Advertisement

Lighting Systems

  • Pranab Kumar Nag
Chapter
Part of the Design Science and Innovation book series (DSI)

Abstract

Selection of the lighting system, namely general lighting, directional lighting, localized, and local lighting, is to make the task area illuminated as uniformly as possible. This chapter describes the factors involved in the selection of light sources, including incandescent lamps, fluorescent/high-intensity discharge lamps, and light-emitting diodes, used in offices and commercial establishments. Details include the type of lamp, power consumption, luminous flux and efficacy, light colour, colour rendering, and base of the lamp. There are issues with lighting controls, such as localized manual controls, time controls, occupancy controls, movement about a building, photoelectric switching, dimming controls, and emergency lightings. The chapter includes a multitude of lighting-related standards that are categorized as lighting energy, lighting design, indoor lighting, workplace-specific lighting, emergency lighting, outdoor lighting, and lighting standards for industries. The chapter compiles energy and lighting software (such as DOE-2, EnergyPlus, DeST), which have been practiced to predict daylighting, electrical lighting performance, energy simulation, thermal performance of buildings, design energy efficient building envelopes and HVAC systems and depict compliance of building energy codes.

References

  1. ADELINE, Advanced Day and Electric Light New Environment (version 2.0), http://radsite.lbl.gov/adeline/home.htm.
  2. AGi32. (2012). Lighting Analysts, V2.3. www.agi32.com.
  3. Aldawoud, A. (2013). The influence of the atrium geometry on the building energy performance. Energy and Buildings, 57, 1–5.CrossRefGoogle Scholar
  4. ANSI/ASHRAE 140-2007. Standard method of test for the evaluation of building energy analysis computer programs. Atlanta, USA: American Society of Heating, Refrigerating and Air-Conditioning Engineers.Google Scholar
  5. ANSI/IES/ASHRAE (2007/2010/2013/2016). 90.1-2016 (I-P)—Energy Standard for Buildings Except Low-Rise Residential Buildings; Atlanta. http://www.ashrae.org.
  6. ANSI/IESNA RP-1-12: Office Lighting.Google Scholar
  7. ANSI/IESNA RP-29-06: Lighting for Hospitals and Health Care Facilities.Google Scholar
  8. ANSI/IESNA RP-3-13: American National Standard Practice on Lighting for Educational Facilities.Google Scholar
  9. ANSI/IES-RP-28-16: (2007/2016) Lighting and the Visual Environment for Senior Living.Google Scholar
  10. AS 1680.2.0—1990, Interior lighting, Part 2.0—Recommendations for specific tasks and interiors.Google Scholar
  11. AS 4934.2-2011. Incandescent lamps for general lighting services—Minimum Energy Performance Standards (MEPS) requirements.Google Scholar
  12. AS/NZS 1680.0:2009. Interior lighting—Safe movement.Google Scholar
  13. AS/NZS 1680.1:2006. Interior and workplace lighting—General principles and recommendations.Google Scholar
  14. AS/NZS 1680.2.1:2008. Interior and workplace lighting—Specific applications—Circulation spaces and other general areas.Google Scholar
  15. AS/NZS 1680.2.2:2008. Interior and workplace lighting—Specific applications—Office and screen-based tasks.Google Scholar
  16. AS/NZS 1680.2.3:2008. Interior and workplace lighting—Specific applications—Educational and training facilities.Google Scholar
  17. AS/NZS 1680.2.4:1997. Interior lighting—Industrial tasks and processes.Google Scholar
  18. AS/NZS 1680.5:2012. Interior and workplace lighting—Outdoor workplace lighting.Google Scholar
  19. AS/NZS 2293.1:1998. Emergency evacuation lighting for buildings—System design, installation and operation.Google Scholar
  20. AS/NZS 2293.2:1995. Emergency evacuation lighting for buildings—Inspection and maintenance.Google Scholar
  21. AS/NZS 2293.3:1995. Emergency evacuation lighting for buildings—Emergency luminaires and exit signs.Google Scholar
  22. AS/NZS 4282-1997. Control of the obtrusive effects of outdoor lighting.Google Scholar
  23. AS/NZS 4783.1:2001 (R2013). Performance of electrical lighting equipment ballasts for fluorescent lamps—Method of measurement to determine energy consumption and performance of ballasts lamp circuits.Google Scholar
  24. AS/NZS 4783.2:2002 (R2013). Performance of electrical lighting equipment Ballasts for fluorescent lamps—Energy labelling and minimum energy performance.Google Scholar
  25. AS/NZS 4847.1:2010. Self ballasted lamps for general lighting services—Test methods—Energy performance.Google Scholar
  26. ASAE EP344.4:2014: Lighting Systems for Agricultural Facilities.Google Scholar
  27. Baker, N., Fanchiotti, A., & Steemers, K. (1993). Daylighing in architecture—a European reference book. Commission of the European Communities, Directorate–General XII for Science Research and Development. Research and Development, James & James Ltd, London.Google Scholar
  28. Bhavani, R. G., & Khan, M. A. (2011). Advanced lighting simulation tools for daylighting purpose: powerful features and related issues. Trends in Applied Sciences Research, 6(4), 345.CrossRefGoogle Scholar
  29. BLAST. (1991). BLAST user reference (Vols. 1, 2). Urbana, USA: University of Illinois.Google Scholar
  30. Bodart, M., & De Herde, A. (2002). Global energy savings in offices buildings by the use of daylighting. Energy and Buildings, 34(5), 421–429.CrossRefGoogle Scholar
  31. Boyce, P. R., Veitch, J. A., Newsham, G. R., Jones, C. C., Heerwagen, J., Myer, M., et al. (2006a). Occupant use of switching and dimming controls in offices. Lighting Research & Technology, 38(4), 358–376.CrossRefGoogle Scholar
  32. Boyce, P. R., Veitch, J. A., Newsham, G. R., Jones, C. C., Heerwagen, J., Myer, M., et al. (2006b). Lighting quality and office work: Two field simulation experiments. Lighting Research & Technology, 38(3), 191–223.CrossRefGoogle Scholar
  33. BS 5266-1:2016, Emergency lighting. Code of practice for the emergency lighting of premises.Google Scholar
  34. BS 5266-2:1998: Emergency lighting. Code of practice for electrical low mounted way guidance systems for emergency use.Google Scholar
  35. BS 5266-4:1999: Emergency lighting. Code of practice for design, installation, maintenance and use of optical fibre systems.Google Scholar
  36. BS 5266-5:1999: Emergency lighting. Specification for component parts of optical fibre systems.Google Scholar
  37. BS 5266-6:1999: Emergency lighting. Code of practice for non-electrical low mounted way guidance systems for emergency use. Photo luminescent systems.Google Scholar
  38. BS 8206-2:2008: Lighting for buildings. Code of practice for daylighting.Google Scholar
  39. Chen, Y., Gu, L., & Zhang, J. (2015). EnergyPlus and CHAMPS-Multizone co-simulation for energy and indoor air quality analysis. Building Simulation, 8(4), 371–380.CrossRefGoogle Scholar
  40. China: GB 50034-2004 Standard for lighting design of buildings.Google Scholar
  41. CIE 097:2005: Maintenance of Indoor Electric Lighting Systems, 2nd Edition, Commission Internationale de l’Eclairage, ISBN: 9783901906459.Google Scholar
  42. CIE 161:2004, Lighting Design Methods for Obstructed Interiors, Commission Internationale de l’Eclairage, ISBN: 9783901906329.Google Scholar
  43. CIE 184:2009, Indoor Daylight Illuminants, Commission Internationale de l’Eclairage, ISBN: 9783901906749.Google Scholar
  44. CIE S 004/E-2001: Colours of Light Signals. Commission Internationale de l’Eclairage.Google Scholar
  45. CIE S 008/E: 2001/ISO 8995-1:2002, Lighting of Work Places—Part 1: Indoor; Commission Internationale de l’Eclairage.Google Scholar
  46. CIE/IEC 62471:2006/CIE S 009:2002: Photobiological Safety of Lamps and Lamp Systems.Google Scholar
  47. Daysim, Advanced Daylight Simulation Software, http://daysim.ning.com/.
  48. DIALux (2012, V 4.10); DIAL GmbH. www.dial.de.
  49. Doulos, L., Tsangrassoulis, A., & Topalis, F. (2008). Quantifying energy savings in daylight responsive systems: The role of dimming electronic ballasts. Energy and Buildings, 40(1), 36–50.CrossRefGoogle Scholar
  50. EC, Regulation 244/2009, March 18th, 2009 implementing Directive 2005/32/EC, regarding eco-design requirements for non-directional household lamps.Google Scholar
  51. EC, Regulation 245/2009, March 18th, 2009 implementing Directive 2005/32/EC, regarding eco-design requirements for fluorescent lamps without integrated ballast, for high intensity discharge lamps, and for ballasts and luminaires able to operate such lamps, and repealing Directive 2000/55/EC.Google Scholar
  52. Elum Tools. (July 2012, V 2013 R1). Lighting Analysts. www.elumtools.com.
  53. EN 12464-1: 2002/2011, Light and lighting—Lighting of work places—Part 1: Indoor work places, European Committee for Standardization, Bruxelles.Google Scholar
  54. EN 12464-2:2014: Light and lighting. Lighting of work places. Outdoor work places. European Committee for Standardization.Google Scholar
  55. EN 15193-1: 2007: Energy performance of buildings—Energy requirements for lighting, Part 1: Lighting energy estimation. European Committee for Standardization.Google Scholar
  56. EN 15251 (2007). Indoor Environmental Input Parameters for Design and Assessment of Energy Performance of Buildings — Addressing Indoor Air Quality, Thermal Environment, Lighting and Acoustics, CEN, Brussels.Google Scholar
  57. EN 1838-2013: Lighting applications. Emergency lighting. European Committee for Standardization.Google Scholar
  58. EN 40-3-1:2013: Lighting columns. Design and verification. Specification for characteristic loads. European Committee for Standardization.Google Scholar
  59. EN 40-3-2:2013: Lighting columns. Design and verification. Verification by testing. European Committee for Standardization.Google Scholar
  60. EN 40-3-3:2013: Lighting columns. Design and verification. Verification by calculation. European Committee for Standardization.Google Scholar
  61. EN 50172-2004: Emergency escape lighting systems. European Committee for Standardization.Google Scholar
  62. EnergyGauge Summit, ver. 6.0.00, 2017. http://www.energygauge.com.
  63. EnergyPlus, ver. 8.6.0, 2016. U.S. Department of Energy’s (DOE) Building Technologies Office; managed by the National Renewable Energy Laboratory (NREL).Google Scholar
  64. EnergyPro, ver. 7.2.2, 2018. http://www.energysoft.com.
  65. eQUEST (the QUick Energy Simulation Tool), Ver. 3.65, 2016. http://www.doe2.com/equest/.
  66. Erhorn, H., De Boer, J., & Dirksmöller, M. (1997). ADELINE–An integrated approach to lighting simulation. Proceedings of IBPSA Building Simulation’97, 1, 79-85.Google Scholar
  67. Galasiu, A. D., Newsham, G. R., Suvagau, C., & Sander, D. M. (2007). Energy saving lighting control systems for open-plan offices: a field study. Leukos4(1), 7–29. (online, 2013).Google Scholar
  68. Grather M. (2009). The evaluation of flicker in LED luminaires. http://www.cormusa.org/uploads/CORM 2009—The Evaluation of Flicker in LED luminaires Grather.pdf.
  69. ICEL 1006:2013, Emergency Lighting Design Guide.Google Scholar
  70. IEC 60598-2-22:2014, Luminaires—Part 2-22: Particular requirements—Luminaires for emergency lighting.Google Scholar
  71. IES DG-10-12, Design Guide for Choosing Light Sources for General Lighting.Google Scholar
  72. IES DG-18-08, Light + Design—A Guide to Designing Quality Lighting for People and Buildings.Google Scholar
  73. IES LEM-3-13, IES Guidelines for Upgrading Lighting Systems in Commercial and Institutional Spaces.Google Scholar
  74. IES RP-6-15, Sports and Recreational Area Lighting.Google Scholar
  75. IES TM-15-11, Luminaire Classification System for Outdoor Luminaires.Google Scholar
  76. IES/NALMCO RP-36-15, Recommended Practice for Lighting Maintenance.Google Scholar
  77. IESNA G-1-03, Guideline on Security Lighting for People, Property, and Public Spaces. Illuminating Engineering Society of North America.Google Scholar
  78. IESNA. (1997). 1997 IESNA Software Survey. Lighting design + application (Vol. 11, No. 7, pp. 41–50). Illuminating Engineering Society of North America.Google Scholar
  79. India: IS 3646 (Part 1):1992, Code of practice for interior illumination: Part 1 General requirements and recommendations for working interiors.Google Scholar
  80. India: Bureau of Indian Standards, NATIONAL BUILDING CODE OF INDIA (NBC 2016).Google Scholar
  81. India: National Building Code (NBC 2005), Part 8, Section 1, Lighting and Ventilation.Google Scholar
  82. ISO 11664-2: 2008(E)/CIE S 014-2/E: 2006 Colorimetry—Part 2: CIE standard illuminants.Google Scholar
  83. ISO 30061-2007(E)/CIE S 020/E-2007: Emergency Lighting.Google Scholar
  84. ISO 8995-3:2006(E)/CIE S 016/E:2005. Lighting of Work Places—Part 3: Lighting Requirements for Safety and Security of Outdoor Work Places.Google Scholar
  85. Japan: JIES-008 (1999)—Indoor Lighting Standard.Google Scholar
  86. Larson W. G., & Shakespeare, R. (1998). Rendering with radiance: The art and science of lighting visualization. San Francisco, CA: Morgan Kaufman.Google Scholar
  87. Li, D. H., & Wong, S. L. (2007). Daylighting and energy implications due to shading effects from nearby buildings. Applied Energy, 84(12), 1199–1209.CrossRefGoogle Scholar
  88. Li, D. H., Lam, J. C., & Wong, S. L. (2005). Daylighting and its effects on peak load determination. Energy, 30(10), 1817–1831.CrossRefGoogle Scholar
  89. Licaso, Lighting Analysts. https://lightinganalysts.com/licaso/.
  90. LightScape, Lightscape Technologies, Inc., San Jose, CA. www.lightscape.com.
  91. Lumen Micro V7.5. (1998), Lighting Technologies Inc., Boulder, CO. www.lightingtechnologies.com.
  92. Mitchell, W. J. (1992). The reconfigured eye, visual truth in the post-photographic era. Cambridge, MA: The MIT Press.Google Scholar
  93. NEMA LE 6-2014, Procedure for determining target efficacy ratings for commercial, industrial, and residential luminaires.Google Scholar
  94. Ochoa, C. E., Aries, M. B., & Hensen, J. L. (2012). State of the art in lighting simulation for building science: A literature review. Journal of Building Performance Simulation, 5(4), 209–233.CrossRefGoogle Scholar
  95. OptiWin (2009, V 2008.3). www.glamox-international.com.
  96. Paule, B., Scartezzini, J. L., & Citherlet, S. (1998). LESO-DIAL Daylighting Design Software. In Proceedings of the International Daylighting Conference, 1998 Ottawa, (pp. 29–36).Google Scholar
  97. Radiance. (2011, V 4.1). Lawrence Berkeley Laboratory. www.radsite.lbl.gov.
  98. Reinhart, C. F. (2006). Tutorial on the use of DAYSIM simulations for sustainable design. Institute for Research in Construction, National Research Council Canada. Ottawa (Ont.).Google Scholar
  99. Relux. (2012, V 2). Relux Informatik AG. www.relux.biz.
  100. Russia: SNiP 23-05-95, Russian Federation Construction Standards and Rules: Daylight and Artificial Lighting (1995). Published in Light & Engineering (Vol. 3, No. 4, pp. 1–28). New York: Allerton Press, Inc.Google Scholar
  101. SAE ARP 1161A-2004, Crew Station Lighting—Commercial Aircraft.Google Scholar
  102. Shailesh, K. R., & Tuneja, R. S. (2010). Application of RELUX software in simulation and analysis of energy efficient lighting scheme. International Journal of Computer Applications, 9(7), 24–35.CrossRefGoogle Scholar
  103. South Africa. SANS 10114-1, 2005, Code of Practice for Interior Lighting.Google Scholar
  104. SuperLite IEA 1.0, IEA Task 21, SuperLite, Lawrence Berkeley National Laboratory.Google Scholar
  105. USA: NECA/ANSI 409-2015, Standard for Installing and Maintaining Dry-Type Transformers.Google Scholar
  106. USA: NECA/IESNA 501-2006, Standard for Installing Exterior Lighting Systems (ANSI); (outdoor applications on and near commercial, institutional, industrial, and storage buildings).Google Scholar
  107. USA: NECA/IESNA 502-2006, Standard for Installing Industrial Lighting Systems (ANSI); (industrial and storage buildings).Google Scholar
  108. Visual. (2016). Acuity Brands Lighting. www.acuitybrandslighting.com.
  109. VisualDOE. (2004). VisualDOE 4.0 User Manual, March, 2004. Architectural Energy Corporation, USA.Google Scholar
  110. Yan, D., Xia, J., Tang, W., Song, F., Zhang, X., & Jiang, Y. (2008). DeST—An integrated building simulation toolkit Part I: Fundamentals. Building Simulation, 1, 95–110.CrossRefGoogle Scholar
  111. Yang, I. H., & Nam, E. J. (2010). Economic analysis of the daylight-linked lighting control system in office buildings. Solar Energy, 84(8), 1513–1525.CrossRefGoogle Scholar
  112. Yi, R., Shao, L., Su, Y., & Riffat, S. (2009). Daylighting performance of atriums in subtropical climate. International Journal of Low-Carbon Technologies, 4(4), 230–237.CrossRefGoogle Scholar
  113. Zhu, D., Hong, T., Yan, D., & Wang, C. (2013). A detailed loads comparison of three building energy modeling programs: EnergyPlus, DeST and DOE-2.1 E. In Building simulation (Vol. 6, No. 3, pp. 323–335). Tsinghua University Press.Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  • Pranab Kumar Nag
    • 1
  1. 1.School of Environment and Disaster ManagementRamakrishna Mission Vivekananda UniversityKolkataIndia

Personalised recommendations