Pearl Production by Implantation of Outer Epithelial Cells Isolated from the Mantle of Pinctada fucata and the Effects of Blending of Epithelial Cells with Different Genetic Backgrounds on Pearl Quality
In the current method of pearl production, the mantle fragment of a donor pearl oyster is transplanted into a host pearl oyster together with an inorganic bead (pearl nucleus). After this surgical procedure, only outer epithelial cells (OEC) in the transplanted mantle survive in a host pearl oyster and form a pearl sac to begin pearl formation. Therefore, implantation of only the OEC instead of the mantle fragment would be a possible alternative to the current procedure. To examine the potential of pearl production by implanting OEC in Pinctada fucata, we developed a cell implantation method using the pearl nucleus carrying a small pit inoculated with OEC. As a result, approximately 70% of the inserted nuclei formed the nacreous layer when the OEC were inoculated at 5 × 104 cells/nucleus. Then, OEC isolated from two genetically different types of pearl oysters that significantly differed in shell nacre color (yellowness) were mixed at four different ratios, and the prepared OEC mixtures were transplanted to investigate the effects of the blend on the yellowness of pearls to be harvested. The yellowness of harvested pearls differed significantly in accordance with the mixing ratio. Similarly, OEC isolated from two types of pearl oysters that showed a significant difference in the thickness of their shell nacre aragonite tablets were mixed at four different ratios and transplanted. Mean thickness of the aragonite tablets of the harvested pearls differed according to mixing ratio. These results suggest the method to control pearl quality by blending OEC obtained from pearl oysters genetically improved by selective breeding for traits related to pearl quality.
KeywordsPearl oyster Outer epithelial cells Implantation Blending Yellowness Aragonite tablets
Currently, the method of pearl production using pearl oyster Pinctada fucata involves transplanting a small fragment of the mantle of a donor pearl oyster into a host pearl oyster together with a small shell bead called a pearl nucleus (Masaoka et al. 2013). After transplantation, only outer epithelial cells (OEC) in the transplanted mantle fragment survive in the host pearl oyster and form a pearl sac surrounding the pearl nucleus to begin pearl formation (Awaji and Suzuki 1995). Therefore, implantation of only OEC instead of the mantle fragment would be a possible alternative to the current pearl production procedure.
Quality of a pearl is determined by various traits: size, color, luster, shape, and blemish (Jerry et al. 2012; Atsumi et al. 2014). Among these traits, color is mainly developed by the amount of yellow pigments and the interference color of pearl nacre. The amount of yellow pigment in nacre is known to be largely affected by the genetic backgrounds of a donor pearl oyster (Wada 1985). The interference color is determined by thickness of the aragonite tablets of pearl nacre, which is also affected by the genetic backgrounds of a donor pearl oyster combined with water temperature and nutritional condition of a host pearl oyster (Linard et al. 2011; Muhammad et al. 2017; Odawara et al. 2017). Therefore, if we can produce pearls by implanting OEC, it might be possible to control yellowness or the interference color of pearls by blending the OEC isolated from donor pearl oysters with different genetic backgrounds regarding these traits.
To assess the possibility of these technical improvements in pearl production, we developed a method to produce pearls by implanting OEC and examined the effects of blending of OEC isolated from donor pearl oysters with different genetic backgrounds on the yellowness and interference color of pearls.
38.2 Materials and Methods
38.2.1 Implantation of a Pearl Nucleus with Outer Epithelial Cells into a Host Pearl Oyster
38.2.2 Effects of the Blending of Outer Epithelial Cells on Yellowness of Pearls
Several strains of P. fucata genetically different in shell nacre color have been maintained at Mikimoto Pearl Research Laboratory. Among these strains, strains Y and W are significantly different in yellowness of the shell nacre, strain Y being yellowish, while strain W being whitish. We used these two strains for the experiment. OEC isolated from these strains were blended at four different mixing ratios (Y:W = 3:0, 2:1, 1:2, 0:3) and implanted for pearl production at 6.0 × 105 cells/nucleus. The host pearl oysters were reared in Ago Bay, Mie Prefecture, for 5 months until pearl harvesting. Yellowness of the harvested pearls was measured using a fast spectrophotometric color meter (CMS-35SP, Murakami Color Research Laboratory, Tokyo, Japan) and expressed as yellowness index (YI, YI=(1.250X-1.038Z)/Y), where X, Y, and Z represent tristimulus values of CIE 1931 XYZ color space, as described in Awaji et al. (2014).
38.2.3 Effects of the Blending of Outer Epithelial Cells on the Thickness of the Pearls’ Aragonite Tablets
Strains YW and BWW are genetically different in terms of thickness of shell aragonite tablets, and the interference color of shell nacre differs between these strains. OEC were isolated from these strains and blended at the same ratios as in the experiment on yellowness. The blended cells were implanted for pearl production at 5.0 × 104 cells/nucleus. The host pearl oysters were reared in Ago Bay for 5 months until pearl harvesting. Thickness of the aragonite tablets of harvested pearls was calculated from the images obtained with a color 3D laser microscope (VK-9700, Keyence Corporation, Osaka, Japan) and a scanning electron microscope (S-2380N, Hitachi High Technologies Corporation, Tokyo, Japan) using VK-H1A1 software (Keyence Corporation) and ImageJ1.50-b, respectively.
38.3.1 Pearl Production by Implantation of Outer Epithelial Cells
Nacreous pearls could be produced by the implantation of OEC, and the inoculation of 5 × 104 cells/nucleus led to formation of aragonite layers in approximately 70% of the inserted nuclei (Awaji et al. 2014). An example of the harvested pearls is shown in Fig. 38.1c.
38.3.2 Effects of the Blending of Outer Epithelial Cells on Yellowness of Pearls
38.3.3 Effects of the Blending of Outer Epithelial Cells on the Thickness of the Pearls’ Aragonite Tablets
The obtained results indicate that we could modify the color of pearls by implanting blended OEC isolated from pearl oysters with genetically different phenotypes for pearl color traits. Intermediate phenotypes observed in the blended groups suggest that OEC isolated from two different strains can survive in a host pearl oyster to form a chimeric pearl sac after the implantation. Further studies to confirm the chimeric formation of a pearl sac by the blended OEC are needed, by using, for example, genomic DNA markers that can identify the origin of OEC (Masaoka et al. 2013). The practical use of the OEC implantation for pearl culture, however, is still challenging since a pit of a pearl nucleus remains as a dimple on the surface of a harvested pearl. OEC implantation methods without making a pit on a pearl nucleus are needed.
Pearl formation by the implantation of OEC would also serve to clarify mechanisms underlying shell and pearl formation at a molecular level in combination with gene transfection technologies. Various genes and molecules have been reported to be involved in shell formation, but details of their function have remained mostly unknown. Implantation of OEC transfected with a gene of interest for its overexpression would be a novel tool to analyze functions of the target gene. Gene transfection techniques effective for OEC are now under investigation.
For pearl oysters, breeding programs to develop superior donor and host pearl oyster strains are ongoing (Jerry et al. 2012; Wada 1985). The present studies became possible because several strains that exhibit different phenotypes for nacre color traits have been established through breeding programs. Although the use of pearl oyster strains showing different phenotypes for traits related to shell structures has been uncommon in shell formation studies, they would serve as novel tools for clarifying the mechanisms that underlie shell and pearl formation in detail.
Part of this study was supported by JSPS KAKENHI Grant Numbers JP23658169, JP26292108, JP17K19282.
- Jerry DR, Kvingedal R, Lind CE, Evans BS, Taylor JJU, Safari AE (2012) Donor-oyster derived heritability estimates and the effect of genotype environment interaction on the production of pearl quality traits in the silver-lip pearl oyster, Pinctada maxima. Aquaculture 338–341:66–71CrossRefGoogle Scholar
- Odawara K, Ozaki R, Takagi M (2017) Influence of the thickness of the nacreous elemental lamina of the pearl oyster Pinctada fucata used as donor oysters on the pearls. Nippon Suisan Gakkaishi. https://doi.org/10.2331/suisan.16-00090 (in Japanese with English abstract)
- Wada KT (1985) The pearls produced from the groups of pearl oysters selected for color of nacre in shell for two generations. Bull Natl Res Inst Aquat 7:1–7 (in Japanese with English abstract)Google Scholar
Open Access This chapter is licensed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.
The images or other third party material in this book are included in the book's Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the book's Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.