Advertisement

Geotechnical Education from Field

  • I. V. AnirudhanEmail author
Chapter
Part of the Developments in Geotechnical Engineering book series (DGE)

Abstract

Numerous engineering colleges in India teach civil engineering as an undergraduate course in which soil mechanics is a core subject. Foundation engineering is taught as a compulsory elective subject. However, the emphasis in the curriculum is on other topics. The primary study of soil mechanics or geotechnical engineering takes place at postgraduate level in a limited number of institutions. Rightly, these courses revolve upon the theoretical aspects of the subject because the students have no other avenue to learn the basics once they are out of the institute. Some premier institutions offer courses on design and construction practices using service of professionals from the field. The research programs like Master of Science in engineering or Doctoral research deal with narrower topics. The complex nature of the soil underground leaves several untold stories that make a geotechnical engineering graduate confused when the necessity of application arises. The classrooms are not making a geotechnical graduate look towards the right direction, and this results in a waste of time looking for the right answer. The soil mechanics taught in the classroom is applied in several forms, and this is blamed on the complexity of the soil. Learning the real geotechnical engineering starts on the field. An internship in a right organisation dealing with geotechnical design and construction shall be necessary for equipping the graduate to deal with practical problems. Well-documented case studies correlating with the mechanics are helpful. This paper is presenting some field cases and its correlation with classroom learning.

Keywords

Geotechnical education Case studies in geotechnical engineering Application of soil mechanics 

References

  1. 1.
    Terzaghi, K., Peck, R.B.: Soil Mechanics in Engineering Practice, 2nd edn. Wiley (1967)Google Scholar
  2. 2.
    Taylor, D.W.: Fundamentals of Soil Mechanics. Wiley, Chapman & Hall Limited, pp. 522–524 (1948)CrossRefGoogle Scholar
  3. 3.
    Bolton, M.D.: A Guide to Soil Mechanics. Universities Press (India) Private Ltd (1991)Google Scholar
  4. 4.
    Bjerrum, L.: Embankments on soft ground. In: Proceedings of the Specialty Conference on Performance of Earth and Earth Supported Structures, vol. 2, pp. 1–54. ASCE (1972)Google Scholar
  5. 5.
    Reese, L.C., Isenhower, W.M., Wang, S.T.: Analysis and Design of Shallow and Deep Foundations, Section 11.6.3. Wiley (2006)Google Scholar
  6. 6.
    Reese, L.C., O’Neill, M.W.: Drilled Shafts: Construction Procedures and Design Methods. U.S. Department of Transportation, Federal Highway Administration, Office of Implementation, McLean, VA (1998)Google Scholar
  7. 7.
    O’Neill, M.W., Reese, L.C.: Drilled Shafts: Construction Procedures and Design Methods. Report No: FHWA-IF-99-025, HIBT, Washington DC (1999)Google Scholar
  8. 8.
    Radhakrishnan, R., Anirudhan, I.V.: Ground improvement with pre-fabricated V drains and pre-load—a case study. In: Proceedings of the Symposium on Advances in Geotechnical Engineering, SAGE 2003, IIT Kanpur, pp. 426–430 (2003)Google Scholar
  9. 9.
    Anirudhan, I.V., Ramaswamy, S.V.: Revisiting a full raft foundation constructed on soft clay. In: Proceedings of the TC 207 Workshop on Soil-Structure Interaction and Retaining Walls, Paris, France, September 2013, pp. 38–50 (2013)Google Scholar
  10. 10.
    Ramaswamy, S.V., Anirudhan, I.V.: Case history as aid to teaching foundations on expansive soils. In: Proceedings of the Indian Geotechnical Conference IGC 2012 at Mumbai, vol. 2, pp. 1122–1125 (2012)Google Scholar
  11. 11.
    IS 8009 Part 1: Code of Practice for Calculation of Settlements of Foundations Part I Shallow Foundations Subjected to Symmetrical Static Vertical Loads (Fifth Reprint March 1999) (1976)Google Scholar
  12. 12.
    Anirudhan, I.V., Balakumar, V.: Pile foundation as settlement reducer for large MS storage tanks. In: Proceedings of the Indian Geotechnical Conference IGC 2010, Mumbai, pp. 995–998 (2010)Google Scholar
  13. 13.
    Kee, C.F.: The inverse slope as prediction of ultimate bearing capacity of piles. In: Proceedings of the 3rd South East Asian Conference on Soil Engineering, pp. 83–91 (1972)Google Scholar
  14. 14.
    Kota, V.K., Madhav, M.R., Bandi, V.: Estimation of shaft and base responses from pile load test. In: Proceedings of the 7th Annual Conference on Deep Foundation Technologies for Infrastructure Development in India, Chennai (2017)Google Scholar
  15. 15.
    IS 2911 (Part 1 Section 2): Design and Construction of Pile Foundations—Code of Practice, Part 1 Concrete Piles, Section 2 Bored Cast In-situ Concrete Piles (2010)Google Scholar
  16. 16.
    Penman, A.D.M., Watson, G.H.: The improvement of the tank foundation by the weight of its own test load. In: 6th Proceedings of ICSMFE, vol. 2, Montreal (1965)Google Scholar
  17. 17.
    Darragh, R.D.: Controlled water tests on preload tank foundation. J. Soil Mech. Found. Div. Proc. ASCE (SM5) 90, 303–329 (1964)Google Scholar
  18. 18.
    Bjerrum, L., Overland, A.: Foundation failure of an oil tank in Fredrikstad, Norway. In: Proceedings of the 4th International Conference on Soil Mechanics and Foundation Engineering, vol. 1, pp. 287–290 (1957)Google Scholar
  19. 19.
    Kalaiarasi, V., Aniudhan, I.V.: Controlling post construction settlement of storage tank foundation by pre-loading—a field study. In: Proceedings of the Indian Geotechnical Conference 2018, Chennai, vol. 1, pp. 459–462 (2006)Google Scholar
  20. 20.
    Chellis, R.D.: Pile foundations. In: Leonard, G.A. (ed.) Foundation Engineering, Chapter 7, pp. 653–661Google Scholar
  21. 21.
    IS 2911 (Part 1 Section 1): Design and Construction of Pile Foundations—Code of Practice, Part 1 Concrete Piles, Section 1Driven Cast In-situ Concrete Piles (1979)Google Scholar
  22. 22.
    IS 2911 (Part 4): Design and Construction of Pile Foundations—Code of Practice, Part 4 Load Test on Piles (2013)Google Scholar
  23. 23.
    Whitaker, T.: The Design of Piled Foundations, 2nd edn, pp. 26–47. Pergamon Press (1976)Google Scholar
  24. 24.
    Gandhi, S.R., Raju, V.S., Rawat, P.C.: Load transfer in piles—analysis and field test on instrumented pile. In: Proceedings of the Soil Properties—Problems and Practices, Indian Geotechnical Conference 1987, vol. 1, pp. 151–154 (1987)Google Scholar
  25. 25.
    Tomlinson, M.J.: Foundation Design and Construction, 5th edn., pp. 27–29, 408–410, 419–421, 474–480. ELBS (1986)Google Scholar
  26. 26.
    Kruizinga, J.: State of Art Report on SPT-CPT Correlation. II European Symposium on Penetration Testing (1982)Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  1. 1.Geotechnical SolutionsChennaiIndia

Personalised recommendations