Advertisement

Effect of Nano-Structured Factors on the Properties of the Coatings Produced by Detonation Spraying Method

  • L. Markashova
  • Yu. Tyurin
  • O. BerdnikovaEmail author
  • O. Kolisnichenko
  • I. Polovetskyi
  • Ye. Titkov
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

Surface treatment by detonation spraying of composite coatings significantly increases the service life of structures. The demanded direction of application of this method is spraying of powders of various systems. The purpose of this paper is to study the structure (phase composition, microhardness, grain and subgrain structure, dislocation density, dispersed micro- and nano-particles, their composition, and distribution), and the properties of metal-ceramic coatings: Al2O3–Ti; Al2O3–Al; ZrSiO4 sprayed on various substrates materials (aluminum, titanium). The investigations of structural-phase state of coatings were carried out at all the structural levels using comprehensive methodological approach including optical metallography, analytical scanning electron microscopy, X-ray structural phase analysis, as well as transmission micro diffraction electron microscopy. As a result of the carried out work the experimental data on the full complex of structural and phase parameters of coatings, sprayed at different modes of cumulative-detonation spraying, were obtained. The obtained results showed the prospects of using multi-chamber detonation spraying, which ensures the necessary complex of mechanical properties of coatings by forming the most favorable structure. The surface treatment of metals by the detonation spraying of coatings makes it possible to obtain composite surface layers with high operational properties. The matrix of such coatings is characterized by a significant dispersion of the substructure, the formation of strengthening phases of nanoscale dimensions and a uniform distribution of dislocation density.

Keywords

Coatings Detonation spraying Structure Phase composition Nano-particles Dislocation density Hardening Local internal stresses Crack resistance 

References

  1. 1.
    Tyurin Y, Kolisnichenko O, Duda I (2009) Comparative analysis of cumulative-detonation and HVOF thermal spray installations efficiency. Hardening Technol Coat 5:27–33Google Scholar
  2. 2.
    Tyurin Y, Kolisnichenko O, Poleshuk M (2009) Cumulatively-detonation device for thermal spray coatings. In: Proceedings of the 9th international conference films and coatings, St. Petersburg, 26–29 May 2016, pp 44–46Google Scholar
  3. 3.
    Kolisnichenko OV, Tyurin YN, Tovbin R (2017) Efficiency of the coating deposition process using multi-chamber detonation device. Paton Weld J 10:18–23.  https://doi.org/10.15407/tpwj2017.10.03CrossRefGoogle Scholar
  4. 4.
    Tyurin Y, Kolisnichenko O, Jia J et al (2016) Characterization and properties of cermet coatings formed by a new multi-chamber detonation sprayer. In: International thermal spray conference (ITSC 2016), Shanghai/P.R. China, 10–12 May 2016, 324, DVS-Berichte, pp 862–865Google Scholar
  5. 5.
    Markashova LI, Tyurin YN, Kolisnichenko OV et al (2017) Effect of structure on properties of Al2O3 and Al (or Ti) mechanical mixture coatings produced by multichamber detonation spraying method. Paton Weld J 9:27–32.  https://doi.org/10.15407/tpwj2017.09.05
  6. 6.
    Markashova LI, Poznyakov VD, Gaivoronskii AA et al (2012) Estimation of the strength and crack resistance of the metal of railway wheels after long-term operation. Mat Sci 47(6):799–806.  https://doi.org/10.1007/s11003-012-9458-1CrossRefGoogle Scholar
  7. 7.
    Markashova L, Berdnikova O, Bernatskyi A et al (2017) Physical and mechanical properties of high-strength steel joints produced by laser welding. In: Young scientists forum on applied physics and engineering (YSF), IEEE International, p 88–91.  https://doi.org/10.1109/YSF.2017.8126596
  8. 8.
    Suzuki HO (1967) On the yield strength of polycrystalline metals and alloys. In: Structure and mechanical properties of metals. Metallurgiya, Moscow, pp 255–260 [In Russian]Google Scholar
  9. 9.
    Ashby MF (1972) On the Orowan Stress. In: Physics of strength and plasticity. Metallurgiya, Moscow, pp 88–107 [In Russian]Google Scholar
  10. 10.
    Gol’dshtein MI, Litvinov VS, Bronfin BM (1986) Metallophysics of high-strength alloys. Metallurgiya, Moscow [In Russian]Google Scholar
  11. 11.
    Conrad H (1973) Model of strain hardening for explaining the influence of grain size on the stress of metal flow. In: Gordienko LK (ed) Ultrafine grain in metals. Metallurgiya, Moscow, pp 206–219 [In Russian]Google Scholar
  12. 12.
    Armstrong RW (1973) Strength properties of metals with ultrafine grain. In: Gordienko LK (ed) Ultrafine grain in metals. Metallurgiya, Moscow, pp 11–40 [In Russian]Google Scholar
  13. 13.
    Petch NJ (1953) The cleavage strength of polycrystalline. J Iron Steel Inst 173(5):25–28Google Scholar
  14. 14.
    Orowan E (1954) Dislocation in metals. AIME, New YorkGoogle Scholar
  15. 15.
    Ashby MF (1983) Mechanisms of deformation and fracture. Adv Appl Mech 23:118–177Google Scholar
  16. 16.
    Kelly A, Nicholson RB (1963) Precipitation hardening. Pergamon, New YorkGoogle Scholar
  17. 17.
    Ebelling R, Ashby MF (1966) Yielding and flow of two phase copper alloys. Phil Mag 13(7):805–809CrossRefGoogle Scholar
  18. 18.
    Panin VE, Likhachev VA, Grinyaeva YV (1985) Structural levels of deformation of solids. Nauka, Novosibirsk [In Russian]Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  • L. Markashova
    • 1
  • Yu. Tyurin
    • 1
  • O. Berdnikova
    • 1
    Email author
  • O. Kolisnichenko
    • 1
  • I. Polovetskyi
    • 1
  • Ye. Titkov
    • 1
  1. 1.E.O. Paton Electric Welding Institute of the NAS of UkraineKievUkraine

Personalised recommendations