Advertisement

An Investigative Approach to Study the Corrosion Response of Copper–Brass TIG Welded Samples Using Nitric Acid as the Corroding Agent

  • Aparna Vinayan
  • Sourabh S. Nair
  • Raghuraman SrinivasanEmail author
  • Sivachidambaram Pichumani
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

The work intends to study the behavior of a unique blend of the welded sample, joined through a couple of welding techniques, against corrosion attack initiated by an acid as the corroding agent with different exposure times and acid concentrations. The corrosion aspects of copper–brass weldments against nitric acid have been the focal point of our paper. The authors have extensively elaborated on the analysis factors used for the study through the introduction section. The literature review helped us to engage in the study covering the fundamental aspects. In this research article, we have attempted to study the response of a copper–brass alloy combination, welded with two different techniques of TIG welding—ATIG and PCTIG— against nitric acid as the corrosive agent. The corrosion rate is determined by the method of mass loss or weight loss method.

Keywords

Copper Brass TIG welding ATIG PCTIG Corrosion Nitric acid 

References

  1. 1.
    Mihit M, Belkhaouda M, Bazzi L, Salghi R, El Issami S, Ait Addia E (2007) Behaviour of brasses corrosion in nitric acid with and without PMT. Portugaliae Electrochim Acta 25(2007):471–480CrossRefGoogle Scholar
  2. 2.
    Abeda Y, Kissi M, Hammoutia B, Taleb M, Kertit S (2004) Peptidic compound as a corrosion inhibitor for brass in nitric acid solution. Progress Org Coat 50:144–147CrossRefGoogle Scholar
  3. 3.
    Mihit M, El Issami S, Bouklah M, Bazzi L, Hammouti B, Ait Addi E, Salghi R, Kertit S (2006) The inhibited effect of some tetrazolic compounds towards the corrosion of brass in nitric acid solution. Appl Surf Sci 252(2006):2389–2395CrossRefGoogle Scholar
  4. 4.
    Ebrahimzadeha M, Gholamia M, Momenia M, Kosaria A, Moayeda MH, Davoodib A (2015) Theoretical and experimental investigations on corrosion control of 65Cu–35Zn brass in nitric acid by two thiophenol derivatives. Appl Surf Sci 332:384–392CrossRefGoogle Scholar
  5. 5.
    Sarver E, Edwards M (2011) Effects of flow, brass location, tube materials and temperature on corrosion of brass plumbing devices. Corros Sci 53:1813–1824CrossRefGoogle Scholar
  6. 6.
    Manam NS, Harun WSW, Shri DNA, Ghani SAC, Kurniawan T, Ismail MH, Ibrahim MHI (2017) Study of corrosion in biocompatible metals for implants: a review. J Alloy Compd 701:698–715CrossRefGoogle Scholar
  7. 7.
    Asri RIM, Harun WSW, Samykano M, Lah NAC, Ghani SAC, Tarlochan F, Raza MR (2017) Corrosion and surface modification on biocompatible metals: a review. Mater Sci Eng, C 77:1261–1271CrossRefGoogle Scholar
  8. 8.
    Modenesi Paulo J, ApolinaÂrio EustaÂquio R, Pereira Iaci M (2000) TIG welding with single-component fluxes. J Mater Process Technol 99:260–265CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  • Aparna Vinayan
    • 1
  • Sourabh S. Nair
    • 1
  • Raghuraman Srinivasan
    • 1
    Email author
  • Sivachidambaram Pichumani
    • 1
  1. 1.SASTRA Deemed UniversityThanjavurIndia

Personalised recommendations