Advertisement

The Hardware System Based on Wi-Fi Failure Prevention System for Photovoltaic Arrays

  • Jili Ren
  • Fuzhong Wang
  • Sumin Han
Conference paper
Part of the Lecture Notes in Electrical Engineering book series (LNEE, volume 528)

Abstract

Real-time online monitoring the working status of the photovoltaic array and warning potential faults will play a crucial role in the safe operation of the photovoltaic power generation system. This paper presents a hardware system which is based on Wi-Fi failure prevention system of photovoltaic arrays. The collected data from each collecting node are transmitted to the STM32 chip to process and analysis. The system achieves the data transmission between the upper computer and the lower computer through the Wi-Fi technology and accomplish the real-time monitoring the working status of the photovoltaic array by the upper computer. The test results show that the system is not only stable but also reliable and it can monitor the working environment and status of the photovoltaic array in real time accurately.

Keywords

Wi-Fi Hardware design STM32 control chip Data acquisition Fault early warning 

References

  1. 1.
    W. Chen, X. Ai, T. Wu et al., A review of the influence of photovoltaic grid-connected power generation system on the power grid. Elect. Power Autom. Equip. 33(02), 26–32 (2013)Google Scholar
  2. 2.
    R. Wu, Z. Li, Hardware circuit design of solar photovoltaic cell testing system. Autom. Instrum. 03, 156–157 (2010)Google Scholar
  3. 3.
    G. Yang, Z. Yang, Q. Peng et al., Hardware design of concentrator for power information acquisition system. Autom. Electr. Power Syst. 34(09), 106–108 (2010)Google Scholar
  4. 4.
    F. Shariff, N.A. Rahim, W.P. Hew, Zigbee-based data acquisition system for online monitoring of grid-connected photovoltaic system. Expert Syst. Appl. 42(3) (2015)Google Scholar
  5. 5.
    J. Liu, Application of WiFi technology in remote temperature and humidity monitoring system. Autom. Instrum. 39(06), 79–82 (2014)Google Scholar
  6. 6.
    Z. Zhou, C. Wu, Z. Yang et al., Sensorless sensing with WiFi. Tsinghua Sci. Technol. 20(01), 1–6 (2015)CrossRefGoogle Scholar
  7. 7.
    L. Zeng, H. Zhang, H. Weiyan, Design and implementation of wireless measurement and control system based on WiFi. Electr. Measur. Instrum. 48(07), 81–83 (2011)Google Scholar
  8. 8.
    Y. Jia, Robust control with decoupling performance for steering and traction of 4WS vehicles under velocity-varying motion. IEEE Trans. Control Syst. Technol. 8(3), 554–569 (2000)Google Scholar
  9. 9.
    Y. Wang, Wireless data acquisition system based on STM32. Instrum. Technol. Sens. 03, 64–66 (2018)Google Scholar
  10. 10.
    Y. Jia, Alternative proofs for improved LMI representations for the analysis and the design of continuous-time systems with polytopic type uncertainty: a predictive approach. IEEE Trans. Autom. Control 48(8), 1413–1416 (2003)Google Scholar
  11. 11.
    A. Vijayakumari, A.T. Devarajan, N. Devarajan, Design and development of a model-based hardware simulator for photovoltaic array. Int. J. Electr. Power Energy Syst. 43(1) (2012)Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  1. 1.School of Electrical Engineering and AutomationHenan Polytechnic UniversityJiaozuoChina

Personalised recommendations