Advertisement

Design of a Highly Reliable and Reconfigurable Pulsed Latch Circuits

  • B. KeerthiEmail author
  • K. Ragini
Conference paper
Part of the Lecture Notes in Networks and Systems book series (LNNS, volume 65)

Abstract

Pulsed latches are the most important storage elements used in many VLSI circuits, due to their low area and power consumption. The pulsed latch circuit consists of a pulse generation circuit, which generates a pulsed clock signal and is given to its corresponding latches. Among different latches namely Modified Hybrid Pulsed Latch (MHLFF), Transmission Gate Pulsed Latch (TGPL), and Static Differential Pulsed Latch (SSASPL), the SSASPL has low power and delay and is used in all designs. The traditional pulse generation circuit used for the generation of the pulsed clock signal does not work well under different process, voltage and temperature (PVT) variations, so the reliability level is very less for these circuits. To enhance the reliability, two novel design approaches namely Header switch based pulsed latch (PL_SW) and MUX-based pulsed latch (PL_MUX) are designed and compared with the traditional pulsed latch in TANNER EDA tool using 180 nm technology.

Keywords

Pulsed latches Flip-flops PVT variations Low power 

References

  1. 1.
    Chinnery D, Keutzer K (2002) Closing the Gap between ASIC & Custom: tools and techniques for high-performance ASIC Design. Kluwer, NorwellGoogle Scholar
  2. 2.
    Stojanovic V, Oklobdzija V (1999) Comparative analysis of master-slave latches and flip-flops for high-performance and low-power systems. IEEE J Solid-State Circuits 34(4):536–548CrossRefGoogle Scholar
  3. 3.
    Baumann T et al (2007) Performance improvement of embedded low-power microprocessor cores by selective flip flop replacement. In: Proceedings of 33rd European solid state circuits conference (ESSCIRC), Sept 2007, pp 308–311Google Scholar
  4. 4.
    Paik S, Nam G-J, Shin Y (2011) Implementation of pulsed-latch and pulsed-register circuits to minimize clocking power. In: Proceedings of IEEE/ACM international conference on computer-aided design (ICCAD), Nov 2011, pp 640–646Google Scholar
  5. 5.
    Kousalya S, Sagar GVR (2015) Low power pulsed triggered flip-flop design with conditional pulse enhancement method. IOSR J VLSI Signal Process (IOSR-JVSP) 5(4):49–56Google Scholar
  6. 6.
    Partovi H et al (1996) Flow-through latch and edge-triggered flip-flop hybrid elements. In: IEEE international solid-state circuits conference (ISSCC), Digest of technical papers, Feb 1996, pp 138–139 Google Scholar
  7. 7.
    Elsharkasy WM, Khajeh A, Eltawil AM, Kurdahi FJ (2017) Reliability enhancement of low-power sequential circuits using reconfigurable pulsed latches. IEEE Trans Circuits Syst 64(7)CrossRefGoogle Scholar
  8. 8.
    Yang B-D (2015) Low-power and area-efficient shift register using pulsed latches. IEEE Trans Circuits Syst 62(6)MathSciNetCrossRefGoogle Scholar
  9. 9.
    Keerthi B, Ragini K (2018) Design of a low power and high speed 512-bit shift register using static differential sense amplifier shared pulsed latch circuit. IOSR J VLSI Signal Process (IOSR-JVSP) 8(2):38–43Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  1. 1.Department of ECEG. Narayanamma Institute of Technology and ScienceHyderabadIndia

Personalised recommendations