.P., Kumar, J., Kataria, R., Singhal, S.: Investigation of the machinability of commercially pure titanium in ultrasonic machining using graph theory and matrix method. J. Eng. Res. 3, 75–94 (2015)CrossRefGoogle Scholar
  17. 17.
    Rao, R.V.: Decision making in manufacturing environment. Springer Publications (2007)Google Scholar
  18. 18.
    Adithan, M., Venkatesh, V.C.: Production accuracy of holes in ultrasonic drilling. Wear 40(3), 309–318 (1976)CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  • Ravi Pratap Singh
    • 1
  • Mohit Tyagi
    • 1
  • Ravinder Kataria
    • 2
    Email author
  1. 1.Department of Industrial and Production EngineeringDr. B. R. Ambedkar National Institute of TechnologyJalandharIndia
  2. 2.School of Mechanical EngineeringLPUJalandharIndia

Personalised recommendations