Advertisement

Active and Passive Hybrid Vibration Isolation

  • Fei Wang
  • Zhenping Weng
  • Lin He
Chapter
Part of the Springer Tracts in Mechanical Engineering book series (STME)

Abstract

In this chapter, based on the Halbach magnetic array, the active and passive hybrid vibration isolation technology for WD618 diesel engine is studied. Firstly, the active and passive hybrid vibration isolators based on Halbach magnetic array is designed. The content includes design requirements, scheme design, and design method; design suitable power amplifier for isolators and verify whether the performance index requirements are met and test the resistance, inductance, stiffness, and static thrust of isolators; the vibration isolation effect of the vibration isolator was tested through a single-degree-of-freedom vibration isolation experiment.

References

  1. 1.
    Dickens JD, Norwood CJ (1996) Vibration isolator facility. Department of Defence, Defence Science and Technology OganisationGoogle Scholar
  2. 2.
    Goyder HGD, White RG (1980) Vibrational power flow from machines into built-up structures, part II: Wave propagation and power flow in beam-stiffened plates. J Sound Vib 68(1):77–96zbMATHCrossRefGoogle Scholar
  3. 3.
    Zhu HC, He L, Huo R et al (2002) Power flow analysis in designing the vibration isolation systems for marine main propulsion engines. In: National conference on vibration engineering and applicationsGoogle Scholar
  4. 4.
    Wu WP (2008) Study on active vibration control strategy of complex vibration isolation system. Shandong UniversityGoogle Scholar
  5. 5.
    Xie S, Or S W, Chan H L W, et al (2007) Analysis of vibration power flow from a vibrating machinery to a floating elastic panel. Mech Syst Signal ProcessGoogle Scholar
  6. 6.
    Yan JK, Shen MQ (1982) How to use vibration isolator. Noise Vib Control 6:3–9Google Scholar
  7. 7.
    Yan JK, Shen RY (1986) Isolator selection and layout. Noise Vib Control 3:60–65Google Scholar
  8. 8.
    Zhou XR (2009) Research on the installation technology of setting damper. J Jiangsu Teach Univ (Natural Science Edition) 3:47–52Google Scholar
  9. 9.
    Shu LH, Hu ZC, Lv ZQ (2006) Overseas research progress on vibration isolator. Ship Sci Technol 28(3):109–112Google Scholar
  10. 10.
    Song YC, Yu HL (2007) Research of optimum selection scheme of isolator. J Dalian Marit Univ 33(1):87–89Google Scholar
  11. 11.
    Gu NC, Zhang YS (2007) Study on the arrangement and installation of vibration isolators. Ship Eng 29(2):30–33Google Scholar
  12. 12.
    Song WY, Li ZH (2002) The research of parameters choice of double-stage vibration arrester system. J Liaoning Tech Univ (Natural Science) 21(1):46–48Google Scholar
  13. 13.
    Sun YH, Dong DW, Yan B et al (2013) Study on finite element modeling methods of two-stage vibration isolation system. Mach Des Manuf 1:244–247Google Scholar
  14. 14.
    Ma YT, Zhou Y (2008) Summary of floating raft system. Ship Sci Technol 30(4):22–26Google Scholar
  15. 15.
    Wang ZX (1986) Spring design manual. Shanghai Science and Technology Literature Publishing HouseGoogle Scholar
  16. 16.
    Zhao G, Liu J, Liu ZS (2010) Theoretical and experimental study on nonlinear dynamic model of a rubber isolator. J Vib Shock 29(1):173–177MathSciNetGoogle Scholar
  17. 17.
    Wang R, Li SQ, Song SY (2006) Research on serialization design method of rubber vibration isolators. Noise Vib Control 26(4):11–13Google Scholar
  18. 18.
    Wu HL, Dai HJ (2009) Application of finite element analysis in design and development of rubber isolators. Noise Vib Control 29(1):114–116MathSciNetGoogle Scholar
  19. 19.
    Shi F, Tong ZP, Gong LQ et al (2009) Prediction of aging life for rubber vibration isolator. Ship Eng 31(4):42–44Google Scholar
  20. 20.
    Zheng XL (1983) Rubber isolator applications. Rubber Ind Des 2:35–41Google Scholar
  21. 21.
    Miao JM (2010) Design of rubber vibration isolator of electric equipment in warship. Mach Manag Dev 25(3):28Google Scholar
  22. 22.
    Li YY (2009) Application of metal rubber isolator. Fly Missile 5:62–63Google Scholar
  23. 23.
    Zhao SP, Liu FM (1994) New isolator and its application in environmental engineering. Environ Sci 1:65–68Google Scholar
  24. 24.
    Richards CM, Singh R (2001) Characterization of rubber isolator nonlinearities in the context of single-and multi-degree-of-freedom experimental systems. J Sound Vib 247(5):807–834CrossRefGoogle Scholar
  25. 25.
    Kim BK, Youn SK, Lee WS (2004) A constitutive model and FEA of rubber under small oscillatory load superimposed on large static deformation. Arch Appl Mech 73(11):781–798zbMATHCrossRefGoogle Scholar
  26. 26.
    Lin CR, Lee YD (1998) Effects of viscoelasticity on rubber vibration isolator design. J Appl Phys 83(12):8027–8035CrossRefGoogle Scholar
  27. 27.
    Chavan VS, Askhedkar R, Sanap SB (2013) Analysis of anti vibration mounts for vibration isolation in diesel engine generator set. Int J Eng Res Appl (IJERA), 1423–1429Google Scholar
  28. 28.
    Xu W, He L, Lv ZQ et al (2007) Analysis of dynamic characteristics of shipboard airbag vibration isolation system. J Vib Shock 26(7):122–124Google Scholar
  29. 29.
    Xiang F (2001) Block-oriented nonlinear control of pneumatic actuator systems. MaskinkonstruktionGoogle Scholar
  30. 30.
    Chen LC (1984) Experimental investigation of active pneumatic suspensions. Massachusetts Institute of TechnologyGoogle Scholar
  31. 31.
    Zhou T, Liu QL (2007) Simplified model analysis of wire-rope vibration isolator. J Vib Shock 26(9):55–59Google Scholar
  32. 32.
    Shu LH, Zhou W, Lv ZQ et al (2006) Stainless steel wire-rope isolator used in vibration and impact isolation design for large machine equipment. J Vib Shock 25(4):78–81Google Scholar
  33. 33.
    Tao X (2009) Research on property for wire-rope vibration isolation. Mach Manuf Autom 38(4):22–23Google Scholar
  34. 34.
    Liu GP, Wang FM, Fan WX (1999) Experimentalal study on the dynamic characteristics of steel cable isolators. J Test Meas Technol NCIT 13(3):180–184Google Scholar
  35. 35.
    Mizuno T, Toumiya T, Takasaki M (2007) Vibration isolation system using negative stiffness. JSME Int J 73(4):418–421Google Scholar
  36. 36.
    Sciulli D (1997) Dynamics and control for vibration isolation design. Virginia Tech. DissertationGoogle Scholar
  37. 37.
    Giua A, Melas M, Seatzu C et al (2004) Design of a predictive semiactive suspension system. Veh Syst Dyn 41(4):277–300CrossRefGoogle Scholar
  38. 38.
    Shan SJ, He L (2006) Study on controllable damping semi-active impact isolation technology. J Vib Shock 25(5):144–147Google Scholar
  39. 39.
    Maciejewski I, Krzyżyński T (2011) Control design of semi-active seat suspension systems. In: Proceedings of the 5th working IEEE/IFIP conference on software architecture. IEEE Computer Society, pp 261–262Google Scholar
  40. 40.
    Ahuja AS, Gupta A (2014) Fuzzy logic controlled semi-active floating raft vibration isolation system. Univ J Mech Eng 2(4):142–147CrossRefGoogle Scholar
  41. 41.
    Bing Z et al (2015) The vibration isolation technologies of load in aviation and navigation. Int J Multimed Ubiquitous Eng 10(12):19–26CrossRefGoogle Scholar
  42. 42.
    Jian-ye D, Yi Z, Hongxing H (2005) The application of mixed passive-active control technique to ship equipment vibration isolation and noise reduction: a review. In: Twelfth international congress on sound and vibrationGoogle Scholar
  43. 43.
    Huang QF (2010) Analysis of the whole vibration process for AVS structural control system. J Huaqiao Univ (Natural Science) 31(1):83–87MathSciNetGoogle Scholar
  44. 44.
    Long ZQ, Hao AM, Chen G et al (2003) The research of active isolation platform with magnetically levitated control. J Astronaut 24(5):510–514Google Scholar
  45. 45.
    Hoque ME, Takasaki M, Ishino Y et al (2006) Development of a three-axis active vibration isolator using zero-power control. IEEE/ASME Trans Mechatron 11(4):462–470CrossRefGoogle Scholar
  46. 46.
    Yang P, Liu F, Liu Y, et al (2008) Computer-aided design integration of a reinforced vibration isolator for electronic equipment’s system based on experimental investigation. Struct Multidiscip Optim 35(5):489–498CrossRefGoogle Scholar
  47. 47.
    He L, Li Y, Shuai C (2015) Active-passive vibration isolation for ship machinery using electromagnetic actuator and air spring. In: ICSVGoogle Scholar
  48. 48.
    Hoque ME, Takasaki M, Ishino Y et al (2006) An active micro vibration isolator with zero-power controlled magnetic suspension technology. JSME Int J Ser C Mech Syst Mach Elem Manuf 49(3):719–726CrossRefGoogle Scholar
  49. 49.
    Lin H, McInroy JE (2003) Adaptive sinusoidal disturbance cancellation for precise pointing of Stewart platforms. IEEE Trans Control Syst Technol 11(2):267–272Google Scholar
  50. 50.
    El-Sinawi AH (2004) Active vibration isolation of a flexible structure mounted on a vibrating elastic base. J Sound Vib 271(1):323–337CrossRefGoogle Scholar
  51. 51.
    Baig RU, Pugazhenthi S (2015) Design optimization of Stewart platform configuration for active vibration isolation. Indian J Sci Technol 8(23)Google Scholar
  52. 52.
    Liu YG, Zhang L, Fu YL et al (2004) A new adaptive feedforward active vibration isolation control technology. In: China Aviation Society annual conference on control and applicationGoogle Scholar
  53. 53.
    Chen B (2008) Floating isolation system modeling and active vibration control. University of Science and Technology of ChinaGoogle Scholar
  54. 54.
    Li KQ (2008) Application of 6-RSS parallel mechanism in six-dimensional active vibration reduction platform. Beijing Jiaotong UniversityGoogle Scholar
  55. 55.
    Yoshioka H, Murai N (2002) An active microvibration isolation system. J Vib Acoust 123(2):269–275Google Scholar
  56. 56.
    Muller T et al (2005) Modelling and control techniques of an active vibration isolation system. In: IMAC-XXIIIGoogle Scholar
  57. 57.
    Singh R, Kim S (2003) Examination of multi-dimensional vibration isolation measures and their correlation to sound radiation over a broad frequency range. J Sound Vib 262(3):419–455CrossRefGoogle Scholar
  58. 58.
    Aso Y (2008) Active vibration isolation for a laser interferometric gravitational wave detector using a suspension point interferometer. Ph.D. thesis, University of TokyoGoogle Scholar
  59. 59.
    Arias-Montiel M, Silva-Navarro G, Antonio-García A (2014) Active vibration control in a rotor system by an active suspension with linear actuators. J Appl Res Technol 12(5):898–907CrossRefGoogle Scholar
  60. 60.
    Ahn KK (2014) Active pneumatic vibration isolation system using negative stiffness structures for a vehicle seat. J Sound Vib 333(5):1245–1268Google Scholar
  61. 61.
    Jansson F, Johansson O (2003) A study of active engine mounts. Linköpings universitet, SwedenGoogle Scholar
  62. 62.
    Hassan Aly S (1968) Fundamental studies of passive, active and semi-active automotive suspension systems. University of LeedsGoogle Scholar
  63. 63.
    Widrow B, Hoffman M (1960) Adaptive switching circuits. In: Proceedings of the IRE WESCON convention record, Part 4, Session 16, pp 96–104Google Scholar
  64. 64.
    Beltran-Carbajal F, Silva-Navarro G, Abundis-Fong HF (2015) Application of passive/active duffing vibration absorbers in duffing mechanical systems. In: ICSV22Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  1. 1.China Ship Scientific Research CenterWuxiChina
  2. 2.Wuhan Second Ship Design and Research InstituteWuhanChina
  3. 3.Institute of Vibration and Noise ResearchWuhanChina

Personalised recommendations