Advertisement

Structural Modelling of Curved Wires

  • Emanuele Marotta
  • Pietro Salvini
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

The paper deals with a closed form solution for the structural behavior of a large family of curved wires in plane. The peculiarity of the approach is to model wires through their radius of curvature, the last expressed by third order polynomials of the slope angle. Castigliano’s theorem application, based on the account of elastic bending and tensile energies, is used to get the flexibility matrix of the curved wires. Shear effects are discarded since wires are considered very slender, but axial energy is computed to get stability in stiffness evaluation, turning critical when wires align with the reference system. The realistic assumption to consider the axial elongation as negligible by respect to bending displacements, suggests the invariance of the wire length. This position is essential in the geometrical fitting of the wire. Eventually, a discrete subdivision in pieces allows to model wires presenting a variegated curvature behavior. Therefore, an optimized fitting having the objective to reduce the number of subdivisions precedes the stiffness identification. The effective geometry of the wire is updated so that non-linear behavior can be faced. Some examples and comparisons with finite element results concerns both linear solutions of complex shapes and non-linear characterization of wires, when severe change of curvature during loading occurs.

Keywords

Stiffness of curved wires Metallic mesh Curvature radius fitting 

References

  1. 1.
    Mosti, G., Partsch, H.: Bandages or double stockings for the initial therapy of venous oedema? A randomized, controlled pilot study. Eur. J. Vasc. Endovasc. Surg. 46, 142–148 (2013)CrossRefGoogle Scholar
  2. 2.
    Feindt, P., Boeken, U., Schipke, J.D., Litmathe, J., Zimmermann, N., Gams, E.: Ventricular constraint in dilated cardiomyopathy: a new, compliant textile mesh exerts prophylactic and therapeutic properties. J. Thorac. Cardiovasc. Surg. 130, 1107 (2015)Google Scholar
  3. 3.
    Li, T., Su, J.: Electrical properties analysis of wire mesh for mesh reflectors. Acta Astronaut. 69, 109–117 (2011)CrossRefGoogle Scholar
  4. 4.
    Thomson, M.W.: The AstroMesh deployable reflector. In: IUTAM-IASS Symposium on Deployable Structures: Theory and Applications, vol. 80, pp. 435–446 (2000)CrossRefGoogle Scholar
  5. 5.
    Bedukadze, G., Datashvili, L.: Some problems in ground testing of large space lightweight structures. In: Proceedings of the 2nd International Conference on Advanced Lightweight Structures and Reflector Antennas, Tbilisi, Georgia (2014)Google Scholar
  6. 6.
    Scialino, G.L., Salvini, P., Migliorelli, M.,Pennestrì, E., Valentini, P.P., Van’t Klooster, K., Santiago Prowald, J., Gloy, Y.: Structural characterization and modeling of metallic mesh material for large deployable reflectors. In: Proceedings of the 2nd International Conference on Advanced Lightweight Structures and Reflector Antennas, Tbilisi, Georgia (2014)Google Scholar
  7. 7.
    Ozawa, S.: Design concept of large deployable reflector for next generation L-band S.A.R. satellite. In: Proceedings of the 2nd International Conference on Advanced Lightweight Structures and Reflector Antennas, Tbilisi, Georgia (2014)Google Scholar
  8. 8.
    Marotta, E., De Salvador W., Pennestrì E., Salvini P., Scialino, L., Valentini, P.P.: Some problems arising during the experimental characterization of compliant knitted mesh. In: 37th ESA Antenna workshop, ESA/ESTEC (2016)Google Scholar
  9. 9.
    Kikuchi, F.: On the validity of the finite element analysis of circular arches represented by an assemblage of beam elements. Comput. Methods Appl. Mech. Eng. 5, 253–276 (1975)MathSciNetCrossRefGoogle Scholar
  10. 10.
    Tabarrok, B., Farshad, M., Yi, H.: Finite element formulation of spatially curved and twisted rods. Comput. Methods Appl. Mech. Eng. 70, 275–299 (1988)CrossRefGoogle Scholar
  11. 11.
    Marquis, J.P., Wang, T.M.: Stiffness matrix of parabolic beam element. Comput. Struct. 31(6), 863–870 (1989)CrossRefGoogle Scholar
  12. 12.
    Dahlberg, T.: Procedure to calculate deflections of curved beams. Int. J. Eng. Educ. 20(3), 503–513 (2004)Google Scholar
  13. 13.
    Tufekci, E., Arpacı, A.: Analytical solutions of in-plane static problems for non-uniform curved beams including axial and shear deformations. Struct. Eng. Mech. 22, 131–150 (2006)CrossRefGoogle Scholar
  14. 14.
    Przemieniecki, J.S.: Theory of Matrix Structural Analysis. McGraw-Hill, New York (1968)zbMATHGoogle Scholar
  15. 15.
    Lee, H.P.: Generalized stiffness matrix for a curved beam element. AIAA J. 7, 2043–2045 (1969)CrossRefGoogle Scholar
  16. 16.
    Palaninathan, R., Chandrasekharan, P.S.: Curved beam element stiffness matrix formulation. Comput. Struct. 21, 663–669 (1985)CrossRefGoogle Scholar
  17. 17.
    Marotta, E., Salvini, P.: Analytical stiffness matrix for curved metal wires. Procedia Struct. Integr. 8, 43–55 (2018)CrossRefGoogle Scholar
  18. 18.
    Leung, A.Y.T., Au, F.T.K.: Spline finite elements for beam and plate. Comput. Struct. 37, 717–729 (1990)CrossRefGoogle Scholar
  19. 19.
    Lin, K.C., Lin, C.W., Lin, M.H.: Finite deformation of 2D curved beams with variable curvatures. J. Solid Mech. Mater. Eng. 3, 876–886 (2009)CrossRefGoogle Scholar
  20. 20.
    Wu, W., Yang, X.: Geometric hermite interpolation by a family of intrinsically defined planar curves. Comput.-Aided Des. 77, 86–97 (2016)CrossRefGoogle Scholar
  21. 21.
    Farouki, R.T.: The elastic bending energy of Pythagorean-hodograph curves. Comput. Aided Geom. Des. 13, 227–241 (1996)MathSciNetCrossRefGoogle Scholar
  22. 22.
    Mutyalarao, M., Bharathi, D., Nageswara Rao, B.: Large deflections of a cantilever beam under an inclined end load. Appl. Math. Comput. 217, 3607–3613 (2010)MathSciNetzbMATHGoogle Scholar
  23. 23.
    Shvartsman, B.S.: Analysis of large deflections of a curved cantilever subjected to a tip-concentrated follower force. Int. J. Non-Linear Mech. 50, 75–80 (2013)CrossRefGoogle Scholar
  24. 24.
    Tari, H.: On the parametric deflection study of Euler_Bernoulli cantilever beams subjected to combined tip point loading. Int. J. Non-Linear Mech. 49, 90–99 (2013)CrossRefGoogle Scholar
  25. 25.
    Zienkiewicz, O.C.: The Finite Element Method. Mc Graw-Hill, New York (1977)zbMATHGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  1. 1.Department of Enterprise EngineeringUniversity of Rome “Tor Vergata”RomeItaly

Personalised recommendations