Advertisement

CFD Modelling of Pipe Erosion Due to Sand Transport

  • Oluwademilade Adekunle Ogunsesan
  • Mamdud Hossain
  • Draco Iyi
  • Mohamed Ghazi Dhroubi
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

Erosion caused by sand particles is a serious problem facing the oil and gas industry. Predicting pipe erosion due to sand transport is a complex process in multiphase flows due to the complex nature of the flow. Existing erosion studies are however focused on single phase flow conditions which are conservative and could lead to under-/over-engineering because actual fluid flow in pipelines is multiphase. There is therefore a need for in-depth analysis of the complex interaction between the multiphase fluid and transported sand particles.

This study employs CFD modelling techniques to investigate the complex interactions between the multiphase fluid and transported sand particles in pipes, and the subsequent effect on pipe erosion rate and location under varying operating conditions. In view of this, the Eulerian Multifluid-VOF Model coupled with Interfacial Area Transport Equations have been employed to simulate air-water two phase flow and the result shows good agreement with experimental data.

This fluid flow results have been employed in investigating sand erosion in multiphase flow through pipes. The Eulerian Multifluid-VOF model has been coupled with the Lagrangian framework for particle tracking and an appropriate erosion correlation has been employed to predict the pipe erosion rate. The pipe was observed to erode more 45° into the elbow and maximum erosion rate is 4.028e–6 kg/m2s. These results are in acceptable range when compared to available data. Erosion rate was also observed to be transient.

Keywords

Erosion Erosion rate Multiphase flow CFD 

References

  1. 1.
    Shoham, O.: Mechanistic Modelling of Gas-Liquid Two-Phase Flow in Pipes (2006)Google Scholar
  2. 2.
    Parsi, M., Najmi, K., Najafifard, F., Hassani, S., McLaury, B.S., Shirazi, S.A.: A comprehensive review of solid particle erosion modeling for oil and gas wells and pipelines applications. J. Nat. Gas Sci. Eng. 21, 850–873 (2014)CrossRefGoogle Scholar
  3. 3.
    McLaury, B.S., Shirazi, S.A., Viswanathan, V., Mazumder, Q.H., Santos, G.: Distribution of sand particles in horizontal and vertical annular multiphase flow in pipes and the effects on sand erosion. J. Energy Res. Technol. 133(2), 023001 (2011)CrossRefGoogle Scholar
  4. 4.
    McLaury, B.S., Shirazi, S., Shadley, J.R., Rybicki, E.: How operating and environmental conditions affect erosion (1999)Google Scholar
  5. 5.
    McLaury, B.S., Shirazi, S.A.: An alternate method to API RP 14E for predicting solids erosion in multiphase flow. J. Energy Res. Technol. 122(3), 115–122 (2000)CrossRefGoogle Scholar
  6. 6.
    Mazumder, Q.H., Shirazi, S.A., McLaury, B.S.: A mechanistic model to predict erosion in multiphase flow in elbows downstream of vertical pipes. In: NACE International - CORROSION (2004)Google Scholar
  7. 7.
    Mazumder, Q.H., Shirazi, S.A., McLaury, B.: Experimental investigation of the location of maximum erosive wear damage in elbows. J. Press. Vessel Technol. 130(1), 011303 (2008)CrossRefGoogle Scholar
  8. 8.
    Mazumder, Q.H., Shirazi, S.A., McLaury, B.S.: Prediction of solid particle erosive wear of elbows in multiphase annular flow-model development and experimental validations. J. Energy Res. Technol. 130(2), 023001 (2008)CrossRefGoogle Scholar
  9. 9.
    Zhang, Y., McLaury, B.S., Shirazi, S.A., Rybicki, E.F., Nesic, S.: Predicting sand erosion in slug flows using a two-dimensional mechanistic model. In: CORROSION 2011 (2011)Google Scholar
  10. 10.
    Kesana, N., Throneberry, J., McLaury, B., Shirazi, S., Rybicki, E.: Effect of particle size and viscosity on erosion in annular and slug flow. In: ASME 2012 International Mechanical Engineering Congress and Exposition (2012)Google Scholar
  11. 11.
    Vieira, R.E., Kesana, N.R., Shirazi, S.A., McLaury, B.S.: Experiments for sand erosion model improvement for elbow in gas production, low-liquid loading and annular flow conditions. In: NACE International, Houston (2014)Google Scholar
  12. 12.
    Vieira, R.E., Parsi, M., Kesana, N.R., Shirazi, S.A., McLaury, B.S.: Effects of flow pattern and flow orientation on sand erosion in elbows for multiphase flow conditions. In: NACE International - CORROSION 2015 (2015)Google Scholar
  13. 13.
    Chen, X., McLaury, B.S., Shirazi, S.A.: A comprehensive procedure to estimate erosion in elbows for gas/liquid/sand multiphase flow. J. Energy Res. Technol. 128(1), 70–78 (2006)CrossRefGoogle Scholar
  14. 14.
    Parsi, M., Agrawal, M., Srinivasan, V., Vieira, R.E., Torres, C.F., McLaury, B.S., Shirazi, S.A.: CFD simulation of sand particle erosion in gas-dominant multiphase flow. J. Nat. Gas Sci. Eng. 27(Part 2), 1–13 (2015)CrossRefGoogle Scholar
  15. 15.
    Mansouri, A., Arabnejad, H., Karimi, S., Shirazi, S.A., McLaury, B.S.: Improved CFD modeling and validation of erosion damage due to fine sand particles. Wear 338, 339–350 (2015)CrossRefGoogle Scholar
  16. 16.
    Chen, J., Wang, Y., Li, X., He, R., Han, S., Chen, Y.: Erosion prediction of liquid-particle two-phase flow in pipeline elbows via CFD-DEM coupling method. Powder Technol. 275, 182–187 (2015)CrossRefGoogle Scholar
  17. 17.
    Oka, Y., Okamura, K., Yoshida, T.: Practical estimation of erosion damage caused by solid particle impact Part 1: effects of impact parameters on a predictive equation. Wear 259, 95–101 (1995)CrossRefGoogle Scholar
  18. 18.
    Taitel, Y., Bornea, D., Dukler, A.: Modelling flow pattern transitions for steady upward gas-liquid flow in vertical tubes. AIChE J. 26, 345–354 (1980)CrossRefGoogle Scholar
  19. 19.
    Costigan, G., Whalley, P.: Slug flow regime identification from dynamic void fraction measurements in vertical air-water flows. Int. J. Multiph. Flow 23(2), 263–282 (1997)CrossRefGoogle Scholar
  20. 20.
    Lowe, D., Rezkallah, K.: Flow regime identification in microgravity two-phase flows using void fraction signals. Int. J. Multiph. Flow 25, 433–457 (1999)CrossRefGoogle Scholar
  21. 21.
    Parsi, M., Agrawal, M., Srinivasan, V., Vieira, R., Torres, C., McLaury, B., Shirazi, S., Schleicher, E., Hampel, U.: Assessment of a hybrid CFD model for simulation of complex vertical upward gas-liquid churn flow. Chem. Eng. Res. Des. 105, 71–84 (2016)CrossRefGoogle Scholar
  22. 22.
    Parsi, M., Vieira, R., Kesana, N., McLaury, B.: Ultrasonic measurements of sand particle erosion in gas dominant multiphase churn flow in vertical pipes. Wear 328–329, 401–413 (2015)CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  • Oluwademilade Adekunle Ogunsesan
    • 1
  • Mamdud Hossain
    • 1
  • Draco Iyi
    • 1
  • Mohamed Ghazi Dhroubi
    • 1
  1. 1.School of EngineeringRobert Gordon UniversityAberdeenUK

Personalised recommendations