Advertisement

Study on Tensile Strength of GFRP Nanocomposites by VARTM

  • A. ThiagarajanEmail author
  • K. Jagadish Chandra Bose
  • K. Velmurugan
  • V. S. K. Venkatachalapathy
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

Present state of the art aims to enhance the mechanical properties of GFRP by incorporating nanofillers with different weight percentages into the resin matrix. Zinc oxide (ZnO) nanoparticles are used as the filler material and infused into the epoxy resin (diglycidyl ether of bisphenol A). In this work, woven roving mat (WRM) of glass fiber is used as reinforcement material. Nanocomposite specimen was prepared by VARTM process by varying the percentages of zinc oxide weight as 0, 1, 3 and 5 wt% respectively. The surface morphology was detected by scanning electron microscope (SEM). The effect of ZnO nanoparticles on mechanical properties of GFRP was determined by conducting tensile test. From the results obtained, it is evident that the infusion of 1 wt% zinc oxide (ZnO) nanoparticles in epoxy resin showed 20% increment in tensile strength compared with neat epoxy composite.

Keywords

Glass fiber-reinforced polymer (GFRP) Zinc oxide (ZnO) VARTM Tensile strength SEM 

References

  1. 1.
    Callister WD (2007) Materials science and engineering: an introduction, 7th edn. Wiley, New JerseyGoogle Scholar
  2. 2.
    Staab GH (1999) Laminar composites. Butter Worth-Heinemann, LondonGoogle Scholar
  3. 3.
    Daniel I, Ishai O (1994) Engineering mechanics of composite materials. Oxford University Press, New YorkGoogle Scholar
  4. 4.
    Bank LC (2006) Composites for construction: structural design with FRP materials. Wiley, New JerseyGoogle Scholar
  5. 5.
    Lopez FA, Martin MI, Alguacil FJ, Rincon JM, Centeno TA, Romero M (2012) Thermolysis of fiber glass polyester composite and reutilization of the glass fiber residue to obtain a glass ceramic material. J Anal Appl Pyrol 93:104–112Google Scholar
  6. 6.
    Sahu H, Rout A, Kumar A (2012) Development and characterization of particulate filled glass fiber reinforced hybrid composites. Indian J Mech Eng Technol 2(3):89–93Google Scholar
  7. 7.
    Raja RS, Manisekar K, Manikandan V (2014) Study on mechanical properties of fly ash impregnated glass fiber reinforced polymer composites using mixture design analysis. Mater Design 55:499–508Google Scholar
  8. 8.
    Sathiyamurthy S, Thaheer ASA, Jayabal S (2013) Prediction and optimization of mechanical properties of particles filled coir–polyester composites using ANN and RSM algorithms. Indian J Fiber Text Res 38:81–86Google Scholar
  9. 9.
    Fu S-Y, Feng X-Q, Lauke B, Mai Y-W (2008) Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites. Compos Part-B 39:933–961CrossRefGoogle Scholar
  10. 10.
    Hossain MK, Hossain ME, Hosur MV, Jeelani S (2011) Flexural and compression response of woven e-glass/polyester–CNF nano phased composites. Compos Part-A 42:1774–1782Google Scholar
  11. 11.
    Yahya N, Puspitasari P, Latiff NRA (2013) Hardness improvement of dental amalgam using zinc oxide and aluminum oxide nanoparticles. In: Characterization and development of biosystems and biomaterials. Advanced structural materials, vol 29, pp 9–32Google Scholar
  12. 12.
    Hong JI, Winberg P, Schadler LS, Siegel RW (2005) Dielectric properties of zinc oxide/low density polyethylene nanocomposites. Mater Lett 59:473–476Google Scholar
  13. 13.
    Madugu IA, Abdulwahab M, Aigbodion VS (2009) Effect of iron fillings on the properties and microstructure of cast fiber–polyester/iron filings particulate composite. J Alloys Compd 11(13); 476:807Google Scholar
  14. 14.
    Garay AC, Heck V, Zattera AJ, Souza JA, Amico SC (2011) Influence of calcium carbonate on RTM and RTM light processing and properties of molded composites. J Reinf Plast Compos 30(14):1213–1221CrossRefGoogle Scholar
  15. 15.
    Moorthy SS, Manonmani K (2013) Fabrication and characterization of TiO2 particulate filled glass fiber reinforced polymer composite. Mater Phys Mech 18:28–34Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  • A. Thiagarajan
    • 1
    Email author
  • K. Jagadish Chandra Bose
    • 1
  • K. Velmurugan
    • 1
  • V. S. K. Venkatachalapathy
    • 1
  1. 1.Department of Mechanical EngineeringSri Manakula Vinayagar Engineering CollegePuducherryIndia

Personalised recommendations