Advertisement

Study of Forces, Surface Finish, and Tool Life on Machining of Inconel 718

  • K. VenkatesanEmail author
  • S. Devendiran
  • Biplav Bijoy Goswami
  • Prafful Kumar
  • Shakya Rishabhsingh Tejpalsinngh
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

Inconel 718 is a family of nickel-based superalloy. Dry experiments are carried out based on L16 orthogonal array using advanced coated cutting tool. The factor effects on turning forces, surface roughness, and flank wear are studied using response surface 3D plots. It reveals that higher cutting speed, low feed rate along cutting depth resulted in lower cutting force and surface roughness but low cutting speed for tool wear. Using desirability function approach, the optimal parameter is determined as feed rate of 0.1 mm/rev, cutting speed of 70 m/min, and 0.5 mm depth of cut. Using SEM, abrasive wear along with welding of workpiece material is found on the wedge of cutting insert. At the end of tool life, the obtained surface is about 0.479 µm at 4 min.

Keywords

Turning responses Carbide inserts Dry machining 

References

  1. 1.
    Venkatesan K (2017) The study on force, surface integrity, tool life and chip on laser assisted machining of Inconel 718 using Nd: YAG laser source. J Adv Res 8(4):407–423MathSciNetCrossRefGoogle Scholar
  2. 2.
    Venkatesan K, Ramanujam R, Kuppan P (2014) Laser assisted machining of difficult to cut materials: research opportunities and future directions-A comprehensive review. Proc Eng 97:1626–1636CrossRefGoogle Scholar
  3. 3.
    Ulutan D, Ozel T (2011) Machining induced surface integrity in titanium and nickel alloys: a review. Int J Mach Tools Manuf 51(3):250–280CrossRefGoogle Scholar
  4. 4.
    D’Addona DM, Raykar SJ, Narke MM (2017) High speed machining of Inconel 718: tool wear and surface roughness analysis. Proc CIRP 62:269–274CrossRefGoogle Scholar
  5. 5.
    Marques A, Guimarães C, da Silva RB, Fonseca MDPC, Sales WF, Machado ÁR (2016) Surface integrity analysis of Inconel 718 after turning with different solid lubricants dispersed in neat oil delivered by MQL. Proc Manuf 5:609–620Google Scholar
  6. 6.
    Madariaga A, Kortabarria A, Hormaetxe E, Garay A, Arrazola PJ (2016) Influence of tool wear on residual stresses when turning Inconel 718. Proc CIRP 45:267–270CrossRefGoogle Scholar
  7. 7.
    Tanaka H, Sugihara T, Enomoto T (2016) High speed machining of Inconel 718 focusing on wear behaviors of PCBN cutting tool. Proc CIRP 46:545–548CrossRefGoogle Scholar
  8. 8.
    Zhou J, Bushlya V, Peng RL, Chen Z, Johansson S, Stahl JE (2014) Analysis of subsurface microstructure and residual stresses in machined Inconel 718 with PCBN and Al2O3-SiCw tools. Proc CIRP 13:150–155CrossRefGoogle Scholar
  9. 9.
    Sugihara T, Enomoto T (2015) High speed machining of Inconel 718 focusing on tool surface topography of CBN tool. Proc Manuf 1:675–682Google Scholar
  10. 10.
    Sugihara T, Nishimoto Y, Enomoto T (2017) Development of a novel cubic boron nitride cutting tool with a textured flank face for high-speed machining of Inconel 718. Precision Eng 48:75–82CrossRefGoogle Scholar
  11. 11.
    He ZH, Zhang XM, Ding H (2016) Comparison of residual stresses in cryogenic and dry machining of Inconel 718. Proc CIRP 46:19–22CrossRefGoogle Scholar
  12. 12.
    Kadam GS, Pawade RS (2017) Surface integrity and sustainability assessment in high-speed machining of Inconel 718–an eco-friendly green approach. J Cleaner Prod 147:273–283CrossRefGoogle Scholar
  13. 13.
    Niaki FA, Mears L (2017) A comprehensive study on the effects of tool wear on surface roughness, dimensional integrity and residual stress in turning IN718 hard-to-machine alloy. J Manuf Proc 30:268–280CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  • K. Venkatesan
    • 1
    Email author
  • S. Devendiran
    • 1
  • Biplav Bijoy Goswami
    • 1
  • Prafful Kumar
    • 1
  • Shakya Rishabhsingh Tejpalsinngh
    • 1
  1. 1.School of Mechanical EngineeringVellore Institute of TechnologyVelloreIndia

Personalised recommendations