Advertisement

A New Synthesis Method of Hyperbranched Polyurethane Acrylate for Conductive Ink

  • Xinya Du
  • Qifeng Chen
  • Guangxue ChenEmail author
Conference paper
Part of the Lecture Notes in Electrical Engineering book series (LNEE, volume 543)

Abstract

Hyperbranched polyester polyols (HBPE) of second, third and forth generation were synthesized by procedures involving one step (HBPE-2), step by step (HBPE-3, HBPE-4). Based on the hyperbranched polymer chain extension method, a new type of hyperbranched polyurethane acrylate (HPUA) was obtained by the end-capping of HBPE with the obtained UA which was synthesized isophorone diisocyanate (IPDI), hydroxyethyl methacrylate (HEMA) and dibutyltin dilaurate (DBTL) at the reaction temperature of 70 °C. The characterization of the polysters was done by fourier transform infrared spectroscopy (FTIR), acid value, differential scanning calorimeter (DSC), isocyanata on solution, thermogravimetry (TG) and nuclear magnetic resonance (NMR). The results of DSC and TG showed that the glass transition temperature (Tg) of HBPE-3 and HPUA-3 were respectively 56.13 and 35.56 °C. The cold crystallization temperature (Tc) of HPUA-3 was 110.92 °C and melting temperature (Tm) was 134.74 °C. Therefore, both of them can be achieved under low temperature melting. Moreover, the introduction of a large number of unsaturated units in the end of HPUA can provide new ideas to UV curing resin. Finally, it gained good conductivity (8405 S/m) when it was applied to conductive inks.

Keywords

HBPE HPUA Conductive ink Resistivity 

Notes

Acknowledgements

This work was supported by the independent research project of state key laboratory of pulp and paper engineering, Guangzhou Science and Technology Plan Project (201607020045), the Science and Technology Project of Guangdong Province (No. 2017B090901064), school of Light Industry Science and Engineering Funding for Discipline Construction in 2018.

References

  1. 1.
    Malkoch, M., Claesson, H., Löwenhielm, P., Malmström, E., & Hult, A. (2004). Synthesis and characterization of 2, 2-bis (methylol) propionic acid dendrimers with different cores and terminal groups. Journal of Polymer Science Part A: Polymer Chemistry, 42(07), 1758–1767.CrossRefGoogle Scholar
  2. 2.
    Murillo, E., Vallejo, P., Sierra, L., & López, B. (2009). Characterization of hyperbranched polyol polyesters based on 2, 2-bis (methylol propionic acid) and pentaerythritol. Journal of Applied Polymer Science, 112(01), 200–207.CrossRefGoogle Scholar
  3. 3.
    Tan, H. M., & Luo, Y. J. (2004). Hyperbranched polymers. Beijing, China: Chemical Industry Press.Google Scholar
  4. 4.
    Huang, W. G., Su, L. J., & Bo, Z. S. (2009). Hyperbranched polymers with a degree of branching of 100% prepared by catalyst transfer Suzuki–Miyaura Polycondensation. Journal of the American Society, 131(30), 10348–10349.CrossRefGoogle Scholar
  5. 5.
    Scherf, U., & List, E. J. W. (2002). Semiconducting polyfluorenes—Towards reliable structure-property relationships. Advance Materials, 14(07), 477–487.CrossRefGoogle Scholar
  6. 6.
    Cheng, K. C., Don, T. M., Guo, W. J., & Chuang, T. (2002). Kinetic model of hyperbranched polymers formed by the polymerization of AB2 monomer with a substitution effect. Polymer, 43(23), 6315–6322.CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  1. 1.State Key Laboratory of Pulp and Paper EngineeringSouth China University of TechnologyGuangzhouChina

Personalised recommendations