Advertisement

Microstructure and Mechanical Properties of a Ti–Al–Sn–Zr–Mo–Nb–W–Si High-Temperature Titanium Alloy

  • Y. W. Diao
  • X. Y. SongEmail author
  • W. J. Zhang
  • M. Y. Zhao
  • W. J. Ye
  • S. X. Hui
Conference paper
Part of the Springer Proceedings in Physics book series (SPPHY, volume 217)

Abstract

The Ti–6.5Al–2Sn–4Zr–1Mo–3Nb–0.5W–0.2Si (1M3N0.5W) alloy is a novel two-phase high-temperature alloy for short-term use up to 700 °C. The effects of different heat treatment regimes on the microstructure and mechanical properties were investigated through optical microscopy (OM), scanning electron microscopy (SEM), and tensile tests at the temperatures up to 700 °C. The results show that 1M3N0.5W alloy treated after single-stage annealing can get bimodal structure, which consists of equiaxed primary α (αp) phase and lamellar transformed β (βt) structure. The ultimate tensile strength (UTS) and 0.2% yield strength (YS) of the alloy at 700 °C are 473 and 310 MPa, respectively. The 1M3N0.5W alloy treated after solution and aging treatment can get Widmanstatten structure, which consists of coarse primary β-grain and secondary α-phase precipitated on the β-grain. Compared with single-stage annealed alloy, the UTS and YS of the solution and aging treated alloy are significantly improved at 700 °C, while the room-temperature plasticity is dramatically reduced.

Keywords

High-temperature titanium alloy Heat treatment Microstructure Mechanical property 

References

  1. 1.
    T. Li, et al., Effect of heat treatment processes on microstructure and properties of TC4-DT titanium alloy. Titan. Ind. Prog. (2017)Google Scholar
  2. 2.
    J. Cheng, C. Shi., Study progress of microstructure, properties and processing technology of titanium alloys. Hot Work. Technol. (2016)Google Scholar
  3. 3.
    M. Jackson, K. Dring, A review of advances in processing and metallurgy of titanium alloys. Metal Sci. J. 22(8), 881–887 (2006)Google Scholar
  4. 4.
    Z. Lian., Review of titanium industry progress in America, Japan and China. Rare Metal Mater. Eng. 32(8), x-584 (2003)Google Scholar
  5. 5.
    Y. Zhao et al., The high temperature deformation behavior and microstructure of TC21 titanium alloy. Mater. Sci. Eng., A 527(21), 5360–5367 (2010)CrossRefGoogle Scholar
  6. 6.
    J.F. Lei et al., LFatigue crack initiation in Ti–5Al–4Sn–2Zr–1Mo–0.7Nd–0.25Si high temperature titanium alloy. Int. J. Fatigue 19(93), 95–98 (1997)CrossRefGoogle Scholar
  7. 7.
    J. Mallol, M.C. Sarraga, M. Bartolomé et al., Hot working behavior of near-α alloy IMI834. Mater. Sci. Eng. A 396(1), 50–60 (2005)Google Scholar
  8. 8.
    F. Ma et al., Mechanical properties and strengthening effects of in situ, (TiB+TiC)/Ti-1100 composite at elevated temperatures. Mater. Sci. Eng. A 654, 352–358 (2016)CrossRefGoogle Scholar
  9. 9.
    Mengyi Hao, J. Cai, D.U. Juan, The effect of heat treatment on microstructure and properties of BT36 high temperature alloy. J. Aeronaut. Mater. 23(2), 14–17 (2003)Google Scholar
  10. 10.
    Weiju Jia et al., High-temperature deformation behavior of Ti60 titanium alloy. Mater. Sci. Eng. A 528(12), 4068–4074 (2011)CrossRefGoogle Scholar
  11. 11.
    Y. Wang, B. Lu, R. Yang, Effect of (Mo, W) content and heat treatment on the tensile properties of a high-temperature titanium alloy. Chin. J. Mater. Res. 24(3), 283–288 (2010)Google Scholar
  12. 12.
    Y. Zhang, D. Guo, et al., Growth behavior of α phase in Ti-5.6Al-4.8Sn-2.0Zr-1.0Mo-0.35Si-0.7Nd titanium alloy. Mater. Sci. Technol. 22(4), 459–464 (2006)Google Scholar
  13. 13.
    X. Gong, et al., Experimental studies on the dynamic tensile behavior of Ti–6Al–2Sn–2Zr–3Mo–1Cr–2Nb–Si alloy with Widmanstatten microstructure at elevated temperatures. Mater. Sci. Eng. A 523(1), 53–59 (2009)CrossRefGoogle Scholar
  14. 14.
    C Leyens, M Peters, Titanium and titanium alloys: fundamentals and applications. Titanium and Titanium Alloys (2003)Google Scholar
  15. 15.
    K.V.S. Srinadh, V. Singh, Oxidation behaviour of the near α-titanium alloy IMI 834. Bull. Mater. Sci. 27(4), 347–354 (2004)CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  • Y. W. Diao
    • 1
  • X. Y. Song
    • 1
    Email author
  • W. J. Zhang
    • 1
  • M. Y. Zhao
    • 1
  • W. J. Ye
    • 1
  • S. X. Hui
    • 1
  1. 1.State Key Laboratory of Nonferrous Metals and ProcessesGRIMAT Engineering Institute Co. Ltd.BeijingChina

Personalised recommendations