Wear of Tires

  • Yukio NakajimaEmail author


Wear is phenomenologically characterized by not only physical factors, such as fracture, but also chemical factors, such as oxidization.

Supplementary material


  1. 1.
    Bridgestone (ed.), Fundamentals and Application of Vehicle Tires (in Japanese) (Tokyo Denki University Press, 2008)Google Scholar
  2. 2.
    A. Schallamach, Friction and abrasion of rubber. Wear 1, 384–417 (1957–1958)Google Scholar
  3. 3.
    A. Schallamach, Recent advances in knowledge of rubber friction and tire wear. Rubber Chem. Technol. 41, 209–244 (1968)CrossRefGoogle Scholar
  4. 4.
    Y. Uchiyama, Development of the rubber friction and wear (in Japanese). Nippon Gomu Kyokaishi 80(4), 120–127 (2007)CrossRefGoogle Scholar
  5. 5.
    S. Yamazaki et al., Indoor test procedures for evaluation of tire tread wear and influence of suspension alignment. Tire Sci. Technol. 17(4), 236–273 (1989)CrossRefGoogle Scholar
  6. 6.
    S. Yamazaki, Influence of drum curvature on tire tread wear in indoor tire wear testing (in Japanese). JARI Res. J. 19(4) (1997)Google Scholar
  7. 7.
    H. Sakai, Study on wear of tire tread—friction and wear at large slip speed (in Japanese). Nippon Gomu Kyokaishi 68, 251–257 (1995)CrossRefGoogle Scholar
  8. 8.
    O.L. Maitre, et al., Evaluation of Tire Wear Performance, SAE Paper, No. 980256 (1998)Google Scholar
  9. 9.
    A. Schallamach, D.M. Turner, Wear of slipping wheels. Wear 3, 1–25 (1960)CrossRefGoogle Scholar
  10. 10.
    A.G. Veith, The Driving Severity Number (DSN)—a step toward quantifying treadwear test conditions. Tire Sci. Technol. 14(3), 139–159 (1986)CrossRefGoogle Scholar
  11. 11.
    P.S. Pillai, Friction and wear of tires, in Friction, Lubrication, and Wear Technology, ed. By P.J. Blau (ASM Handbook, 1992), vol. 18, pp. 578–581Google Scholar
  12. 12.
    H. Sakai, Study on wear of tire tread—friction and wear at small slip angle (in Japanese). Nippon Gomu Kyokaishi 68, 39–46 (1995)CrossRefGoogle Scholar
  13. 13.
    A.G. Veith, Accelerated tire wear under controlled conditions-II, Some factors that influence tire wear. Rubber Chem. Technol. 46, 821–842 (1973)CrossRefGoogle Scholar
  14. 14.
    A. Schallamach, The role of hysteresis in tire wear and laboratory abrasion. Rubber Chem. Technol. 33, 857–867 (1960)CrossRefGoogle Scholar
  15. 15.
    T. Mashita, Recent study on tire wear (in Japanese), in Symposium of Vehicle Dynamics and Tire, JSAE (1983)Google Scholar
  16. 16.
    M. Togashi, H. Mouri, Evaluation and technology for improvement on tire wear and irregular wear (in Japanese). Nippon Gomu Kyokaishi 69, 739–748 (1996)CrossRefGoogle Scholar
  17. 17.
    V.E. Gough, Stiffness of cord and rubber constructions. Rubber Chem. Technol. 41, 988–1021 (1968)CrossRefGoogle Scholar
  18. 18.
    S.K. Clark (ed.), Mechanics of Pneumatic Tire (U.S. Government Printing Office, 1981)Google Scholar
  19. 19.
    B.K. Daniels, A note on Gough stiffness and tread life. Tire Sci. Technol. 5(4), 226–231 (1977)CrossRefGoogle Scholar
  20. 20.
    H. Sakai, Tire Engineering (in Japanese) (Guranpuri-Shuppan, 1987)Google Scholar
  21. 21.
    T. Fujikawa, S. Ymamazaki, Tire tread slip at actual vehicle speed. Trans. JSAE 26(3), 97–102 (1995)Google Scholar
  22. 22.
    J.J. Lazeration, An investigation of the slip of a tire tread. Tire Sci. Technol. 25(2), 78–95 (1997)CrossRefGoogle Scholar
  23. 23.
    T. Fujikawa et al., Tire model to predict treadwear. Tire Sci. Technol. 27(2), 106–125 (1999)CrossRefGoogle Scholar
  24. 24.
    Fujikoshi Corporation, in Technology seminar: Introduction to tribology, Machi-Business News, vol 7 (2005)Google Scholar
  25. 25.
    T. Hanzaka, Y. Nakajima, Physical Wear Model on Wear Progress of Irregular Wear of Tires (Case of River Wear of Truck & Bus Tires) (FISITA World Automotive Congress, Busan, 2016)Google Scholar
  26. 26.
    S. Yamazaki et al., Indoor test procedures for evaluation of tire treadwear and influence of suspension alignment. Tire Sci. Technol. 17(4), 236–273 (1989)CrossRefGoogle Scholar
  27. 27.
    S. Yamazaki et al., Influences of toe and camber angie on tire wear (in Japanese). JARI Res. J. 9(12), 473–476 (1987)Google Scholar
  28. 28.
    S. Kohmura et al., in Estimation Method of Tire Tread Wear on a Vehicle, SAE Paper, No. 910168 (1991)Google Scholar
  29. 29.
    W.K. Shepherd, Diagonal wear predicted by a simple wear model, in The Tire Pavement Interface, ed. by M.G. Pottinger, T.J. Yager, ASTM STP 929, American Society for Testing and Materials (1986), pp. 159–179Google Scholar
  30. 30.
    A. Sueoka et al., Polygonal wear of automobile tires (in Japanese). Trans. JSME (C) 62(600), 3145–3152 (1996)CrossRefGoogle Scholar
  31. 31.
    A. Sueoka et al., Polygonal wear of automobile tires. JSME Int. J. (C) 40(2), 209–217 (1997)CrossRefGoogle Scholar
  32. 32.
    H. Sakai, Friction and wear of tire tread rubber. Tire Sci. Technol. 24(3), 252–275 (1996)CrossRefGoogle Scholar
  33. 33.
    C. Wright et al., Laboratory tire wear simulation derived from computer modeling of suspension dynamics. Tire Sci. Technol. 19(3), 122–141 (1991)CrossRefGoogle Scholar
  34. 34.
    S. Yamazaki, Evaluation method of friction and wear, and points to consider (in Japanese). Nippon Gomu Kyokaishi 74(1), 12–17 (2001)CrossRefGoogle Scholar
  35. 35.
    D.O. Stalnaker et al., Indoor simulation of tire wear: some case studies. Tire Sci. Technol. 24(2), 94–118 (1996)CrossRefGoogle Scholar
  36. 36.
    D.O. Stalnaker, J.L. Turner, Vehicle and course characterization process for indoor tire wear simulation. Tire Sci. Technol. 30(2), 100–121 (2002)CrossRefGoogle Scholar
  37. 37.
    E.F. Knuth et al., Advances in Indoor Tire Tread Wear Simulation, SAE Paper, No. 2006-01-1447 (2006)Google Scholar
  38. 38.
    R. Loh, F. Nohl, in Multiaxial Wheel Transducer, Application and Results, VDI Berichte, No. 741 (1989)Google Scholar
  39. 39.
    H. Lupker et al., Numerical prediction of car tire wear. Tire Sci. Technol. 32(3), 164–186 (2004)CrossRefGoogle Scholar
  40. 40.
    H. Kobayashi et al., Estimation method of tread wear life (in Japanese). Toyota Tech. Rev. 50(1), 50–55 (2000)Google Scholar
  41. 41.
    D. Zheng, Prediction of tire tread wear with FEM steady state rolling contact simulation. Tire Sci. Technol. 31(3), 189–202 (2003)CrossRefGoogle Scholar
  42. 42.
    J.C. Cho, B.C. Jung, Prediction of tread pattern wear by an explicit finite element model. Tire Sci. Technol. 35(4), 276–299 (2007)CrossRefGoogle Scholar
  43. 43.
    S. Yamazaki, Evaluation procedures and properties of tire treadwear (in Japanese). Jidosha Kenkyu 13(4), 116–126 (1991)Google Scholar
  44. 44.
    T. Fujikawa, S. Yamazaki, Tire tread slip at actual vehicle speed (in Japanese). Jidosha Kenkyu 16(5), 178–181 (1994)Google Scholar
  45. 45.
    S. Knisley, A correlation between rolling tire contact friction energy and indoor tread wear. Tire Sci. Technol. 30(2), 83–99 (2002)MathSciNetCrossRefGoogle Scholar
  46. 46.
  47. 47.
    A.A. Goldstein, Finite element analysis of a quasi-static rolling tire model for determination of truck tire forces and moments. Tire Sci. Technol. 24(4), 278–293 (1996)CrossRefGoogle Scholar
  48. 48.
    R. Gall et al., Some notes on the finite element analysis of tires. Tire Sci. Technol. 23(3), 175–188 (1995)CrossRefGoogle Scholar
  49. 49.
    Y. Kaji, in Improvements in Tire Wear Based on 3D Finite Element Analysis, Tire Technology EXPO (2003)Google Scholar
  50. 50.
    G. Meschke et al., 3D simulations of automobile tires: material modeling, mesh generation and solution strategies. Tire Sci. Technol. 25(3), 154–176 (1997)CrossRefGoogle Scholar
  51. 51.
    E. Seta et al., Hydroplaning analysis by FEM and FVM: effect of tire rolling and tire pattern on hydroplaning. Tire Sci. Technol. 28(3), 140–156 (2000)CrossRefGoogle Scholar
  52. 52.
    A. Becker, B. Seifert, Simulation of wear with a FE tyre model using a steady state rolling formulation. Contact Mechanics III (1997), pp. 119–128Google Scholar
  53. 53.
    K.R. Smith et al., Prediction of tire profile wear by steady-state FEM. Tire Sci. Technol. 36(4), 290–303 (2008)CrossRefGoogle Scholar
  54. 54.
    J. Qi et al., Validation of a steady-state transport analysis for rolling treaded tires. Tire Sci. Technol. 35(3), 183–208 (2007)CrossRefGoogle Scholar
  55. 55.
    J. Padovan, I. Zeid, On the development of traveling load finite elements. Comput. Struct. 12, 77–83 (1980)MathSciNetzbMATHCrossRefGoogle Scholar
  56. 56.
    I. Zeid, J. Padovan, Finite element modeling of rolling contact. Comput. Struct. 14, 163–170 (1981)CrossRefGoogle Scholar
  57. 57.
    J. Padovan, O. Paramadilok, Transient and steady state viscoelastic rolling contact. Comput. Struct. 20(1–3), 545–553 (1985)zbMATHCrossRefGoogle Scholar
  58. 58.
    R. Kennedy, J. Padovan, Finite element analysis of a steady-state rotating tire subjected to a point load or ground contact. Tire Sci. Technol. 15(4), 243–260 (1987)CrossRefGoogle Scholar
  59. 59.
    J.T. Oden, T.L. Lin, On the general rolling contact problem for finite deformations of a viscoelastic cylinder. Comput. Meth. Appl. Mech. Eng. 57, 297–376 (1986)MathSciNetzbMATHCrossRefGoogle Scholar
  60. 60.
    U. Nackenhorst, On the finite element analysis of steady state rolling contact, in Contact Mechanics-Computational Techniques, ed. by M.H. Aliabadi, C.A. Brebbia (Computational Mechanics Publication, Southampton, Boston, 1993), pp. 53–60Google Scholar
  61. 61.
    U. Nackenhorst, The ALE-formulation of bodies in rolling contact—theoretical foundations and finite element approach. Comput. Meth. Appl. Mech. Eng. 193, 4299–4432 (2004)MathSciNetzbMATHCrossRefGoogle Scholar
  62. 62.
    M. Shiraishi et al., Simulation of dynamically rolling tire. Tire Sci. Technol. 28(4), 264–276 (2000)CrossRefGoogle Scholar
  63. 63.
    M. Koishi, Z. Shida, Multi-objective design problem of tire wear and visualization of its pareto solutions. Tire Sci. Technol. 34(3), 170–194 (2006)CrossRefGoogle Scholar
  64. 64.
    J.R. Cho et al., Abrasive wear amount estimate for 3D patterned tire utilizing frictional dynamic rolling analysis. Tribo. Int. 44, 850–858 (2011)CrossRefGoogle Scholar
  65. 65.
    A.R. Savkoor, On the friction of rubber. Wear 8, 222–237 (1965)CrossRefGoogle Scholar
  66. 66.
    K. Hofstetter et al., Sliding behaviour of simplified tire tread patterns investigated by means of FEM. Comp. Struct. 84, 1151–1163 (2006)CrossRefGoogle Scholar
  67. 67.
    A.G. Veith, A review of important factors affecting treadwear. Rubber Chem. Technol. 65, 601–659 (1992)CrossRefGoogle Scholar
  68. 68.
    A.G. Veith, Tire treadwear—the joint influence of compound properties and environmental factors. Tire Sci. Technol. 23(4), 212–237 (1995)CrossRefGoogle Scholar
  69. 69.
    T. Fujikawa, Tire tread wear prediction by rubber pad wear test (in Japanese). Nippon Gomu Kyokaishi 71, 154–160 (1998)CrossRefGoogle Scholar
  70. 70.
    T. Fujikawa et al., Tire wear caused by mild tread slip. Rubber Chem. Technol. 70, 573–583 (1997)CrossRefGoogle Scholar
  71. 71.
    K.A. Grosch, Correlation between road wear of tires and computer road wear simulation using laboratory abrasion data. Rubber Chem. Technol. 77, 791–814 (2002)CrossRefGoogle Scholar
  72. 72.
    A. Tomita, Technology for improvement on tire irregular wear (in Japanese). Nippon Gomu Kyokaishi 76, 52–57 (2003)CrossRefGoogle Scholar
  73. 73.
    K. Kato, K. Kadota, On development of the super-single drive (GMD) tyre, in 7th International Symposium Heavy Vehicle Weights & Dimensions, Delft, Netherlands, 2002Google Scholar
  74. 74.
    N. Wada et al., Effect of filled fibers and their orientations on the wear of short fiber reinforced rubber composites. Nippon Gomu Kyokaishi 66(8), 572–584 (1993)CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  1. 1.Department of Mechanical Science and Engineering, School of Advanced EngineeringKogakuin UniversityHachiojiJapan

Personalised recommendations