Advertisement

Supply and Temperature Independent Voltage Reference Circuit in Subthreshold Region

  • Vineysarathi KokkulaEmail author
  • Akash Joshi
  • Raghvendra Deshmukh
Conference paper
Part of the Communications in Computer and Information Science book series (CCIS, volume 892)

Abstract

This paper presents a voltage reference circuit, operating in sub-threshold region. The circuit is made tolerant to temperature and supply variations. The temperature tolerant behaviour of reference circuit is achieved by incorporating the difference of gate to source voltages of high Vth and standard Vth transistors. The bias voltage for the reference circuit is generated using a bias circuit and made temperature insensitive using a variable load with digital trimming technique. The circuit is simulated with 0.18 \(\upmu \)m CMOS models. Reference voltage variation with supply is 6.25 mV/V, variation with temperature is 9.37 uV/C in 0 \(^\circ \)C to 100 \(^\circ \)C temperature sweep. The power consumption is 50 nW at room temperature with 0.8 V as supply voltage. Power Supply Rejection Ratio (PSRR) of the proposed circuit at room temperature with 0.8 V supply is simulated to be −72 dB at 100 Hz and −23 dB at 1 MHz.

Keywords

Reference voltage Subthreshold CMOS 

References

  1. 1.
    Liu, Y., Zhan, C., Wang, L.: An ultralow power subthreshold CMOS voltage reference without requiring resistors or BJTs. IEEE Trans. Very Large Scale Integr. (VLSI) Syst. 26(1), 201–205 (2018)CrossRefGoogle Scholar
  2. 2.
    Lee, J.M., et al.: 5.7 A 29nW bandgap reference circuit. In: IEEE International Solid-State Circuits Conference - (ISSCC) Digest of Technical Papers, San Francisco, CA, pp. 1–3 (2015)Google Scholar
  3. 3.
    Lee, I., Sylvester, D., Blaauw, D.: A subthreshold voltage reference with scalable output voltage for low-power IoT systems. IEEE J. Solid-State Circ. 52(5), 1443–1449 (2017)CrossRefGoogle Scholar
  4. 4.
    Chatterjee, B., Modak, N., Amaravati, A., Mistry, D., Das, D.M., Baghini, M.S.: A sub-1 V, 120 nW, PVT-variation tolerant, tunable, and scalable voltage reference with 60-dB PSNA. IEEE Trans. Nanotechnol. 16(3), 406–410 (2017)Google Scholar
  5. 5.
    Albano, D., Crupi, F., Cucchi, F., Iannaccone, G.: A sub- \({kT}/q\) voltage reference operating at 150 mV. IEEE Trans. Very Large Scale Integr. (VLSI) Syst. 23(8), 1547–1551 (2015)CrossRefGoogle Scholar
  6. 6.
    Anvesha, A., Baghini, M.S.: A sub-1V 32nA process, voltage and temperature invariant voltage reference circuit. In: 2013 26th International Conference on VLSI Design and 2013 12th International Conference on Embedded Systems, Pune, pp. 136–141 (2013)Google Scholar
  7. 7.
    Zeng, Y., Huang, Y., Zeng, M., Tan, H.-Z.: A 1.2nW, 2.1ppm/\(\circ \)C subthreshold CMOS voltage reference without resistors. In: IET International Conference on Information and Communications Technologies (IETICT 2013), Beijing, pp. 112–116 (2013)Google Scholar
  8. 8.
    Ueno, K., Hirose, T., Asai, T., Amemiya, Y.: A 300 nW, 15 ppm/C, 20 ppm/V CMOS voltage reference circuit consisting of subthreshold MOSFETs. IEEE J. Solid-State Circ. 44(7), 2047–2054 (2009)CrossRefGoogle Scholar
  9. 9.
    Wang, Y., Zhu, Z., Yao, J., Yang, Y.: A 0.45-V, 14.6-nW CMOS subthreshold voltage reference with no resistors and no BJTs. IEEE Trans. Circ. Syst. II: Expr. Briefs 62(7), 621–625 (2015)Google Scholar
  10. 10.
    Klimach, H., Costa, A.L.T., Monteiro, M.F.C., Bampi, S.: Resistorless switched-capacitor bandgap voltage reference with low sensitivity to process variations. Electron. Lett. 49(23), 1448–1449 (2013)CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  • Vineysarathi Kokkula
    • 1
    Email author
  • Akash Joshi
    • 1
  • Raghvendra Deshmukh
    • 1
  1. 1.Center for VLSI and NanotechnologyVisvesvaraya National Institute of TechnologyNagpurIndia

Personalised recommendations