Advertisement

Effect of Cu Additions and Extrusion Treatment on the Microstructure and Mechanical Properties of Mg–6Sn–1Al Alloy

  • Zhijian Ye
  • Tong Li
  • Gui Lou
  • Jianhang Yue
  • Xinying TengEmail author
Conference paper
Part of the Springer Proceedings in Physics book series (SPPHY, volume 217)

Abstract

To further promote the industrial production and expand the applications of magnesium alloys in the field of lightweight structural materials, the researches of low-cost, rare-earth-free magnesium alloys have received extensive attention. Mg–Sn–Al alloys possess great potentials in the application. However, their mechanical properties are relatively poor, which is incapable of meeting the requirements of structural materials for replacing rare-earth magnesium alloy. In this paper, the microstructure of Mg–6Sn–1Al–xCu (x = 0.5, 1, 2) (wt%) alloys were characterized by XRD and SEM. The mechanical properties of the alloys were investigated by combined tensile and compression tests. The results showed that the addition of Cu in Mg–6Sn–1Al alloys had a positive effect on mechanical properties, which was mainly attributed to the fine-grained strengthening and second-phase strengthening. In addition, comparing with as-cast alloys, extrusion processing had led to significant changes in the microstructure of the alloy. Due to the recrystallization behaviors during the hot extrusion process, the eutectic structure of Mg2Sn (Al, Cu) disappeared and transformed into granular precipitates dispersing on the grain boundary. From the tensile and compressive test, it was found that the extruded Mg–6Sn–1Al–0.5Cu alloy exhibited the highest ultimate tensile strength (UTS) of 300.1 MPa, which was 131% higher than that of the cast alloy. With the increase of Cu addition, the 0.2% compressive yield strength increased from 72 MPa of Mg–6Sn–1Al–0.5Cu alloy to 110 MPa of Mg–6Sn–1Al–2Cu alloy, but their ultimate compressive strength (UCS) remained stable.

Keywords

Mg–Sn–Al alloy Microstructure Mechanical properties Recrystallization Mg2Sn phase 

Notes

Acknowledgements

The financial support for this work is provided by the National Natural Science Foundation of China (Nos. 51571102) and the Shandong Provincial Natural Science Foundation, China (ZR2018LE001).

References

  1. 1.
    K.U. Kainer, Metal Matrix Composites: Custom-made Materials for Automotive and Aerospace Engineering (Wiley, Weinheim, 2006)CrossRefGoogle Scholar
  2. 2.
    B.L. Mordike, T. Ebert, Magnesium: properties—applications—potential. Mater. Sci. Eng., A 302(1), 37–45 (2001)CrossRefGoogle Scholar
  3. 3.
    X.Y. Teng, T. Liu, G.R. Zhou et al., Effect of Mg–Zn–Y quasicrystal master alloy on microstructure and mechanical properties of AZ91 alloys. Adv. Mater. Res. 306, 582–587 (2011)CrossRefGoogle Scholar
  4. 4.
    Z. Yu, Y. Huang, X. Qiu et al., Fabrication of a high strength Mg–11Gd–4.5Y–1Nd–1.5Zn–0.5Zr (wt%) alloy by thermomechanical treatments. Mater. Sci. Eng., A 622, 121–130 (2015)CrossRefGoogle Scholar
  5. 5.
    H. Somekawa, Y. Osawa, A. Singh et al., Rare-earth free wrought-processed magnesium alloy with dispersion of quasicrystal phase. Scripta Mater. 61(7), 705–708 (2009)CrossRefGoogle Scholar
  6. 6.
    A.A. Nayeb-Hashemi, J.B. Clark, The Mg–Sn (magnesium–tin) system. Bull. Alloy Phase Diagr. 5(5), 466–476 (1984)CrossRefGoogle Scholar
  7. 7.
    J.F. Nie, Precipitation and hardening in magnesium alloys. Metall. Mater. Trans. A 43(11), 3891–3939 (2012)CrossRefGoogle Scholar
  8. 8.
    T.T. Sasaki, K. Oh-Ishi, T. Ohkubo et al., Effect of double aging and microalloying on the age hardening behavior of a Mg–Sn–Zn alloy. Mater. Sci. Eng., A 530, 1–8 (2011)CrossRefGoogle Scholar
  9. 9.
    R. Zheng, T. Bhattacharjee, A. Shibata et al., Simultaneously enhanced strength and ductility of Mg–Zn–Zr–Ca alloy with fully recrystallized ultrafine grained structures. Scripta Mater. 131, 1–5 (2017)CrossRefGoogle Scholar
  10. 10.
    W. Li, X. Huang, W. Huang, Effects of Ca, Ag addition on the microstructure and age-hardening behavior of a Mg–7Sn (wt%) alloy. Mater. Sci. Eng., A 692, 75–80 (2017)CrossRefGoogle Scholar
  11. 11.
    ASM, Metals Handbook, 10th edn, vol. 2 (ASM, Materials Park, OH, 1990), pp. 455–479Google Scholar
  12. 12.
    S. Sankaranarayanan, S. Jayalakshmi, M. Gupta, Effect of individual and combined addition of micro/nano-sized metallic elements on the microstructure and mechanical properties of pure Mg. Mater. Des. 37, 274–284 (2012)CrossRefGoogle Scholar
  13. 13.
    S. Jayalakshmi, S.V. Kailas, S. Seshan et al., Properties of squeeze cast Mg–6Zn–3Cu alloy and its saffil alumina short fibre reinforced composites. J. Mater. Sci. 41(12), 3743–3752 (2006)CrossRefGoogle Scholar
  14. 14.
    M. Gupta, S.N.M. Ling, Magnesium, Magnesium Alloys, and Magnesium Composites (Wiley, Hoboken, NJ, 2011)CrossRefGoogle Scholar
  15. 15.
    C. Zhao, X. Chen, F. Pan et al., Effect of Sn content on strain hardening behavior of as-extruded Mg–Sn alloys. Mater. Sci. Eng., A 713, 244–252 (2018)CrossRefGoogle Scholar
  16. 16.
    X.L. Nan, Microstructure, Tensile Properties and Deformation Mechanism of Mg–3Al–3Sn Magnesium Alloy (Jilin University, 2015)Google Scholar
  17. 17.
    Y. Weng, Z. Jia, L. Ding et al., Special segregation of Cu on the habit plane of lath-like β’ and QP2 precipitates in Al–Mg–Si–Cu alloys. Scripta Mater. 151, 33–37 (2018)CrossRefGoogle Scholar
  18. 18.
    H. Li, F. Cao, S. Guo et al., Effects of Mg and Cu on microstructures and properties of spray-deposited Al–Zn–Mg–Cu alloys. J. Alloy. Compd. 719, 89–96 (2017)CrossRefGoogle Scholar
  19. 19.
    Y. Wang, J. Peng, L. Zhong, On the microstructure and mechanical property of as-extruded Mg–Sn–Zn alloy with Cu addition. J. Alloy. Compd. 744, 234–242 (2018)CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  • Zhijian Ye
    • 1
  • Tong Li
    • 1
  • Gui Lou
    • 1
  • Jianhang Yue
    • 1
  • Xinying Teng
    • 1
    Email author
  1. 1.School of Materials Science and EngineeringUniversity of JinanJinanPeople’s Republic of China

Personalised recommendations