Sustainable Application of Biopolymer

  • Shih-Chen ShiEmail author
  • Jhen-Yu Wu
  • Teng-Feng Huang
  • Yao-Qing Peng


The widespread use of materials produced from petrochemical substrates, such as plastics, can exert an adverse impact on the environment, especially on creatures living therein, including fish and turtles in the sea, as well as the birds inhabiting the vicinity that may die from mistaking plastics for food. It is more concerning that these plastic components are highly likely to be returned to humans via the food chain. Therefore, for applications in either general-purpose industry or daily life, it is desirable to find a suitable green and environment-friendly alternative material with identical functionalities of plastics. The biopolymer material, hydroxypropyl methylcellulose (HPMC), extracted from high-purity tree pulp, exhibits excellent properties, such as good film formability, flexibility, grease obstruction, and gas penetrability as well as chemical stability. Therefore, it is worthwhile to evaluate the use of HPMC as an alternative material for fabricating functional thin films that are being produced from petrochemical substrates. In this study, using the SWOT (strengths, weaknesses, opportunities, threats) analysis, we analyze the application potential of HPMC-based multipurpose composite functional thin films. First, we evaluate the biocompatibility of HPMC films and then introduce functional thin film properties such as self-maintenance, corrosion resistance, anti-wear, and the tribology-enhancing mechanism of nanoparticles. Further, the paper presents the following potential directions for biopolymer applications: (1) corrosion-resistant thin films with tribological properties and (2) edible thin films with tribological properties. The objective is to reduce abrasion wear and lower the friction coefficient to enhance applicability and provide a composite functional thin film material that is corrosion-resistant and edible. In the future, it can be expected that customized and substantial application can be achieved by proposing varied enhancement factors according to various application scenarios, thus realizing the objective of substituting for petrochemical materials and the sustainable utilization of materials.


Sustainable application Biopolymer SWOT Functional coating Biopolymer 



The authors gratefully acknowledge the financial supports for this project from the Ministry of Science and Technology in Taiwan (MOST 103-2218-E-006-026, MOST 104-2221-E-006-057, MOST 105-2221-E-006-069 and MOST 106-2221-E-006-092-MY3) and supported in part by the Headquarters of University Advancement at the National Cheng Kung University, which is sponsored by the Ministry of Education, Taiwan. The authors also thank the Center for Micro/Nano Science and Technology and Instrument Center, National Cheng Kung University (NCKU), for the technical support.


  1. 1.
    Holmberg K, Andersson P, Erdemir A. Global energy consumption due to friction in passenger cars. Tribol Int. 2012;47:221–34.CrossRefGoogle Scholar
  2. 2.
    Holmberg K, Siilasto R, Laitinen T, Andersson P, Jäsberg A. Global energy consumption due to friction in paper machines. Tribol Int. 2013;62:58–77.CrossRefGoogle Scholar
  3. 3.
    Holmberg K, Andersson P, Nylund N-O, Mäkelä K, Erdemir A. Global energy consumption due to friction in trucks and buses. Tribol Int. 2014;78:94–114.CrossRefGoogle Scholar
  4. 4.
    Shi S-C, Lu F-I. Biopolymer green lubricant for sustainable manufacturing. Materials. 2016;9(5):338.CrossRefGoogle Scholar
  5. 5.
    Shi S-C, Huang T-F. Self-healing materials for ecotribology. Materials. 2017;10(1):91.CrossRefGoogle Scholar
  6. 6.
    Shi S-C, Su C-C. Corrosion inhibition of high speed steel by biopolymer HPMC derivatives. Materials. 2016;9(8):612.CrossRefGoogle Scholar
  7. 7.
    Shi S-C, Huang T-F, Wu J-Y. Preparation and tribological study of biodegradable lubrication films on Si substrate. Materials. 2015;8(4):1738–51.CrossRefGoogle Scholar
  8. 8.
    Shi S-C. Tribological performance of green lubricant enhanced by sulfidation IF-MoS2. Materials. 2016;9(10):856.CrossRefGoogle Scholar
  9. 9.
    Shi S-C, Wu J-Y, Huang T-F, Peng Y-Q. Improving the tribological performance of biopolymer coating with MoS 2 additive. Surf Coat Technol. 2016;303:250–5.CrossRefGoogle Scholar
  10. 10.
    Shi S-C, Huang T-F. Raman study of HPMC biopolymer transfer layer formation under tribology test. Opt Quant Electron. 2016;48(12):532.CrossRefGoogle Scholar
  11. 11.
    Shi S-C, Wu J-Y, Huang T-F. Raman, FTIR, and XRD study of MoS2 enhanced hydroxypropyl methylcellulose green lubricant. Opt Quant Electron. 2016;48(10):474.CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  • Shih-Chen Shi
    • 1
    Email author
  • Jhen-Yu Wu
    • 1
  • Teng-Feng Huang
    • 1
  • Yao-Qing Peng
    • 1
  1. 1.Department of Mechanical EngineeringNational Cheng Kung University (NCKU)TainanTaiwan

Personalised recommendations