Advertisement

Characterization of Economical Aluminium MMC Reinforced with Weld Slag Particles

  • P. ParanthamanEmail author
  • P. M. Gopal
  • N. Sathiesh Kumar
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

Rapid advancement in technology forces the researchers to search for advanced materials with higher performance like composites. The composites are known for their better mechanical properties and less weight, but the cost is the major factor that hinders the wider application of these materials. In this study, welding slag is reused as reinforcement to produce economical metal matrix composites, because slag is produced in enormous amount during welding of materials which causes pollution. The aluminium alloy (Al 6063) is used as base material. Weld slag of different weight proportions (0, 5 10 and 15 wt%) is mixed with Al 6063 through stir casting process, and samples are taken for investigation. The mechanical properties of the composites like tensile strength, compression strength and its wear behaviour are analysed. And also, the microstructure of the MMC is analyzed through optical microscope (OM) to determine the weld slag distribution in aluminium matrix material. The observed result indicates that the addition of weld slag particles with aluminium increases the mechanical properties. The composite having 15% of welding slag exhibits the best tensile and wear resistance.

Keywords

Composite Weld slag Stir casting Tensile strength Compressive strength 

References

  1. 1.
    Alaneme KK, Bodunrin MO, Awe AA (2018) Microstructure, mechanical and fracture properties of groundnut shell ash and silicon carbide dispersion strengthened aluminium matrix composites. J King Saud Univ Eng Sci 30(1):96–103Google Scholar
  2. 2.
    Ashori A (2008) Wood–plastic composites as promising green-composites for automotive industries. Bioresour Technol 99(11):4661–4667CrossRefGoogle Scholar
  3. 3.
    Karthikeeyan S, Paranthaman P, Gopi Kanna J, Karthick G (2015) Evaluation of natural fiber reinforced composite by varying hybrid ratio. Int J App Eng Res 10(85):694–703Google Scholar
  4. 4.
    Singh S (2017) Wear behavior of Al-6063/SiC metal matrix composites reinforced with different particles sizes using Taguchi’s methodology. Mater Today Proc 4(9):10148–10152CrossRefGoogle Scholar
  5. 5.
    Kumarasamy SP, Vijayananth K, Thankachan T, Muthukutti GP (2017) Investigations on mechanical and machinability behavior of aluminum/flyash cenosphere/Gr hybrid composites processed through compocasting. J Appl Res Technol 15(5):430–441CrossRefGoogle Scholar
  6. 6.
    Prakash KS, Kanagaraj A, Gopal PM (2015) Dry sliding wear characterization of Al 6061/rock dust composite. Trans Nonferrous Met Soc China 25(12):3893–3903CrossRefGoogle Scholar
  7. 7.
    Prakash KS, Gopal PM, Kavimani V (2017) Effect of rock dust, cenosphere and E-waste glass addition on mechanical, wear and machinability behaviour of Al 6061 hybrid composites. Indian J Eng Mater Sci 24:270–282Google Scholar
  8. 8.
    Gopal PM, Prakash KS, Jayaraj S (2018) WEDM of Mg/CRT/BN composites. Effect of materials and machining parameters. Mater Manuf Processes 33(1):77–84CrossRefGoogle Scholar
  9. 9.
    Hariprasad T, Varatharajan K, Ravi S (2014) Wear characteristics of B4C and Al2O3 reinforced with Al 5083 metal matrix based hybrid composite. Procedia Eng 97:925–929CrossRefGoogle Scholar
  10. 10.
    Gopal PM, Prakash KS, Nagaraja S, Aravinth NK (2017) Effect of weight fraction and particle size of CRT glass on the tribological behaviour of Mg-CRT-BN hybrid composites. Tribol Int 116:338–350CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  • P. Paranthaman
    • 1
    Email author
  • P. M. Gopal
    • 1
  • N. Sathiesh Kumar
    • 1
  1. 1.Department of Mechanical EngineeringKarpagam Academy of Higher EducationCoimbatoreIndia

Personalised recommendations