Advertisement

Research on Carbon Footprint Analysis Model of Mechanical and Electrical Products from the Perspective of LCA

  • Hui ZhengEmail author
  • Yi-Fan Yan
Conference paper

Abstract

In light of the carbon footprint of mechanical and electronic products distribution, based on the whole life cycle, the product carbon footprint analysis model is established, the product system boundary is determined, inventory data at each stage of the life cycle is collected and analyzed, Carbon footprint calculation model is set up, Gabi software is applied to calculate product carbon footprint. Through the establishment of model sensitivity analysis, the influence factors of the sensitivity of the product carbon footprint is calculated and the key factors are extracted. Therefore, the method can reflect the whole life cycle of real product carbon footprint and follow-up low carbon design with feedback guidance. Finally, the feasibility and effectiveness of the proposed method were verified by the example of a transformer.

Keywords

Life cycle Carbon footprint Sensitivity analysis Uncertainty analysis Transformer 

References

  1. 1.
    L. Sun, Product structure regenerative design and feedback for low-carbon. Zhejiang University, 2014Google Scholar
  2. 2.
    X. Bian, S. Zhang. A review study of the carbon footprint. Environ. Prot. Recycl. Econ. 10, 16–18 (2010)Google Scholar
  3. 3.
    S. Ross, D. Evans, Use of cycle assessment in environmental management. Environ. Manag. 29(1), 132–142 (2002)Google Scholar
  4. 4.
    T. Yoshika, K. Aruga, T. Nitami, H. Kobayashi, H. Sakai, Energy and carbon dioxide balance of logging residues as alternative energy resources. System analysis based on the method of a life cycle inventory analysis. J. Forset Res. 10(2), 125–134 (April 2005)Google Scholar
  5. 5.
    J. Toby, T.A. Okrasinski, W. Schaeffer, Estimating the carbon footprint of telecommunications products a heuristic approach. J. Mech. Des., Trans. ASMS 132(9), 0945021–0945024 (2010)Google Scholar
  6. 6.
    X.F. Zhang, S.Y. Zhang, Z.Y. Hu et al., Identification of connection units with high GHG emissions for low-carbon product structure design. J. Clean. Prod.Google Scholar
  7. 7.
    G. Ameta, M. Mani, S. Rachuri et al., Carbon weight analysis for machining operation and allocation for redesign. Int. J. Sustain. Eng. 2(4), 241–251 (2009)Google Scholar
  8. 8.
    K.R. Haapala, K.N. Khadke, J.W. Sutherland, Predicting manufacturing waste and energy for sustainable product development via WE-Fab software. Proceedings Global Conference on Sustainable Product Development and life Cycle Engineering (September 29–October 1, 2004), pp. 243–250Google Scholar
  9. 9.
    C. Zhang, G. Pu, C. Wang, Comparison of Life Cycle Assessment Between E-bike and Motorbike. Machine Design and Research 04, 69–71 (2003). (In Chinese)Google Scholar
  10. 10.
    H. Bao, G. Liu, J. Wang, Optimal design of products with low-carbon footprint analysis. J. Comput.-Aided. Des. & Comput. Graph. 25(2), 264–272 (2013). (In Chinese)Google Scholar
  11. 11.
    Z. Deng, Study on carbon footprint analysis and assessment model of the model of the molded bra product in the production process. Xi’an University of Engineering, 2013. (In Chinese)Google Scholar
  12. 12.
    G. Jiang, The method of extension knowledge classification and its application in products low carbon design. Zhejiang University of Technology, 2014. (In Chinese)Google Scholar
  13. 13.
    J. Wang, Research on the method of calculation for carbon emissions based on life cycle assessment. Hefei Univ. Technol. (2012). (In Chinese)Google Scholar
  14. 14.
    H. Dai, P. Dai, Study on data collection and inventory analysis of life cycle assessment. Chongqing Technol. Bus. Univ. 03, 1–3 (2003). (In Chinese)Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  1. 1.College of Mechanical EngineeringTianjin University of Science and TechnologyTianjinPeople’s Republic of China
  2. 2.Tianjin Key Laboratory of Integrated Design and On-line Monitoring for Light Industry & Food Machinery and EquipmentTianjinPeople’s Republic of China

Personalised recommendations