Advertisement

Technology Precision Machining of Ceramic Balls in the V-Grooves of Variable Curvature

  • Oleg PasichnyiEmail author
Chapter
Part of the Springer Tracts in Mechanical Engineering book series (STME)

Abstract

Many industries employ a great variety of ball bearings, pumps, and other mechanisms, whose performance, service life, and reliability essentially depend on the quality of manufacture of precision ceramic balls. This chapter describes the traditional methods of processing precision balls, their advantages, and disadvantages in relation to the precision processing of ceramic balls. Several modern methods of precision machining of ceramic balls with the controlled position of the balls’ rotation axis during processing are considered and present a promising method of processing balls in guide V-grooves with variable curvature, which allows you to control both the quality and performance of processing. A mathematical model of processing balls with the variable position of the balls’ rotation axis is suggested. The mathematical model takes into account the forces, pressures, and wears of the guide V-grooves and allows determining the performance of the tool and assessing the quality of the balls surface coating by traces of processing. Examples of tools with guide V-grooves with variable curvature are shown, and the results of the proposed method of precision processing of boron carbide balls are given.

References

  1. 1.
  2. 2.
    Pasichnyi OO (2001) Theoretical analysis of spheres finishing process kinematics. Up-to-date processes of machining processing by instruments of SHM and quality of machines details surface. Collector of Scientifics works (series G). V. Bakul Institute for Superhard Materials of the NAS of Ukraine, Kiev, vol 179, pp 87–97Google Scholar
  3. 3.
    Pasichnyi OO (2000) Kinematic analysis of finishing process balls. Progressive technologies and systems of mechanical engineering. International digest of scientific works, DonNTU, Donetsk, vol 13, 272, pp 72–76Google Scholar
  4. 4.
    Feng KP, Zhou ZZ, Lv BH, Yuan JL (2013) Study on dual-plane ball polishing method for finishing ceramics ball. In: Advanced materials research. trans tech publications, vol 797, pp 444–449CrossRefGoogle Scholar
  5. 5.
  6. 6.
    Open image in new window (2013) High efficiency ultra-precision grinding of ceramic balls. Doctoral dissertation, Open image in new window Google Scholar
  7. 7.
    Kato K, Zhang B, Umehara N, Childs THC, Jones D (1994) Kinematics of balls in magnetic fluid grinding(predictions of the onset of skidding motion between balls and driving shaft). Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 60(572):1433–1439Google Scholar
  8. 8.
    Kirtane TS (2004) Finishing of silicon nitride (Si3N4) balls for advanced bearing applications by large batch magnetic float polishing (MFP) apparatus. Doctoral dissertation, Oklahoma State UniversityGoogle Scholar
  9. 9.
    Zhang B, Uematsu T, Nakajima A (1998) High efficiency and precision grinding of Si3N4 ceramic balls aided by magnetic fluid support using diamond wheels. JSME Int J Ser C 41(3):499–505CrossRefGoogle Scholar
  10. 10.
    Zhang B, Nakajima A (2003) Dynamics of magnetic fluid support grinding of Si3N4 ceramic balls for ultraprecision bearings and its importance in spherical surface generation. Precision Eng 27(1):1–8CrossRefGoogle Scholar
  11. 11.
    Zhang B, Umehara N, Kato K (1995) Effect of the eccentricity between the driving shaft and the guide ring on the behavior of magnetic fluid grinding of ceramic balls. J-Jpn Soc Precision Eng 61:586–586Google Scholar
  12. 12.
    Yuan JL, Tang KF, Wang ZW, Lv BH, He XH (2009) Lapping of WC-Co cemented carbide ball by eccentric dual-rotating V-groove lapping mode. In: Advanced Materials Research. Trans Tech Publications, vol 69, pp 287–290Google Scholar
  13. 13.
    Lv CC, Sun YL, Zuo DW (2015) A novel eccentric lapping method with two rotatable lapping plates for finishing cemented carbide balls. A A 2:2Google Scholar
  14. 14.
    Kang J, Hadfield M (2005) The polishing process of advanced ceramic balls using a novel eccentric lapping machine. Proce Inst Mech Eng Part B: J Eng Manuf 219(7):493–503CrossRefGoogle Scholar
  15. 15.
    Zhou F, Yuan J, Lyu B, Yao W, Zhao P (2016) Kinematics and trajectory in processing precision balls with eccentric plate and variable-radius V-groove. Int J Adv Manuf Technol 9(84):2167–2178CrossRefGoogle Scholar
  16. 16.
    Feng M, Wu Y, Yuan J, Ping Z (2017) Processing of high-precision ceramic balls with a spiral V-groove plate. Frontiers Mech Eng 12(1):132–142CrossRefGoogle Scholar
  17. 17.
    Shepelev AA, Pasichnyi OO (2000) A process of diamond machining of ball-shaped workpieces of structural ceramics. J Superhard Mater C/C Sverkhtverdye Mater 22(2):76–79Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  1. 1.V.N. Bakul Institute for Superhard MaterialsNational Academy of Science of UkraineKievUkraine

Personalised recommendations