Advertisement

An Analytical Solution for Large Displacements of End-Loaded Beams

  • Christian Iandiorio
  • Pietro Salvini
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

The paper presents a closed-form analytical solution for the finite displacement analysis of cantilever beams end-loaded, having an unvarying section. Extension to supported beams loaded at the middle point is obvious. The solution accounts of slender beams, so that shear deformation effect is neglected. Material elasticity holds. Concentrated end loads are considered within the solution. Several former approaches to this classical problem can be found in the scientific literature. Typical methods provides an integral form, solved by means of incomplete elliptic functions. Alternatively, a massive number of numerical integrations techniques have been proposed, such as “Non linear shooting method”, “Automatic Taylor expansion technique (ATET)”, “Runge-Kutta method”, etc.

In the present paper, the solution is gained through a parametric representation of the average line of the bending beam, after an expansion based on Gaussian hypergeometric functions. One of the main advantage is that an end-to-end analysis is possible, thus avoiding the integration throughout the full length of the beam. The method considers straight lines as well as circular shaped lines; the way to shift between the two cases is suggested within the paper. The reference system to get an easier solution of the integrals is taken so that it is aligned with the resulting load applied. Graphic presentations of some examples compare the analytic solutions here provided with numerical solutions, finite element method results and an experimental evidence.

Keywords

Large displacements beams Hypergeometric series Analytic solution 

References

  1. 1.
    Hodges, D.H., Orniston, R.A.: Stability of elastic bending and torsion of uniform cantilever rotor blades in hover with variable structural coupling. National Aeronautics and space administration (NASA), Washington D.C (1976)Google Scholar
  2. 2.
    Truesdell, C., Euler, L.: The Rational Mechanics of Flexible or Elastic Bodies 1638-1788. Birkhäuser, Basel (1960)CrossRefGoogle Scholar
  3. 3.
    Barten, H.J.: On the deflection of a cantilever beam. Q. Appl. Math. 2, 168–171 (1944)MathSciNetCrossRefGoogle Scholar
  4. 4.
    Bisshop, K.E., Drucker, D.C.: Large deflection of cantilever beams. Q. Appl. Math. 3, 272–275 (1945)MathSciNetCrossRefGoogle Scholar
  5. 5.
    Banerjee, A., Bhattacharya, B., Mallik, A.K.: Large deflection of a cantilever beams with geometric non-linearity: analytical and numerical approaches. Int. J. Non-Linear Mech. 43, 366–376 (2008)CrossRefGoogle Scholar
  6. 6.
    Tari, H.: On a parametric large deflection study of Euler-Bernoulli cantilever beams subjected to a combined tip point loading. Int. J. Non-Linear Mech. 49, 90–99 (2013)CrossRefGoogle Scholar
  7. 7.
    Shvartsman, B.S.: Analysis of large deflections of a curved cantilever subjected to a tip-concentrated follower force. Int. J. Non-Linear Mech. 50, 75–80 (2013)CrossRefGoogle Scholar
  8. 8.
    Nallathambi, A.K., Lakshmana Rao, C., Srinivasan, S.M.: Large deflection of a constant curvature cantilever beam under follower load. Int. J. Mech. Sci. 52, 440–445 (2010)CrossRefGoogle Scholar
  9. 9.
    Reissner, E.: On one dimensional finite strain beam theory: the plane problem. J. Appl. Math. Phys. 23, 795–804 (1972)zbMATHGoogle Scholar
  10. 10.
    Carlson, B.C.: Some series and bounds for incomplete elliptic integrals. J. Math. Phys. 40, 125–134 (1961)MathSciNetCrossRefGoogle Scholar
  11. 11.
    Landau, L.: Theory of elasticity, translated from Russian by J.B. Sykes and W.H. Elsevier Reid, Pergamon Press, London (1959)Google Scholar
  12. 12.
    Frish-Fay, R.: Flexible Bars. Butterworths, London (1962)zbMATHGoogle Scholar
  13. 13.
    Belluzzi, O.: Scienza delle costruzioni, vol. 4. Zanichelli, Bologna (1998)zbMATHGoogle Scholar
  14. 14.
    Timoshenko, S., Gere, J.M.: Theory of Elastic Stability. McGraw Hill, New York (1963)Google Scholar
  15. 15.
    Jairazbhoy, V.A., Petukhov, P., Qu, J.: Large deflection of thin plates in convex or concave cylindrical bending. J. Eng. Mech. 138, 230–234 (2011)CrossRefGoogle Scholar
  16. 16.
    Bona, F., Zelenika, S.: A generalized elastica-type approach to the analysis of large displacements of spring-strips. J. Mech. Eng. Sci. 211, 509–517 (1997)CrossRefGoogle Scholar
  17. 17.
    Visner, J.C.: Analytical and experimental analysis of the large deflection of a cantilever beam subjected to a constant, concentrated force, with constant angle, applied at the free end. A thesis presented to the graduate faculty of the university of akron (2007)Google Scholar
  18. 18.
    Howell, P.D., Kozyreff, G., Ockendon, R.: Applied Solid Mechanics. Cambridge University Press, New York (2009)zbMATHGoogle Scholar
  19. 19.
    Magnus, W., Oberhettinger, F., Tricomi, F.G.: Higher Trascendental Functions, vol. 1. McGraw-Hill, New York (1953)Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  1. 1.Department of Enterprise EngineeringUniversity of Rome “Tor Vergata”RomeItaly

Personalised recommendations